• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.84-88
• /
• 2010

The main point of this study is to find ways to prevent accidents at complex linear sections in advance by improving geometric structure elements that can be considered from the designing stage. Complex linear roads are consisted of sections where straight sections connect with curved sections or sections where curved sections connect with curved sections with relatively high possibility of accidents and accidents can be reduced through improving designing elements in these sections. Therefore, this study aims to develop accident forecasting model in complex linear roads and to clarify major elements affecting traffic accidents. The results of analysis showed that the groups are divided into a group less than 355m based on curve radius of 355m, a group whose curve radius exceeds 355m and a group whose incline exceeds -0.79 and a group whose curve radius is below 355m and incline exceeds -0.79 for straight section + curved section, and for curved section + curved section, it is divided into a group whose first curved section is less than 410m based on curve radius of 410m and the first curve is turning right and a group exceeding 410m and the first curve is turning left. The major variables common in 2 models are front curve radius and curve types(left, right), road surfaces, weather.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.395-402
• /
• 2010

The seriousness of a traffic accident appears relatively higher on the curve sections compared with the straight sections due to a change in speed caused by a change in the driver's sight. In particular, the visual distortion phenomenon, one of the dangerous factors taking place on the curve sections, appears different according to the road's geometric design. Although it is a genuinely principal design factor which should be necessarily considered in designing a road, the previous researches on establishing the design standards for it have been insufficiently conducted. As a result, the establishment of the road design standards for the curve sections considering the sight distortion phenomenon is desperately required. This research examined the previous researches on the driver's behaviors, the driver's sight characteristics and the perceived curve radius on the curve sections, and developed the theoretical model of perceived curve radius to which a mathematical technique is applied in consideration of the visual distortion phenomenon on the two-lane curve sections in a local area. In addition, after the theoretical visual distortion was calculated on the basis of the theoretical model of perceived curve radius, the range of error on the theoretical recognition radius model formula was verified through comparing it with the previous researches' experiential visual distortion level and analyzing both of them. As a result, it was observed that as the curve radius practically increases in the theoretical recognition curve radius, the range of error tends to go down, which reflects well the characteristics of the curve sections on the road. Based on this research, it is expected that this research will be helpful to eliminate the safety defects when designing the curve sections and contribute to develop the road design standards considering human factors in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.663-673
• /
• 2009

Driver's perceived curve radius is different from actual curve radius at curve sections. This is called visual distortion. It has effect on operation speed according to driver's perception and finally bad effect on safety at curve sections. At present, however, there is no research on quantitatively analysis of visual distortion and no criteria for curve section design considering the visual distortion. Therefore, this study focus on finding degree of visual distortion and suggesting design criteria by visual distortion analysis. The process of this study is as below; First, a calculaiton model of perceived curve radius was developed by survey using computer simulation. In this model, a dependent variable is perceived curve radius and an independent variable is geometric factors. Second, degree of visual distortion was calculated from ratio of perceived curve radius to actual curve radius. Finally, design criteria were suggested through influencing factor analysis of visual distortion at curve sections.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.627-638
• /
• 2008

At present, there is a no rational MOE for evaluating hazard level at curve sections. Therefore, this study focus on developing the MOE and algorithm for hazard level at curve sections. The scopes of this study limited to rural two-way roads. Actual data used is accident, geometric features, safety facilities of the selected sites at curve sections. In order to develop MOE for hazard level at curve sections, accident contributing factors were classified by road geometry, visual guidance facility, speed and driver factor. A relationship between the four factors mentioned and accidents was conducted. And, the MOE for hazard level at curve sections was derived from the previous relationship analysis, and the algorithm for hazard level was developed. Finally, worksheets were suggested based on the MOE and algorithm for road designers. These developed MOE and algorithm can be used to reduce serious accident contributing factors when designing roads and also, these will be used to determine an order of priority when reconstructing roads.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.149-162
• /
• 2012

PURPOSES : The causes of traffic accidents can be classified into the factors of highway users, vehicles, and driving environments. Traffic accidents result from the deficiency in single or combination of these three factors. The objective of this study is to define the "potentially hazardous sections of highway" in terms of traffic safety considering these three factors. METHODS : The test drivers performed repeated driving on these highway sections. The drivers and passengers recorded the sections on which the driving was uncomfortable, and the speeds on the sections excluding the uncomfortable sections were used for the development of the model. RESULTS : The model is composed of three sub-models for each of the horizontal curve, tangent, and the section where the curve starts/ends. The safe driving behavior coefficients by the horizontal curvature were derived by comparing the maximum operating speeds at which the vehicle may slide or deviate and the speeds at which the drivers feel comfort. The safety speeds on tangent were derived by the length of tangent section considering the driver's desired speeds under the traffic condition on which the drivers hardly influenced by the other vehicles. For the sections where the curve starts/ends, the driving behaviors were classified by the distances between the curves, and the safe acceleration/deceleration speeds were derived on which the drivers enter/exit the curve sections safely. CONCLUSIONS : Safety speed could then be regarded that the model suggested in this study may be useful to define the potentially hazardous highway section and contribute the improvement of highway safety.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.403-412
• /
• 2011

On a curve radius, there is speed deviation because a driver who is on the curve radius can have visual distortion. The curve radius can be more dangerous than a straight radius by many reasons. Especially, visibility paralysis of delineator that is because of night and bad weather. Can pervert the information about curve sections, it threatens safety. More over accident risk is increased by influence to travel speed. Therefore, it needs to build and control delineators for driver's visibility. Therefore, this study focus on finding the two types of delineator(the retro-reflection and inside-lighting delineator) by insight-surveying and the operating speed are compared by survey and operating speed. Finally, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. Also, the study analyzes safety is guaranteed by the slight reduction of speed when the driver enters a curve radius with inside-lighting delineator. As a result, the inside-lighting delineator can give the information about horizontal and vertical profile effectively, so it can reduce the accident risk. And it can use to improve traffic safety on curve radius.

• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.77-82
• /
• 2016

PURPOSES : This paper proposes a reliability index for the safety evaluation of freeway sections. It establishes a reliability index as a safety surrogate on freeways considering speeds and speed dispersions. METHODS : We collated values of design elements including radii, curve lengths, vertical slopes (absolute values), superelevations, and vertical slopes from seven freeway sections in Korea. We also collected data about driving speeds, traffic accidents, and their deviations. We established a reliability index using these variables. RESULTS : The average radii, curve lengths, and superelevations are highly correlated with the incidence of traffic accidents. Deviations in radius and curve lengths show an especially high correlation. The reliability index, derived from speed and speed dispersions of the seven freeway sections, also correlated highly with accidents with a correlation index of 0.63. CONCLUSIONS : Since the reliability index obtained from speed and speed dispersions are highly correlated with traffic accidents, we conclude that a reliability index can be a safety surrogate on freeways considering speeds and speed dispersions together in terms of design and operational levels.

• Kyungpook Mathematical Journal
• /
• v.45 no.2
• /
• pp.167-169
• /
• 2005

Here we introduce and study vector bundles, E, on a smooth projective curve X having many "spread" sections and for which $E^{*}\;{\otimes}{\omega}X$ has many "spread" sections. We show that no such bundle exists on X if the gonality of X is too low.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.391-400
• /
• 2004

Railway curved zone have crucial effects on the speed of train. Length of transition curve is one of the important factor for alignment compatibility estimation in this sections, this value is decided by running speed and Cant. In this study, the extension method of transition curve is evaluated, based on the alignment of Jang Hang-Line, investigated field conditions of the sections in the curves exist. This research result show that changing of transition curve was proved by necessary to approximately two thirds of the curved sections, and method of fixing central point of track centerline and changing radius of curvature minimize the maximum shift in track centerline and deviation of radius, and also may be effective method for alignment suitability and speed up in case overall improvement is difficult.