• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1202-1208
• /
• 1994

On heating amorphous Pb(Fe2/3W1/3)O3 ceramics, glass transition occurred at 35$0^{\circ}C$, crystallization at 394~420, 485~550 and 540~571$^{\circ}C$ (depending on the heating rates of 2.5~8$0^{\circ}C$/min), phase transformation at 680 and 73$0^{\circ}C$, and melting at 935$^{\circ}C$. A curve-fitting computer program was made using FORTRAN, based on a kinetic equation. Reconstructed thermograms (using the program) turned out to be very close to the measured DSC results for all the heating rates, with average deviation of only 4% at maximum.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.106-115
• /
• 2000

This paper presents the measuring technique of time and velocity when rocket motor is burnt out for 2.751" rocket. This technique use doppler effect, frequency spectrum analysis and curve fitting. In this study, we use muzzle velocity radar for doppler signal acquisition, short-time fourier transform for spectrum analysis and curve fitting for smoothing.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.10
• /
• pp.604-614
• /
• 2005

Color segmentation takes great attentions since a color is an effective and robust visual cue for characterizing one object from other objects. Color segmentation is, however, suffered from color variation induced from irregular illumination changes. This paper proposes a reliable color modeling approach in HSI (Hue-Saturation-Intensity) rotor space considering intensity information by adopting B-spline curve fitting to make a mathematical model for statistical characteristics of a color with respect to brightness. It is based on the fact that color distribution of a single-colored object is not invariant with respect to brightness variations even in HS (Hue-Saturation) plane. The proposed approach is applied for the segmentation of human skin areas successfully under various illumination conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.328-334
• /
• 2001

Up to now. vibration analysis and vibration engineering have been developed, encompassing the aspects of both experimental and analytical techniques. Using experimental modal analysis or modal testing, the mode shapes and frequencies of practical structure can be measured accurately. Curve-Fitting Method is realized through experimental modal identification. In the experimental modal parameter estimation, the estimation of modal damping factor is difficult for complicated and large structure. Also numbers of Selected mode are determined before the procedure. This paper describes the vibration shape of the super-structure model of ship through experimental modal analysis.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.218-221
• /
• 2003

본 논문에서는 사전등화를 이용하는 상향링크 MC-CDMA(multicarrier-code division multiple access)/TDD(time division duplexing) 시스템에서 사전등화를 위한 상향링크 채널을 추정하는 방법들을 제안하고 시스템의 성능분석을 수행한다. 제안된 방법들에서는 하향링크 슬롯구간에서의 채널변화를 적절한 차수의 다항식으로 모델링하고, 이 다항식을 상향링크 슬롯구간으로 확장함으로써 상향링크 슬롯구간의 채널을 추정한다. 하향링크 슬롯구간에서의 채널변화는 MMSE(minimum mean squared error)curve fitting 방법이나 Lagrange 보간법 등이 사용되며 1차, 2차, 3차 다항식으로 근사화 된다. 성능지표로 정확도보다 시스템 성능이 중요 하므로 BER (bit error rate)을 사용한다. 다양한 시스템 및 채널환경에서의 모의실험 결과로부터 Lagrange 보간법은 하향링크 채널정보가 정확한 경우에는 MMSE 방법보다 성능이 다소 우수하지만 하향링크 채널추정 오류에 매우 민감하며, 2 차 다항식을 사용한 MMSE curve fitting 방법은 다양한 환경에서 우수한 성능을 가질 뿐만 아니라 채널추정 오류에도 매우 강인함을 알 수 있다.

• Journal of Power System Engineering
• /
• v.5 no.4
• /
• pp.44-52
• /
• 2001

This paper considers a modeling and identification for the MIMO magnetic bearing system. To obtain the nominal plant transfer functions, we have experimented on the frequency response by a closed-loop identification method because the system is unstable essentially. We suggest a method of curve-fitting for obtaining the transfer function from the frequency responses by using the system's modeling structure and two controllers which are different from each other. From the frequency response results, we found the effects of coupling by opposing controllers. And using this effects and the system's modeling structure, we could obtain the transfer functions of which have the same modularized denominators.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.907-918
• /
• 2006

In this study capacitance and dielectric loss factor were measured with low-voltage signal and the simulation of equivalent circuits for the data was conducted. As the result it was shown that the equivalent circuit model considered the grain-boundary structure with semiconducting layer, dielectric layer and depletion layer was well approximated with the observed data. Various parameters were determined by a optimum curve-fitting method and could be used to analyze the characteristics of varistor. It also seems that the proposed equivalent circuit model will be adopted for other BL type varistors.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.294-294
• /
• 2000

In this paper, we would like to discuss the signal processing and the algorithm for ECG analysis. The ECG gives us information about the condition of the heart muscle, because myocardial abnormality or infarction is inscribed on the ECG during myocardial depolarization and repolarization. Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. The wavelet transform decomposes the ECG signal into high and low frequency component using wavelet function. Recomposing high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the curve-fitting partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with some kinds of heart disease ECG pattern, we can detect and classify the kind of heart disease.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1836-1842
• /
• 2012

Torque is proportional to the rate of change of inductance in a switched reluctance motor (SRM), and hence, phase inductance is an important parameter in determining the behavior of an SRM. Therefore, the accurate prediction of inductance with respect to rotor position makes a significant contribution to designing an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance is predicted by means of a permeance method, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance obtained by FEA.

• Steel and Composite Structures
• /
• v.7 no.5
• /
• pp.355-376
• /
• 2007

The purpose of this study is to predict and investigate the time-dependent creep behavior of composite materials. For this, firstly the evaluation method for the modulus of elasticity of whole fiber and matrix is presented from the limited information on fiber volume fraction using the singular value decomposition method. Then, the effects of fiber volume fraction on modulus of elasticity of GFRP are verified. Also, as a creep model, the nonlinear curve fitting method based on the Marquardt algorithm is proposed. Using the existing Findley's power creep model and the proposed creep model, the effect of fiber volume fraction on the nonlinear creep behavior of composite materials is verified. Then, for the time-dependent analysis of a composite material subjected to uniaxial tension and simple shear loadings, a user-provided subroutine UMAT is developed to run within ABAQUS. Finally, the creep behavior of center loaded beam structure is investigated using the Hermitian beam elements with shear deformation effect and with time-dependent elastic and shear moduli.