• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.748-757
• /
• 2007

This paper is intended to solve the technical problem that fails in large-capacity induction motor starting due to serious voltage drop during starting period. One induction motor that is established already can reach in steady-state using reactor starting method but the voltage magnitude of PCC (point of common coupling) has dropped down a little. When the same capacity induction motor is installed additionally in the PCC, where the existing induction motor is operating, voltage drop becomes more serious by starting of additional induction motor. As a result, the additional induction motor fails in starting. Therefore, voltage compensation method is proposed so that all of two induction motors can be started completely. First, modeling technique is described in order to implement starting characteristics of large induction motor. And then, this paper proposes strategic starting scheme by proper voltage compensation that use no-load transformer tap control (NLTC) and step voltage regulator (SVR) for starting of two large induction motors successfully and improving the feeding network voltage profile during the starting period. The induction motor discussed in this paper is the pumped induction motor of 2500kVA capacity that is operating by KOWACO (Korea Water Resources Corporation). Modeling and simulation is conducted using PSCAD/EMTDC software.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.252-257
• /
• 2005

A high-brightness electron beam source for a microfocus X-ray tube has been fabricated using a carbon-nanotube (CNT) field emitter. The electron source consists of cathode that includes a CNT field emitter, a beam-extracting grid, and an anode that accelerates that electron beam. The microfocus X-ray tube requires an electron beam with the diameter of less than 5 $\mu$m and beam current of higher than 30 $\mu$A at the position of the X-ray target. To satisfy the requirements, the geometries of the field emitter tips and the electrodes of the gun was optimized by calculating the electron trajectories and beam spatial profile with EGUN code. The CNT tips were fabricated with successive steps: a tungsten wire with the diameter of 200 $\mu$m was chemically etched and was subsequently coated with CNTs by chemical vapor deposition. The experiments of electron emission at the fabricated CNT tips were performed. The design characteristics and basic experimental results of the electron source are reported.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.289-299
• /
• 2009

This study set out to analyze the perceptions of investigative police officers and division police officers regarding Police Investigation Specialization, which had been in effect for four years, identify the problems, and search for alternative policies. The results led to the following alternative policies; first, the communication among the members should be facilitated by trading the jobs between investigative policemen and division members in certain percentage regularly, integrating job education and special work, and developing diverse support programs for detective activities to provide them with opportunities to experience and understand investigation. The second suggestion concerns the investigation members' morale. There should be a range of measures to boost their moral such as allocating separate budget and personnel to support the investigation department and the treatment of major criminal and civil cases, giving each investigation team an office and investigation room to improve their working environment, readjusting the promotion ratio of Police Investigation Specialization to introduce a promotion system proper for each investigation's characteristics. The third suggestion is to secure job efficiency. It's required to reinforce the current short-term specialized education program to bring up practical and professional investigators, open the certification exam of professional investigators to all members so that every policeman can have their abilities recognized and approved as long as they have the demanded capabilities, and create a system of shedding off the members idle at work by reflecting low performance records when evaluating the members to decide who to dismiss from Police Investigation Specialization. And finally, it's important to divide duties rationally. The rationality of duties division can be guaranteed by setting the guidelines for direct handling for the team leader to help him devote himself to his duties, defining objective criteria of measuring investigation workload, and creating devoted systems and teams for simple and small accidents so that experienced investigators can deal with high-profile cases.

• Current Photovoltaic Research
• /
• v.9 no.3
• /
• pp.75-83
• /
• 2021

The tunnel oxide passivated contact (TOPCon) structure got more consideration for development of high performance solar cells by the introduction of a tunnel oxide layer between the substrate and poly-Si is best for attaining interface passivation. The quality of passivation of the tunnel oxide layer clearly depends on the bond of SiO in the tunnel oxide layer, which is affected by the subsequent annealing and the tunnel oxide layer was formed in the suboxide region (SiO, Si₂O, Si₂O₃) at the interface with the substrate. In the suboxide region, an oxygen-rich bond is formed as a result of subsequent annealing that also improves the quality of passivation. To control the surface morphology, annealing profile, and acceleration rate, an oxide tunnel junction structure with a passivation characteristic of 700 mV or more (V_oc) on a p-type wafer could achieved. The quality of passivation of samples subjected to RTP annealing at temperatures above 900℃ declined rapidly. To improve the quality of passivation of the tunnel oxide layer, the physical properties and thermal stability of the thin layer must be considered. TOPCon silicon solar cell has a boron diffused front emitter, a tunnel-SiO_x/n⁺-poly-Si/SiN_x:H structure at the rear side, and screen-printed electrodes on both sides. The saturation currents J_o of this structure on polished surface is 1.3 fA/cm² and for textured silicon surfaces is 3.7 fA/cm² before printing the silver contacts. After printing the Ag contacts, the J_o of this structure increases to 50.7 fA/cm² on textured silicon surfaces, which is still manageably less for metal contacts. This structure was applied to TOPCon solar cells, resulting in a median efficiency of 23.91%, and a highest efficiency of 24.58%, independently. The conversion efficiency of interdigitated back-contact solar cells has reached up to 26% by enhancing the optoelectrical properties for both-sides-contacted of the cells.

• Korean Journal of Comparative Education
• /
• v.28 no.6
• /
• pp.53-84
• /
• 2018

With the change of society and the rapid development of science and technology, the direction of future education and the functions of schools have changed. Also the roles and tasks of teachers are changing rapidly. As Germany entered into the 21st century, many discussions let to a consensus on the direction of future education and schooling withholding a sense of responsibility and solidarity for the education of all members of the society. As a result, standards for the training of general teachers and teachers for special education were presented. The purpose of this study is to compare the standard contents of teacher training for special education in Germany with the qualification criteria for special school, teachers in Korea, focusing on evaluation and giving as well detailed information on the examination of teachers for special school, as on basic subjects for the qualification of special school teachers for special education in Korea will be explored. As a result, the content of this study can be summarized by four items. The first one is dealing with the creation of a consciousness of solidarity and a sense of responsibility among the members of the society for the future education and the role of schools and teachers. The second item ist about including the capacity and competence of teachers in the restructuring of the school and in the minimum standards of teacher training for special education. Third, the specificity of each state (provincial and local) is considered in the content of standards for teacher training. Fourth, standards for teacher training are linked to each other, previous teacher education, trainee teacher education, and current teacher education.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.232-241
• /
• 2019

This study examines one of the conventional and controversial issues in modern finance. Specifically, this study identifies financial determinants of corporate R&D intensity for firms belonging to Korean Chaebols. Empirical estimation procedures are applied to derive more robust results of each hypothesis test. Static panel data, Tobit regression and stepwise regression models are employed to obtain significant financial factors of R&D expenditures, while logit, probit and complementary log-log regression models are used to detect financial differences between Chaebol firms and their counterparts not classified as Chaebols. Study results found the level of R&D intensity in the prior fiscal year, market-value based leverage ratio and firm size empirically showed their significance to account for corporate R&D intensity in the first hypothesis test, whereas the majority of explanatory variables had important power on a relative basis. Assuming that the current circumstances in the domestic capital market may necessitate gradual changes of Korean Chaebols in terms of their socio-economic function, the results of this study are expected to contribute to identifying financial antecedents that can be beneficial to attain optimal level of corporate R&D expenditures for Chaebol firms on a virtuous cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.71-81
• /
• 2019

To extend the potential benefits of error, the current study examined factors that affect students' error perception in the classroom. An experimental design was used to measure relations of classroom goal structure, feedback, and social relationships on students' perception of error. A total of 316 fourth-, fifth-, and sixth-grade elementary students participated as part of their regular class curriculum. Self-reported questionnaires were administered to measure students' perception of errors and relationships with teacher and peers, and then students were manipulated by classroom goal structure and feedback. Multiple regression analysis results suggested that students' perception of learning from error was affected mostly by relationships with peers, followed by relationships with teacher and the type of feedback. Students' perception of risk taking for error was also affected by relationships with peers and teacher, followed by the classroom goal structure. However, classroom goal structure and feedback did not affect their perception of thinking about error to improve their learning as well as error strain. These results imply how the classroom climate should be structured to improve perception of errors to improve student's learning.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.427-476
• /
• 2020

Park Wudang formally registered Daesoon Jinrihoe in 1969. While it shares ideas and history with other Jeungsanist groups, this paper argues that its organizational profile is unique. The two major institutional structures, the bonbu (headquarters) and the bangmyeon (branch) have together created space for the rapid development of this Korean new religion. The bonbu is a centralized hierarchy, while the bangmyeon exhibits the strong loyalty and cohesiveness of the clan. Running throughout both structural forms is the lineage concept, which is conceived here as an articulating paradigm able to operate in different organizational forms. This finely-balanced institutional structure makes a major contribution to Daesoon Jinrihoe's ability to fulfill its religious mission. The first side of this balance is the headquarters, which includes the core organization based in Yeoju as well as some outside temples and training centers. All of these were established under the direction of the Lord of Principle, the Dojeon, Park Wudang. Park Wudang also fixed the Dao Constitution, the Doheon, which serves as a blueprint for governance. From the Central Council to the various institutions for propagation, guidance, and auditing, current management practices conform closely to Park Wudang's organization vision. The second aspect of Daesoon Jinrihoe's organization is the branch structure. The larger branches, such as Yeongwol and Geumreung, are complex organizations in their own rights. The paper concludes by characterizing the two major axes of headquarters and branch as organizational types. Using Robert Quinn and Kim Cameron's institutional typology, the paper concludes that the bonbu is a classic centralized hierarchy with its focus on efficiency. The bangmyeon, in contrast, with its high level of group identity and spirit, comes approximates the clan institutional structure.

• BMB Reports
• /
• v.55 no.9
• /
• pp.465-471
• /
• 2022

Understanding and monitoring virus-mediated infections has gained importance since the global outbreak of the coronavirus disease 2019 (COVID-19) pandemic. Studies of high-throughput omics-based immune profiling of COVID-19 patients can help manage the current pandemic and future virus-mediated pandemics. Although COVID-19 is being studied since past 2 years, detailed mechanisms of the initial induction of dynamic immune responses or the molecular mechanisms that characterize disease progression remains unclear. This study involved comprehensively collected biospecimens and longitudinal multi-omics data of 300 COVID-19 patients and 120 healthy controls, including whole genome sequencing (WGS), single-cell RNA sequencing combined with T cell receptor (TCR) and B cell receptor (BCR) sequencing (scRNA(+scTCR/BCR)-seq), bulk BCR and TCR sequencing (bulk TCR/BCR-seq), and cytokine profiling. Clinical data were also collected from hospitalized COVID-19 patients, and HLA typing, laboratory characteristics, and COVID-19 viral genome sequencing were performed during the initial diagnosis. The entire set of biospecimens and multi-omics data generated in this project can be accessed by researchers from the National Biobank of Korea with prior approval. This distribution of large-scale multi-omics data of COVID-19 patients can facilitate the understanding of biological crosstalk involved in COVID-19 infection and contribute to the development of potential methodologies for its diagnosis and treatment.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.515-524
• /
• 2022

The turnout system of the sleeper floating tracks (STEDEF) on urban transit is a Anti-vibration track composed of a wooden sleeper embedded in a concrete bed and a sleeper resilience pad under the sleeper. Therefore, deterioration and changes in spring stiffness of the sleeper resilience pad could be cause changes in sleeper support conditions. The damage amount of manganese crossings that occurred during the current service period of about 21 years was investigated to be about 17% of the total amount of crossings, and it was analyzed that the damage amount increased after 15 years of use (accumulated passing tonnage of about 550 million tons). In this study, parameter analysis (wheel position, sleeper support condition, and dynamic wheel load) was performed using a three-dimensional numerical model that simulated real manganese crossing and wheel profile, to analyze the damage type and cause of manganese crossing that occurred in the actual field. As a result of this study, when the voided sleeper occurred in the sleeper around the nose, the stress generated in the crossing nose exceeded the yield strength according to the dynamic wheel load considering the design track impact factor. In addition, the analysis results were evaluated to be in good agreement with the location of damage that occurred in the actual field. Therefore, in order to minimize the damage of the manganese crossing, it is necessary to keep the sleeper support condition around the nose part constant. In addition, by considering the uniformity of the boundary conditions under the sleepers, it was analyzed that it would be advantageous to to replace the sleeper resilience pad together when replacing the damaged manganese crossing.