DOI QR코드

DOI QR Code

A Review on TOPCon Solar Cell Technology

  • Yousuf, Hasnain (Interdisciplinary Program in Photovoltaic System Engineering, Sungkyunkwan University) ;
  • Khokhar, Muhammad Quddamah (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Chowdhury, Sanchari (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Pham, Duy Phong (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Kim, Youngkuk (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Ju, Minkyu (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Cho, Younghyun (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Cho, Eun-Chel (Department of Electrical and computer Engineering, Sungkyunkwan University) ;
  • Yi, Junsin (Department of Electrical and computer Engineering, Sungkyunkwan University)
  • 투고 : 2021.06.15
  • 심사 : 2021.09.03
  • 발행 : 2021.09.30

초록

The tunnel oxide passivated contact (TOPCon) structure got more consideration for development of high performance solar cells by the introduction of a tunnel oxide layer between the substrate and poly-Si is best for attaining interface passivation. The quality of passivation of the tunnel oxide layer clearly depends on the bond of SiO in the tunnel oxide layer, which is affected by the subsequent annealing and the tunnel oxide layer was formed in the suboxide region (SiO, Si2O, Si2O3) at the interface with the substrate. In the suboxide region, an oxygen-rich bond is formed as a result of subsequent annealing that also improves the quality of passivation. To control the surface morphology, annealing profile, and acceleration rate, an oxide tunnel junction structure with a passivation characteristic of 700 mV or more (Voc) on a p-type wafer could achieved. The quality of passivation of samples subjected to RTP annealing at temperatures above 900℃ declined rapidly. To improve the quality of passivation of the tunnel oxide layer, the physical properties and thermal stability of the thin layer must be considered. TOPCon silicon solar cell has a boron diffused front emitter, a tunnel-SiOx/n+-poly-Si/SiNx:H structure at the rear side, and screen-printed electrodes on both sides. The saturation currents Jo of this structure on polished surface is 1.3 fA/cm2 and for textured silicon surfaces is 3.7 fA/cm2 before printing the silver contacts. After printing the Ag contacts, the Jo of this structure increases to 50.7 fA/cm2 on textured silicon surfaces, which is still manageably less for metal contacts. This structure was applied to TOPCon solar cells, resulting in a median efficiency of 23.91%, and a highest efficiency of 24.58%, independently. The conversion efficiency of interdigitated back-contact solar cells has reached up to 26% by enhancing the optoelectrical properties for both-sides-contacted of the cells.

키워드

과제정보

This work was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (20203040010320) and (20183010014270).

참고문헌

  1. Hermle, M., "Silicon solar cells-current production and future concepts," Fraunhofer Institute for Solar Energy Systems ISE (2017).
  2. Stenzel, F., Lee, B.G., Cieslak, J., Schwabedissen, A., Wissen, D., Geissler, S., Rudolph, T., Faulwetter-Quandt, B., Honig, R., Wasmer, S., Bakowskie, R., "Exceeding 23% and mass production of p-Cz Q. ANTUM bifacial solar cells, 36th European Photovoltaic Solar Energy Conference and Exhibition, pp. 96-99 (2019).
  3. Rahman, M.Z., "Advances in surface passivation and emitter optimization techniques of c-Si solar cells," Renewable and Sustainable Energy Reviews, Vol. 30, pp. 734-742 (2014). https://doi.org/10.1016/j.rser.2013.11.025
  4. Feldmann, F., Bivour, M., Reichel, C., Hermle, M., Glunz, S.W., "Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics," Solar energy materials and solar cells, Vol. 120, pp. 270-274 (2014). https://doi.org/10.1016/j.solmat.2013.09.017
  5. Cousins, P.J., Smith, D.D., Luan, H.C., Manning, J., Dennis, T.D., Waldhauer, A., Wilson, K.E., Harley, G., Mulligan, W.P., "Generation 3: Improved performance at lower cost," 35th IEEE Photovoltaic Specialists Conference, pp. 000275-000278, IEEE (2010).
  6. Richter, A., Benick, J., Feldmann, F., Fell, A., Hermle, M., Glunz, S.W., "n-Type Si solar cells with passivating electron contact: Identifying sources for efficiency limitations by wafer thickness and resistivity variation," Solar Energy Materials and Solar Cells, Vol. 173, pp. 96-105 (2017). https://doi.org/10.1016/j.solmat.2017.05.042
  7. Green, M.A., Hishikawa, Y., Dunlop, E.D., Levi, D.H., Hohl-Ebinger, J., Ho-Baillie, A.W., "Solar cell efficiency tables (version 51)," Progress in Photovoltaics: Research and Applications, Vol. 26, No. 1, pp. 3-12 (2018). https://doi.org/10.1002/pip.2978
  8. Haase, F., Hollemann, C., Schafer, S., Merkle, A., Rienacker, M., Krugener, J., Brendel, R., Peibst, R., "Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells," Solar Energy Materials and Solar Cells, Vol. 186, pp. 184-193 (2018). https://doi.org/10.1016/j.solmat.2018.06.020
  9. Stodolny, M.K., Lenes, M., Wu, Y., Janssen, G.J.M., Romijn, I.G., Luchies, J.R.M., Geerligs, L.J., "n-Type polysilicon passivating contact for industrial bifacial n-type solar cells," Solar Energy Materials and Solar Cells, Vol. 158, pp. 24-28 (2016). https://doi.org/10.1016/j.solmat.2016.06.034
  10. Nandakumar, N., Rodriguez, J., Kluge, T., GroBe, T., Fondop, L., Padhamnath, P., Balaji, N., Konig, M., Duttagupta, S., "Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD," Progress in Photovoltaics: Research and Applications, Vol. 27, No. 2, pp. 107-112 (2019).
  11. Merkle, A., Seren, S., Knauss, H., Min, B., Steffens, J., Terheiden, B., Brendel, R., Peibst, R., "Atmospheric pressure chemical vapor deposition of in-situ doped amorphous silicon layers for passivating contacts," 35th European Photovoltaic Solar Energy Conference and Exhibition, pp. 785-791 (2018).
  12. http://unsworks.unsw.edu.au/fapi/datastream/unsworks:58 583/SOURCE02?view=true (accessed on 14-05-2021)
  13. Stodolny, M.K., Anker, J., Geerligs, B.L., Janssen, G.J., Van De Loo, B.W., Melskens, J., Santbergen, R., Isabella, O., Schmitz, J., Lenes, M., Luchies, J.M., "Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells," Energy Procedia, Vol. 124, pp. 635-642 (2017). https://doi.org/10.1016/j.egypro.2017.09.250
  14. Padhamnath, P., Wong, J., Nagarajan, B., Buatis, J.K., Ortega, L.M., Nandakumar, N., Khanna, A., Shanmugam, V., Duttagupta, S., "Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts," Solar Energy Materials and Solar Cells, Vol. 192, pp. 109-116 (2019). https://doi.org/10.1016/j.solmat.2018.12.026
  15. Feldmann, F., Reichel, C., Muller, R., Hermle, M., "The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells," Solar Energy Materials and Solar Cells, Vol. 159, pp. 265-271 (2017). https://doi.org/10.1016/j.solmat.2016.09.015
  16. Mekhilef, S., Safari, A., Mustaffa, W.E.S., Saidur, R., Omar, R., Younis, M.A.A., "Solar energy in Malaysia: Current state and prospects," Renewable and Sustainable Energy Reviews, Vol. 16, No. 1, pp. 386-396 (2012). https://doi.org/10.1016/j.rser.2011.08.003
  17. Chen, D., Chen, Y., Wang, Z., Gong, J., Liu, C., Zou, Y., He, Y., Wang, Y., Yuan, L., Lin, W., Xia, R., "24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design," Solar Energy Materials and Solar Cells, Vol. 206, pp. 110258:1-8 (2020).
  18. Chen, Y., Chen, D., Liu, C., Wang, Z., Zou, Y., He, Y., Wang, Y., Yuan, L., Gong, J., Lin, W., Zhang, X., "Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W," Progress in Photovoltaics: Research and Applications, Vol. 27, No. 10, pp. 827-834 (2019). https://doi.org/10.1002/pip.3180
  19. Romer, U., Peibst, R., Ohrdes, T., Lim, B., Krugener, J., Bugiel, E., Wietler, T., Brendel, R., "Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/monocrystalline Si junctions," Solar Energy Materials and Solar Cells, Vol. 131, pp. 85-91 (2014). https://doi.org/10.1016/j.solmat.2014.06.003
  20. Yan, D., Cuevas, A., Bullock, J., Wan, Y., Samundsett, C., "Phosphorus-diffused polysilicon contacts for solar cells," Solar Energy Materials and Solar Cells, Vol. 142, pp. 75-82 (2015). https://doi.org/10.1016/j.solmat.2015.06.001
  21. Rohatgi, A., Zimbardi, F., Rounsaville, B., Benick, J., Stradins, P., Norman, A., Lee, B., Upadhyaya, A., Ok, Y.W., Tao, Y., Tam, A., "Overcoming the Fundamental Bottlenecks to a new world-record silicon solar cell. Final Technical Report (No. DOE-GT-6336)," Georgia Inst. of Technology, Atlanta, GA (United States) (2017).
  22. Green, M.A., Dunlop, E.D., Hohl-Ebinger, J., Yoshita, M., Kopidakis, N., Ho-Baillie, A.W., "Solar cell efficiency tables (Version 55), Progress in Photovoltaics: Research and Applications, Vol. 28, No. 1, pp. 3-15 (2020). https://doi.org/10.1002/pip.3228
  23. Younis, I.M., "Cost benefit analysis of photovoltaic technology adoption at rest and service area for malaysia highway," Doctoral dissertation, Universiti Teknologi Malaysia (2019).
  24. Lauinger, T., Schmidt, J., Aberle, A.G., Hezel, R., "Record low surface recombination velocities on 1 Ω cm p-silicon using remote plasma silicon nitride passivation," Applied Physics Letters, Vol. 68, No. 9, pp. 1232-1234 (1996). https://doi.org/10.1063/1.115936
  25. Grant, N.E., Markevich, V.P., Mullins, J., Peaker, A.R., Rougieux, F., Macdonald, D., Murphy, J.D., "Permanent annihilation of thermally activated defects which limit the lifetime of float-zone silicon," Physica status solidi (a), Vol. 213, No. 11, pp. 2844-2849 (2016). https://doi.org/10.1002/pssa.201600360
  26. Feldmann, F., Steinhauser, B., Arya, V., Buchler, A., Brand, A.A., Kluska, S., Hermle, M., Glunz, S.W., "Evaluation of TOPCon technology on large area solar cells," 33rd European Photovoltaic Solar Energy Conference Exhibition, pp. 1-3 (2017).
  27. Lindekugel, S., Lautenschlager, H., Ruof, T., Reber, S., "Plasma hydrogen passivation for crystalline silicon thin-films," 23rd European Photovoltaic Solar Energy Conference, pp. 2232- 2235 (2008).
  28. Richter, A., Glunz, S.W., Werner, F., Schmidt, J., Cuevas, A., "Improved quantitative description of Auger recombination in crystalline silicon," Physical Review B, Vol. 86, No. 16, pp. 165202:1-14 (2012).
  29. Feldmann, F., Fellmeth, T., Steinhauser, B., Nagel, H., Ourinson, D., Mack, S., Lohmuller, E., Polzin, J.I., Benick, J., Richter, A., Moldovan, A., "Large area TOPCon cells realized by a PECVD tube process," 36th European Photovoltaic Solar Energy Conference and Exhibition (2019).
  30. https://www.infolink-group.com/en/solar/analysis-trends/N-type-technology (accessed on 14-05-2021)
  31. https://www.energytrend.com/research/20210105-20519.html (accessed on 14-05-2021)
  32. Richter, A., Muller, R., Benick, J., Feldmann, F., Steinhauser, B., Reichel, C., Fell, A., Bivour, M., Hermle, M., Glunz, S.W., "Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses," Nature Energy, pp. 1-10 (2021).
  33. Park, C., Balaji, N., Ahn, S., Park, J., Cho, E.C., Yi, J., "Effects of tunneling oxide defect density and inter-diffused carrier concentration on carrier selective contact solar cell performance: Illumination and temperature effects," Solar Energy, Vol. 211, pp. 62-73 (2020). https://doi.org/10.1016/j.solener.2020.09.060