• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.55-62
• /
• 2002

With lower quality and three to four times higher price than those of imported malting barley, the competitiveness of domestic malting barley is decreasing. Although the causes can be found in that the domestic environments are much unfavorable to cultivate the malting barley compared with those of USA or Canada, it is mainly reasoned from poorer developments in variety of high quality malting barley as well as in cultivation technology. For assuring the competitiveness of domestic malting barley, therefore, not only the development of high quality malting barley suitable to the climatic environment of this country but also the political supports of the government are required. Also, in addition to the breeding of the good quality malting barley haying higher germinative energy, and heavier and larger kernels of good plumpness as well as lower protein content, the modification of quality inspection standards from the system relying only on the visual characteristics such as kernel size distribution rate, shrimped kernel rate, foreign materials and so on, to such system as those of developed countries haying quality criteria such as protein content for inspection is absolutely required for the quality improvement of domestic malting barley.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.104-112
• /
• 2023

Agriculture plays an industrial and economic role, as well as an environmental and ecological conservation role, group harmony and the inheritance of traditional culture. However, no matter how advanced the industry is, the basic food necessary for human life can only be produced through the photosynthesis of plants with natural resources such as the sun, water, and air. The Food and Agriculture Organization of the United Nations (FAO) predicts that the world's population will increase by another 2 billion people by 2050, and it faces a myriad of complex and diverse factors to consider, including climate change, food security concerns, and global ecosystems and political factors. In particular, in order to solve problems such as increasing productivity and production of agricultural products, improving quality, and saving energy, it is difficult to solve them with traditional farming methods. Recently, with the wind of the 4th industrial revolution, ICT convergence technology and artificial intelligence have been rapidly developing in many fields, but it is also true that the application of new technologies is somewhat delayed due to the unique characteristics of agriculture. However, in recent years, as ICT and artificial intelligence utilization technologies have been developed and applied by many researchers, a revolution is also taking place in agriculture. This paper summarizes the current state of research so far in four categories of agriculture, namely crop cultivation environment management, soil management, pest management, and irrigation management, and smart farm research data that has recently been actively developed around the world.

• Journal of Forest and Environmental Science
• /
• v.36 no.2
• /
• pp.156-162
• /
• 2020

This study was conducted to analyze the current management status of green tea processors in two regions (Hadong-gun and Boseong-gun) in Korea and to suggest directions for the development of the green tea industry based on an understanding their difficulties in management. This study showed that the number of green tea farms and the cultivation area had decreased, while the average unit sales price of green tea in Boseong-gun was approximately three times higher than that in Hadong-gun. Also, this study found that Hadong-gun mainly provided green tea products to wholesalers, whereas Boseong-gun sold it directly to the local retail stores targeting tourists, and this results in generating relatively higher unit prices. Meanwhile, we discovered that both regions had difficulties in management which were caused by the demand for low delivery unit costs from large corporations and small food companies. Therefore, in order to develop the green tea industry in both regions, the size of green tea fields and the scenery satisfaction should be improved to draw more tourists and boost tourists' intention to revisit. In addition, it is necessary to enhance guidance and accessibility of related tourist sites, to expand green tea experience activities, and to improve product satisfaction by developing various goods. By inducing more tourists in these ways, it could change the sales type of green tea from wholesale to retail and help activate the management of green tea processors.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.511-516
• /
• 2003

Computer vision technology has been utilized as one of the most powerful tools to automate various agricultural operations. Though it has demonstrated successful results in various applications, the current status of technology is still for behind the human's capability typically for the unstructured and variable task environment. In this paper, a man-machine interactive hybrid decision-making system which utilized a concept of tole-operation was proposed to overcome limitations of computer image processing and cognitive capability. Tasks of greenhouse watermelon cultivation such as pruning, watering, pesticide application, and harvest require identification of target object. Identifying water-melons including position data from the field image is very difficult because of the ambiguity among stems, leaves, shades. and fruits, especially when watermelon is covered partly by leaves or stems. Watermelon identification from the cultivation field image transmitted by wireless was selected to realize the proposed concept. The system was designed such that operator(farmer), computer, and machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. And the developed system was composed of the image monitoring and task control module, wireless remote image acquisition and data transmission module, and man-machine interface module. Once task was selected from the task control and monitoring module, the analog signal of the color image of the field was captured and transmitted to the host computer using R.F. module by wireless. Operator communicated with computer through touch screen interface. And then a sequence of algorithms to identify the location and size of the watermelon was performed based on the local image processing. And the system showed practical and feasible way of automation for the volatile bio-production process.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.249-267
• /
• 2018

The US cybersecurity workforce policy is being pursued comprehensively and systematically, based on the NICE established initiated in 2010. Security Technologies, one of the eight areas of Advanced Technology Education(ATE) of the National Science Foundation(NSF) included in the STEM. This policy has been comprehensively promoted in conjunction with NICE, and this security technology field is operated with five detailed programs. In this paper, we examine in detail five cybersecurity workforce development programs supported by ATE, and compare them with the current status cultivation of cybersecurity workforce in Korea. After finding out the problems and improvements by comparison with the current situation of cybersecurity workforce development in Korea, we propose several implementations of nation-wide strategies for cultivating new cybersecurity workforce in Korea.

• Journal of the Korean Society of School Health
• /
• v.1 no.2
• /
• pp.86-117
• /
• 1988

The purpose of school lunch service programs (SLPs) is to provide school children with nutritious meals each day, to assist them in improving their mental and physical development, to make them understand the basic knowledge needed for healthy daily living throughout their lives with sound nutritional habits, and further, to enhance the national health status as well as the individual. The major purpose of this study is to describe the history and current status and promotional plans in Korea's SLSPs to improve the nation's health status. The major findings of this study are as follow: 1) The progression of the SLSPs can be devided into four major periods: Relief (1953-1972), Self-supportive (1973-1977), System-establishment (1973-1983), System-development(1984- ). 2) As result of the implementation of SLSPs in Korea, many positive effects have been found in school education, notably in the field of physical growth, social development and personality cultivation. 3) This study deals with a more detailed assessment with regard to the effects of the program on school education activities and the improvement of nutritional habits in the family. Although it is limited and not yet complete, the program implementation has contributed to the improvement in children's food-intake habits, understanding of food, and manners, and increased sanitary consciousness. It has also affected of parent's concerns and attitudes towards the improvement of daily meals as well as national eating patterns, and eventually provided motivation for increased farm production of nutritious food stuffs and reasonable food consumption. 4) The SLSPs does have its stare of problem such as an unsatisfactory budget, lack of understanding of the program by school personnel and parents. However, there is no doubt that the SLSPs should be carried out effectively for better health, and especially for the growth and development of the children. Finally, the problems and promotive Plans of the SLSPs can be approached by aspects of the administrative, financial and operational systems. These system have to coordinate with relevant authorities to expand participation in the program for the successful implementation of the SLSPs. The eventual objective this study is to propose ways and means for mobilizing every available element in the effort to attain the goals of educating and training healthy and competent personnel manpower, stabilizing the demand and supply of food and the ensuring adequate coordination of national food production and consumption.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.95-99
• /
• 2013

To investigate the actual condition of production and management of sod, a questionnaire was ask to 57 farmers in major cultivated areas of turf sod in Korea in 2010 and 2011. The results of the turfgrass management situation analysis showed a mixed farming where the ratio of the principal work and the side work progress similarly, and for the landholding type depending on the management scale, the rental ratio was high for a scale over 0.5 ha. Sod production farmers has high-profile in new varieties of turfgrass, integrated management of the fertilization and soil or disease and insect pest however the future of the turfgrass industry does not seem optimistic due to the problems such as market stability or scarcity of worker. Obtaining of information on culture methods depended neighbor's experience (81.8%). Concerning the varieties preference analysis, the 32.1% of farmer answered that the reproductive rate was a key factor for the new variety. Sod production farmers want to receive financial support (28.1%), improvement of distribution structure of sod (26.6%), and spread of good variety turfgrass (23.4%).

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.91-115
• /
• 1996

In the recent years, protected horticultural facilities have been modernized and glasshouses are also propagating in Korea, even most vegetables production are conducted in the traditional plastic houses covered with, for example, PVC film for just temperature keeping. It would limit the productivity and competitivity of the vegetable production industry without automatization and high quality year round production. A plant factory, aimed to produce vegetables in the limited areas, was initiated in Christensen farm, Denmark in 1957, and widely propagated in some developed countries. As it has the automatized system which enables to keep optimized environment conditions, it will be the best facility for high quality products as well as year round planned production. However, we have not even started the plant factory production. Since the plant factory is requiring lots of resources, besides plant cultivation technologies, such as environment control, automatic engineering and robotics, our approach to the development of plant factories should be minded on Practical Plant Factories considering our current farming practices and least capital needs rather than blindly employing the advanced technologies from developed countries. Thus, Korean plant factory development can be initiated with year round leaf vegetables production in NFT or DFT cultivation system instead of the moval bed system, in which aerial environment factors such as light, temperature, humidity and CO$_2$ concentration and root environment ones such as solution concentration, temperature, pH and water soluble oxygen shall be automatically controlled. And the seeding, seedling and transplanting operations shall be accomplished in the house entrance, and the harvesting and grading opreations shall be conducted in the house exit. For practical plant factories, environment control technologies including artificial light source, illumination and air conditioning, automatic management for nutrient solution and automatic production line of moval bed system, transplanting and harvest should be developed along with researches on the cost reduction of factory building construction.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.95-108
• /
• 2014

The objective of this study is to develop the plastic greenhouse models which are structurally safe under the weather condition of Seongju and have the dimensions suitable for oriental melon cultivation as well. To grasp the structural features of greenhouses in Seongju, the field survey was conducted on 406 farmhouses which included 2,068 greenhouses. The field survey showed that the roof shape of arch type accounted for the highest rate, but recently even span or peach type became more popular and the width and height of greenhouse tended to increase as the period of use was short. The relationship of the width, ridge height and eaves height were established based on field survey data. Using climate data of Gumi adjacent to Seongju, the regressions were determined for the design wind speed and design snow depth depending on recurrence period. To design the greenhouse models against weather disasters in Seongju, the optimal design loads are 23.7 cm of snow depth and $33.8m{\cdot}s^1$ of wind speed. As the design results, four models of single-span greenhouse, two models of double-span greenhouses including extension were developed.