• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.284-289
• /
• 2005

Changes of crosslink densities of resole-cured NR composites by thermal aging were studied. The thermal aging was performed at $50-90^{\circ}C$. The crosslink density change increased with increase of the aging temperature and then decreased. Level of the crosslink density change decreased with increase of the resole content. Increase of the crosslink density by the thermal aging was explained with the formations of new crosslinks by combination reactions of pendent groups terminated by resoles and crosslinking reactions by pendent groups having methylol or o-methylene quinone intermediate. And decrease of the crosslink density by the thermal aging was explained with the dissociations of the existing crosslinks having dimethylene ether linkages.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.275-284
• /
• 2003

The positive temperature coefficient (PTC) effects of high density polyethylene (HDPE)/carbon black composite materials were investigated by enhancing adhesive characteristics of electrodes and controlling HDPE chemical crosslinking. When the silver paste was used as an electrode for the same 45 wt% HDPE/carbon composites, the resistance was over 1 $\Omega$, which should be compared with the resistance of 0.2 $\Omega$ for the dendritic copper electrode. In general, the silver-paste electrode exhibited higher electrical resistance than cupper electrode due to the interfacial resistance between the electrode and PTC composites. The HDPE/carbon composite exhibited typical PTC characteristics maintaining a constant resistance up to vicat point and showing a maximum at the melting point of HDPE. The crosslinked HDPE significantly decreased the negative temperature coefficient (NTC) phenomena, and desirably showed a constant or slightly increasing feature of electrical resistance in the high temperature region.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.8-15
• /
• 2008

Microcapsules have been widely used in cosmetics and pharmacology as controlled delivery devices of various active materials. Chitosan is the second most plentiful natural biopolymer with biocompatibility and nontoxicity. The chitosan microcapsules were prepared by the water-in-oil (W/O) emulsion method using glutaraldehyde as a crosslinking agent. Span80 was used as an emulsifier, and mineral oil was used as a medium material. Perfectly spherical microcapsules were obtained in the size range of $2{\sim}10{\mu}m$. The effects of emulsifier concentration and stirring speed on the average particle size and distribution were investigated. Encapsulation and release behavior of the microcapsules with different amount of the crosslinking agent (glutaraldehyde), different chitosan contents and different emulsifier concentration conditions were also investigated. The release rate of riboflavin was controlled by the crosslinking density of the chitosan and amount of emulsifier in the preparation of the microcapsule.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.75-81
• /
• 2012

Acrylic rubber was synthesized using ethyl acrylate. butyl acrylate, methoxyethyl acrylate as main monomers and glycidyl methacrylate as cure site monomer by emulsion polymerization. Rubber compound was made by adding 2,2-bis[4-(4-aminophenoxy)phenyl]propane as crosslinking agent. Increase of ethyl acrylate content in the main monomer ratio resulted in enhancement of heat resistance due to decrease of glass transition temperature in acrylic rubber. And also oil resistance was increased with increasing content of ethyl acrylate because ethyl acrylate has the highest ester concentration in the three main monomers. With content of 2,2-bis[4-(4-aminophenoxy)phenyl]propane, both tensile strength and elongation were increased until 2 phr, but in higher content than that, they decreased owing to reduction of viscosity and elongation by increase of crosslinking density.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.981-985
• /
• 2006

Novel copolymers consisting of poly(2-hydroxyethyl aspartamide-co-N,N'-dimethyl-1,3-propane aspartamide) (PHEA-DPA) were prepared from polysuccinimide (PSI), which is the thermal polycondensation product of aspartic acid, via a ring-opening reaction with N,N'-dimethyl-1,3-propane diamine (DPA) and ethanolamine. The prepared water-soluble copolymer was then crosslinked by reacting it with hexamethylene diisocyanate to provide the corresponding gel. The swelling behavior and morphology of the crosslinked hydrogels were investigated. The degree of swelling decreased with increasing crosslinking reagent due to the higher crosslinking density. It was also confirmed that the swelling property is affected by pH. At low pH (< pH 4), swelling is increased due to the ionization of DPA with a tertiary amine moiety. In addition, a reversible swelling and de-swelling behavior was demonstrated by adjusting the pH of the solution. The prepared hydrogels showed a well-interconnected microporous structure with regular 5-20 $\mu$m sized pores.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.424-428
• /
• 2008

We prepared an ionic gel polymer electrolyte for dye-sensitized solar cells (DSSCs) without leakage problem. Triiodide compound (BTDI) was synthesized by the reaction of benzene tricarbonyl trichloride with diethylene glycol monotosylate and subsequent substitution of tosylate by iodide using NaI. Bisimidazole was prepared by the reaction of imidazole with the triethylene glycol ditosylate under strongly basic condition provided by NaH. BTDI and bisimidazole dissolved in an ionic liquid were injected into the cells and permeated into the $TiO_2$ nanopores. In situ crosslinking was then carried out by heating to form a network structure of poly(imidazolium iodide), thereby converting the ionic liquid electrolytes to a gel or a quasi-solid state. A monomer (BTDI and bisimidazole) concentration in the electrolytes of as low as 30 wt% was sufficient to form a stable gel type electrolyte. The DSSCs based on the gel polymer electrolytes showed a power conversion efficiency of as high as 1.15% with a short circuit current density of $5.69\;mAcm^{-2}$, an open circuit voltage of 0.525 V, and a fill factor of 0.43.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.281-287
• /
• 2012

Poly(phenylene sulfide) films containing acetophenone as a photoinitiator were photocrosslinked under UV irradiation using a continuous UV irradiator. The gel fraction of the irradiated PPS in 1-Chloro naphthalene reached 94.7% with increasing UV energy and the photoinitiator concentration in the film upto $200J/cm^2$ and 12wt% respectively. Solid state $^1C$ NMR analysis suggested that the crosslinking occurred between the phenylene chains in PPS, indicating that the acetophenone may the phenylene hydrogens and subsequently adjacent polymer radicals could be recombined to form the crosslinked structure. The crosslinking improved the thermal behavior of PPS such as loss of $T_g$ and $T_c$, higher melting point and lower melting enthalphy as well as significantly higher peak pyrolysis temperature as much as $63.5^{\circ}C$. Surprisingly the tensile toughness of the most crosslinked PPS increased by 842%, resulting from the substantial enhancements in tensile modulus, strength and strain as much as 76%, 236% and 240% respectively. Also dynamic mechanical measurement indicated that the distance between crosslinks in the crosslinked PPS reached 85.3 g/mol corresponing to a crosslink density of 0.012 mol/g.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.580-584
• /
• 2009

The effects of crystallinity and radiation crosslinking on the physical properties of a microporous high density polyethylene (HDPE) film with Millad3988 as a nucleating agent were investigated. The pores of the HDPE film were affected by the crystallinity. The crystallinity of the HDPE films increased with increasing Millad3988 amount up to 0.1 wt% but decreased with further addition. The mechanical characteristics of the HDPE containing Millad3988 films improved with increasing irradiation dose up to 50 kGy, but decreased at 75 kGy due to severe degradation. The thermal shrinkage behavior of the HDPE films decreased with increasing radiation dose up to 50 kGy. The porosity of the stretched HDPEIMillad3988 films after ${\gamma}$-ray radiation increased with increasing y-ray radiation dose up to 50 kGy. The pores of the irradiated films were formed more easily by a stretching due to the formation of a crosslinked structure.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.131-136
• /
• 2002

As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.27-32
• /
• 2023

Liquid silicon rubber (LSR) has fine thermal compatibility and is widely used in various fields such as medical care and automobiles because it is easy to implement products with good fluidity. With the recent development of flexible sensors, the focus has been on manufacturing conductive elastomers, such as silicone as elastic materials, and carbon black, CNT, and graphene are mainly used as nanomaterials that impart conductive phases. In this study, mechanical behavior and curing behavior were measured and analyzed to manufacture a CB-LSR complex by adding Carbon Black to LSR and to identify properties. As a result of the compression test, the elastic modulus tended to increase as carbon black was added. When the swelling test and the compression set test were conducted, the swelling rate tended to decrease as the content of carbon black increased, and the compression set tended to increase. In addition, DSC measurements showed that the total amount of reaction heat increased slightly as the carbon black content increased. It is considered that carbon black was involved in the crosslinking of LSR to increase the crosslinking density and have a positive effect on oil resistance reinforcement.