Browse > Article
http://dx.doi.org/10.5764/TCF.2012.24.4.281

The Improvement of Thermal Stability and Tensile Toughness by the Photocrosslinking of Poly(phenylene sulfide) containing Acetophenone  

Jang, Yong-Joon (Department of Materials Design Engineering, Kumoh National Institute of Technology)
Jang, Jinho (Department of Materials Design Engineering, Kumoh National Institute of Technology)
Publication Information
Textile Coloration and Finishing / v.24, no.4, 2012 , pp. 281-287 More about this Journal
Abstract
Poly(phenylene sulfide) films containing acetophenone as a photoinitiator were photocrosslinked under UV irradiation using a continuous UV irradiator. The gel fraction of the irradiated PPS in 1-Chloro naphthalene reached 94.7% with increasing UV energy and the photoinitiator concentration in the film upto $200J/cm^2$ and 12wt% respectively. Solid state $^1C$ NMR analysis suggested that the crosslinking occurred between the phenylene chains in PPS, indicating that the acetophenone may the phenylene hydrogens and subsequently adjacent polymer radicals could be recombined to form the crosslinked structure. The crosslinking improved the thermal behavior of PPS such as loss of $T_g$ and $T_c$, higher melting point and lower melting enthalphy as well as significantly higher peak pyrolysis temperature as much as $63.5^{\circ}C$. Surprisingly the tensile toughness of the most crosslinked PPS increased by 842%, resulting from the substantial enhancements in tensile modulus, strength and strain as much as 76%, 236% and 240% respectively. Also dynamic mechanical measurement indicated that the distance between crosslinks in the crosslinked PPS reached 85.3 g/mol corresponing to a crosslink density of 0.012 mol/g.
Keywords
poly(phenylene sulfide); photoinitiator; photocrosslinking; gel fraction; pyrolysis; toughness;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 M. J. Ham and Y. H. Kim, Effect of High Temperature Annealing on the Property Changes of Poly(phenylene sulfide) Films, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 47(2), 102(2010).   과학기술학회마을
2 Z. Mei and D. D. L. Chung, Effect of Heating Time below the Melting Temperature on Polyphenylene Sulfide Adhesive Joint Development, International J. of Adhesion and Adhesives, 20(4), 273(2000).   DOI
3 W. Tanthapanichakoona, M. Furuuchia, K. Nittaa, M. Hataa, S. Endohb and Y. Otani, Degradation of Semi-crystalline PPS Bag-filter Materials by NO and $O_2$ at High Temperature, Polymer Degradation and Stability, 91(8), 1637(2006).   DOI
4 J. S. Lee, B. Y. Kim and J. H. Lee, The Relation Among the Linear Energy Transfer and Changes of Polyphenylene Sulfide Surface by Ion Implantation, J. of the Korean Institute of Electronic Material Engineers, 18(5), 407(2005).   과학기술학회마을   DOI
5 N. Anagreh, L. Dorn and C. B. Krause, Lowpressure Plasma Pretretment of Polyphenylene Sulfide (PPS) Surfaces for Adhesive Bonding, Int. J. of Adhesion and Adhesives, 28(1), 16(2007).
6 G. H. Koo and J. Jang, Hydrophilic Modification of Poly(ethylene oxide) by UV Irradiation, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 21(1), 16(2009).   과학기술학회마을   DOI
7 E. M. Kim, and J. Jang, Surface Modification of meta-Aramid Films by UV/ozone Irradiation, Fibers and Polymers, 11, 677(2010).   과학기술학회마을   DOI
8 Y. Dong and J. Jang, The Enhanced Cationic Dyeability of Ultraviolet⁄Ozone-treated meta-Aramid Fabrics, Color. Technol., 127, 173(2011).   DOI
9 D. W. Yun and J. Jang, Surface Modification of Ultra High Molecular Weight Polyethylene Films by UV/ozone Irradiation, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 23, 76(2011).   과학기술학회마을   DOI
10 E. M. Kim, B. G. Min, and J. Jang, Reactive Dyeing of meta-Aramid Fabrics Photografted with Dimethylaminopropyl Methacrylamide, Fibers and Polymers, 12, 580(2011).   과학기술학회마을   DOI   ScienceOn
11 D. W. Yun and J. Jang, Octadecane Fixation via Photocrosslinking of Polyethylene Film, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 22(3), 214(2010).   과학기술학회마을   DOI
12 G. H. Koo and J. Jang, Depth-Gradient and Photoinitiator-Free Photocrosslinking of Poly(ethylene oxide), J. of Applied Polymer Science, 125, 2012. http://dx.doi.org/10.1002/APP.38056
13 G. H. Koo, and J. Jang, Preparation of Melting-Free Poly(lactic acid) by Amorphous and Crystal Crosslinking under UV Irradiation, J. of Applied Polymer Science, 125, 2012. http://dx.doi.org/10.1002/APP.38056
14 A. M. Diez-Pascual and M. Naffakh, Synthesis and Characterization of Nitrated and Aminated Poly(phenylene sulfide) Derivatives for Advanced Applications, Materials Chemistry and Physics, 131, 605(2012).   DOI