• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.34-40
• /
• 2012

Purpose: The study was performed to compare patients with anatomical variations in facial asymmetry with patients in the normal range using cone-beam computed tomography (CBCT) and to take the preoperative condition into consideration in the case of a sagittal split ramus osteotomy (SSRO). Methods: The study was conducted on 46 adult patients composed of 2 subdivided groups, an asymmetry group (n=26) and a symmetry group (n=20). The asymmetry group was divided between patients with hemimandibular hyperplasia (HH, n=8) and hemimandibular elongation (HE, n=18). Using cross-sectional computed tomography images, the thickness of cancelleous bone in the buccal area of the mandible, thickness of buccal cortex in the buccal aspect of the mandible, thickness of cancellous bone in the inferior aspect of the mandible, thickness of buccal cortex in the inferior aspect of the mandible, and cross-sectional surface area of the mandible were measured. Results: In the asymmetry group, the cross-sectional area of the mandible including the inferior alveolar nerve positioned on the affected side was significantly different from the symmetry group. Thickness of cancelleous bone in the buccal aspect of the mandible, thickness of cancelleous bone in the inferior aspect of the mandible, and cross-sectional surface area of the mandible in the affected site of hemimandibular hyperplasia was significantly smaller than in the symmetry group. Conclusion: The inferior alveolar nerve runs lower and in a more buccal direction and shows a smaller cross-sectional surface of the mandible in the hemimandibular hyperplasia patients with asymmetry.

• 대한의용생체공학회:의공학회지
• /
• 제41권6호
• /
• pp.219-227
• /
• 2020

In this study, we tried to quantify the actual cross-sectional area inside the bore when scanning by the MRI system with various bore sizes. To this end, a comparative analysis was conducted by both of blueprint of each MRI equipment and actual measurement in the field. As a result of analysis, ACSA(Actual Cross-Sectional Area) in Ingenia CX, Elition X, uMR 780, Omega, Vida, Lumina, Architect, Premier is recorded as 171230, 232150, 242100, 309332, 230760, 230760, 229380 and 235990 ㎟, respectively ACSA% was 60.6, 60.3, 73.0, 70.0, 60.0, 60.0, 59.6, and 61,3%. In addition, DTB (Distance from Table top to Bore top) recorded 400, 407, 445, 495, 405, 405, 405, 403, and 412 mm. Through this study, it was confirmed that there is a difference between the bore size according to each MRI system and the actual cross-sectional area during MRI scanning. Accordingly, if we consider the internal actual area just not bore size at the clinical site, useful diagnostic images can be obtained in the end with better convenience.

• Journal of Korean Biological Nursing Science
• /
• 제13권2호
• /
• pp.179-184
• /
• 2011

Purpose: The purpose of this study was to examine the effect of short-term undernutrition on muscle weight and Type I and II fiber cross-sectional area of hindlimb muscles in undernourished rats. Methods: Adult male Sprague-Dawley rats were randomly assigned to one of two groups: The undernourished (UN) group (n=9) and the control (C) group (n=9). A control group was allowed to have water and pellet ad libitum for 5 days. Undernutrition was induced by providing 32% of total intake of the control group for 5 days. Body weight of two groups and food intake of the control group were measured every day. At 6 days all rats were anesthetized and soleus, plantaris and gastrocnemius muscles, and liver were dissected. Body weight, food intake, muscle weight, liver weight and cross-sectional area were determined. Results: The UN group at 6 days after undernutrition showed significant decreases, as compared to the control group in body weight, liver weight, muscle weight of soleus, plantaris, and gastrocnemius, and Type I fiber cross-sectional area of soleus and gastrocnemius muscles and Type II fiber cross-sectional area of plantaris and gastrocnemius muscles. Conclusion: Hindlimb muscle atrophy occurs from the short-term undernutrition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.89-96
• /
• 2023

본 연구에서는 강봉댐퍼의 변위의존성 평가, 강도 및 에너지소산능력을 평가하였다. 실험 변수는 단면형상 및 형상비이며, 총 6개의 실험체를 제작하였다. 실험 결과, 설계기준에서 제시한 변위 의존성 조건을 모든 실험체가 만족하는 것으로 평가되었다. 그리고 단면형상에 따른 강도 영향은 미비하였다. 결과적으로, 형상비 13.7의 강도 및 에너지소산능력이 우수한 것으로 평가되었다.

• 아태비즈니스연구
• /
• 제11권4호
• /
• pp.243-254
• /
• 2020

Purpose - This paper explores whether overnight returns measured from the last closing price to today's opening price explain the cross-section of stock returns. Design/methodology/approach - This study is conducted using the Korean stock market data from 1998 to 2018, obtained from DataGuide database. The analysis begins with portfolio-level tests, followed by firm-level cross-sectional regressions. Findings - First, when decile portfolios sorted on the daily average of overnight returns in the previous months, the highest decile portfolio exhibits a significant negative risk-adjusted return. This suggests that stocks with higher average overnight returns are temporarily overvalued due to buying pressure from investors. Second, at least 6 months of persistence exists in average overnight returns, which is in line with the results reported by Barber, Odean and Zhu (2009) that investor sentiment persists over several weeks. Finally, Fama-MacBeth cross-sectional regression of expected returns after controlling for a variety of firm characteristic variables such as firm size, book-to-market ratio, market beta, momentum, liquidity, short-term reversal, the slope coefficient for overnight returns remains negative and statistically significant. Research implications or Originality - Overall, the evidence consistently suggests that overnight return is considered as a new priced factor in the cross-section of expected returns. The findings of this paper not only adds to finance literature, but also could be useful to practitioners in making stock investment decision.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2277-2288
• /
• 1996

This study was performed to analyze the cooling effect of heated ribs which are frequently used for cooling of electronic parts, using the numerical method. To prevent the excessive pressure drop due to turbulence promoters for the enhancement of heat transfer rate especially, the effect of the angle of turbulence promoter was investigated by the numerical analysis. Heat transfer rate with turbulence promoters with rectangular cross-section increased by 13% in average, but the coefficient of pressure drop increased by 1.68 times than that without them. In the present study, triangular cross-sectional shape turbulence promoters were suggested and numerically tested. Pressure drop of turbulence promoter with the 30 degree triangular cross-sectional shape decreased by 30% from that of rectangular cross-section promoters while heat transfer rate was almost the same. While with 4 turbulence promoters, the heat transfer rate increased by 21%, the pressure drop increased 4 times. It means that the higher capacity of cooling fan should be needed. With the triangular cross-sectional shape, the size of vortex region at the rear of promoters became considerably smaller, so pressure drop became smaller. The effect of the change of cross-sectional shape was not found in the flow pattern near the ribs, so that heat transfer characteristics in the ribs were not changed.

• Journal of Chest Surgery
• /
• 제32권5호
• /
• pp.442-447
• /
• 1999

서론: 성장기에서 기관의 성장양상에 관한 이해는 수많은 기관질병의 관리나 선천성 기관협착증에서 기관 성형술 등에서 매우 중요한 지표가 된다. 그러나 이에 관한 국내의 연구례가 거의없는 실정이다. 본 연구는 한국인 소아에서 기관의 내경과 단면적을 후향적으로 분석하여 기관질환의 치료에 기초자료를 제공하고자 한다. 대상 및 방법: 1996년 5월부터 1998년 8월까지 흉부전산화 단층촬영을 시행한 0세부터 20세까지 106명의 환자를 대상으로 하였는데 기관의 내경이나 단면적에 영향을 줄 수 있는 기관질환, 과거에 개흉술을 받은 경우, 종격동 종양, 폐쇄성 폐질환이 있는 경우는 본 연구에서 제외시켰다. 남자가 69명, 여자가 37명이었으며 기관의 종단내경과 횡단내경은 흉부유입부와 대동맥궁 부위에서 각각 측정하였다. 기관의 형태는 각 부위의 단면에서 원형, 타원형, 말발굽형으로 구분하였으며 단면적은 A = 1/4$\pi$ab (A: 단면적, $\pi$: 3.14, a: 종단내경, b: 횡단내경)의 공식으로 계산하여 각 부위의 내경과 연령 및 성별에 따른 단면적을 비교 분석하였다. 통계처리에서 p값이 0.05이하일 때 통계적 의미가 있는 것으로 간주하였다. 결과: 5세이하에서는 level I과 II 모두에서 기관의 형태가 원형을 이루고 있었으며 두 부위간의 단면적의 차이는 없었다. 성장함에 따라 level I의 형태는 타원형으로 변해가는 반면 level II에서는 그대로 원형을 유지하고 있었으며 level I의 단면적이 level II 보다 크다(p=0.020). 기관의 내경과 단면적은 성장함에 따라 직선관계로 증가한다는 것이 확인되었고(r>0.9), 5세이하의 소아에서는 여자가 남자보다 기관의 단면적이 크고 (p=0.020) 15세가 넘으면 반대로 남자가 더 크다 (p=0.002). 결론: 이상의 결과에서 흉부전산화 단층촬영은 기관의 내경과 단면적을 측정하는데 있어 안전하고 확실한 방법이며 성장기의 한국인에서 기관의 내경과 단면적에 대한 지표가 되고자 한다.

• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.101-105
• /
• 2016

Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.189-194
• /
• 2015

Backside Ar ion milling technique for the preparation of cross-sectional transmission electron microscopy (TEM) specimens, and backside-ion milling combined with focused ion beam (FIB) operation for electron holography were introduced in this paper. The backside Ar ion milling technique offers advantages in preparing cross-sectional specimens having thin, smooth and uniform surfaces with low surface damages. The back-side ion milling combined with the FIB technique could be used to observe the two-dimensional p-n junction profiles in semiconductors with the sample quality sufficient for an electron holography study. These techniques have useful applications for accurate TEM analysis of the microstructure of materials or electronic devices such as arrayed hole patterns, three-dimensional integrated circuits, and also relatively thick layers (> $1{\mu}m$).

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1056-1062
• /
• 2002

This paper reports the characteristics of the three dimensional turbulent flow in the 180 degree bends with decreasing cross-sectional area by numerical method. Calculated pressure and velocity, Reynolds stress distributions are compared to the experimental data. Turbulence model employed are low Reynolds number k-epsilon model and algebraic stress model. The results show that the main vortex generated from the inlet part of the bend maintained to outlet of the bend because of the contraction of cross-sectional area. The rate of increase of turbulent kinetic energy through the bend are lower than that of mean flow. Secondary flow strength of the flow is lower about 60% than that of square duct flow.