• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.49-52
• /
• 2007

Recently, as architectural concrete structures become high-rise and megastructured, concrete become high-strengthened and, by ensuring products of more stability, air compression and rationalization of construction are required. In general, product management test of precast concrete member, specimen for management cured in the same condition with precast concrete member is substitutively used for strength test. However, large cross-sectional precast concrete members such as columns show large temperature increase in manufacturing process not only by external heating but also by concrete itself's hydration heating. Therefore, it is expected that specimen for management to predict strength and compression strength of precast concrete member shows different temperature history and strength characteristics. Concerning this, in order to suggest temperature history and strength characteristics of high strength mass concrete suitable for precast concrete application, this study comprises the inclusive investigations on the relations between management specimen with similar temperature history and core strength, and the strength characteristics per member cross-section dimensional value and per water-bonding material ratio value.

• 약학회지
• /
• 제59권2호
• /
• pp.66-69
• /
• 2015

A concise synthesis of flurbiprofen, a member of the non-steroidal anti-inflammatory 2-arylpropionic acids, has been accomplished. The key feature of this synthesis involves successive palladium-catalyzed cross coupling reactions. In particular, a 2-arylacylate intermediate, which easily converted to the key 2-arylpropionic acid scaffold, was afforded by a versatile palladium-catalyzed cross coupling reaction between diazopropanate and bisphenylboronic acid. This synthetic procedure would facilitate synthesis of the flurbiprofen and anti-inflammatory 2-arylpropionic acid derivatives.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.143-155
• /
• 2001

Generally, truss design has been determined by the designer's experience and intuition. But if we perform the most economical structural design we must consider not only cross-sections of members but also configurations(howe, warren and pratt types etc.) of single truss as the number of panel and truss height. The purpose of this study is to develope automated optimum design techniques for steel truss structures considering cross-sections of members and shape of trusses simultaneously. As the results, it could be possible to find easily the optimum solutions subject to design conditions at the preliminary structural design stage of the steel truss structures. In this study, the objective function is expressed as the whole member weight of trusses, and the applied constraints are as stresses, slenderness ratio, local buckling, deflection, member cross-sectional dimensions and truss height etc. The automated optimum design algorithm of this study is divided into three-level procedures. The first level on member cross-sectional optimization is performed by the sequential unconstrained minimization technique(SUMT) using dynamic programming method. And the second level about truss height optimization is applied for obtaining the optimum truss height by three-equal interval search method. The last level of optimization is applied for obtaining the optimum panel number of truss by integer programming method. The algorithm of multi-level optimization programming technique proposed in this study is more helpful for the economical design of plane trusses as well as space trusses.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.625-638
• /
• 2017

This paper presents a novel approach that describes the first-order (linear elastic) partial interaction analysis of members formed by multi-components based on the Generalised Beam Theory (GBT). The novelty relies on its ability to accurately model the partial interaction between the different components forming the cross-section in both longitudinal and transverse directions as well as to consider the cross-sectional deformability. The GBT deformations modes, that consist of the conventional, extensional and shear modes, are determined from the dynamic analyses of the cross-section represented by a planar frame. The partial interaction is specified at each connection interface between two adjacent elements by means of a shear deformable spring distributed along the length of the member. The ease of use of the model is outlined by an application performed on a multi-component member subjected to an eccentric load. The values calculated with an ABAQUS finite element model are used to validate the proposed method. The results of the numerical applications outline the influence of specifying different rigidities for the interface shear connection and in using different order of polynomials for the shape functions specified in the finite element cross-section analysis.

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.215-222
• /
• 2004

재분배기법을 이용한 변위조절설계법이 고층건물의 실용적인 변위제어 기법으로 제안되고 있다. 현재까지 대부분의 재분배기법을 이용한 변위조절설계법은 일률적으로 단면적을 설계변수로 사용하고 있으나, 부재 특성에 따라 지배적인 부재력이 다르므로 부재적 특성을 고려하여 설계변수를 선택할 필요가 있다. 그러므로 본 연구에서는 부재별로 부재력 특성을 고려한 설계변수를 사용한 변위조절설계법을 제안하고 이를 20층 강접골조-전단벽 구조물의 변위조절설계에 적용하여 기존의 단면적을 설계변수로 사용한 변위조절설계법과 비교 평가하였다. 적용 결과, 부재 특성을 고려한 변위조설설계법이 부재별로 지배적인 부재력에 해당하는 부재 단면성능을 설계변수로하여 부재별 변위기여도를 직접 조절하므로 물량 및 변위 예측의 정확도 측면에서 비슷하거나 더 우수함을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.249-259
• /
• 2011

본 연구에서는 비틀림 하중을 받는 U형 강박스 거더의 뒤틀림 거동을 해석적으로 분석하여 거더 내부에 설치되는 수직브레이싱의 각 부재에 발생하는 부재력을 산정하는 수식이 개발되었다. 편심하중 또는 거더의 곡률에 의해 발생하는 비틀림하중을 박스단면내 상대적인 변형과는 무관한 순수 비틀림 성분력과 박스 단면내 뒤틀림을 유발하는 뒤틀림 성분력으로 분해하여 뒤틀림 성분력과 이에 저항하는 내부 수직브레이싱의 상호작용 효과를 분석함으로써 각 부재에 발생하는 부재력을 비틀림하중의 함수로 도출하였다. 제안식의 타당성을 검증하기 위하여 편심하중을 받는 단경간 직선거더 및 전경간 일정한 곡률을 가지는 3경간 거더 예제를 선정하여 3차원 유한요소 모델링을 수행하고 해석을 통해 얻은 내부 수직브레이싱의 각 부재력을 제안식으로 산정된 값과 비교 분석하였다. 해석 및 제안식으로 결정된 각각의 부재력은 높은 수준으로 일치함을 보였다.

• 보건교육건강증진학회지
• /
• 제33권2호
• /
• pp.47-55
• /
• 2016

Objectives: We investigated whether the rate of depressive symptom is higher among family members of asthmatic patient compared to people who had no asthmatic family member. Methods: This study used data from the fourth and fifth Korea National Health and Nutrition Examination Survey (2007-2012). In this cross-sectional study, 15,987 men (mean age 46.4) and 20,906 women (mean age 47.4) were included. To compare the rate of depressive symptoms in individuals who had a family member with asthma and those who did not have, we analyzed data using survey logistic regression. Results: Diagnosed depression was reported by 3.0% of the study population, by 4.2% of asthmatic patient's family member, and by 3.0% of individuals who did not have a family member with asthma. Family members of asthmatic patient increased odds of diagnosed depression compared with those who did not had an asthmatic family member (odds ratio = 1.56, p = 0.008). Conclusions: To prevent depression among family members of asthmatic patient, health education for entire family of asthmatic patient need to be considered. Also, government and policy makers should give more attention to caregivers who had a family member with asthma.

• 한국터널지하공간학회 논문집
• /
• 제17권1호
• /
• pp.49-63
• /
• 2015

본 논문에서는 가상 해저터널의 세그먼트 라이닝의 부재력 평가하여 수심별 세그먼트 최적 두께 산정 및 하중식에 따른 부재력 변화에 관한 내용을 다루었다. 가상 해저터널의 세그먼트 부재력을 평가하기 위해 먼저 다양한 설계 조건을 도출하고 이에 대해 2-Ring Beam 모델을 이용한 구조해석을 수행하여 부재력을 산출하였다. 산출한 부재력을 이용하여 예비 철근 배근을 통해 단면검토를 수행하여 각각의 지층별로 철근 배근을 조절하여 최적 두께를 산정하였다. 검토 결과를 토대로 시공조건에 따른 부재력 변화 경향을 검토하였으며 아울러 다양한 시공조건에 따른 최적 라이닝 단면을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.46_47
• /
• 2009

The West African Power Pool is currently developing the regional electricity market for its member states. As the basic design for the cross-border power trading system for the West African Power Pool, the step-by-step evolution, the Baseline System and the Fullscale System, is estimated. Along with the interconnection project between member countries, the various functions from the data acquisition and processing by the Baseline System to the interchange trading by the Fullscale System will be implemented gradually.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.214-218
• /
• 2011

In order to survive in turbulent and competitive markets, automotive part manufacturers try efforts to develop new manufacturing technologies for ultra-lightweight, high-intensity and environmentally-friendly parts. Most of front lower arm is manufactured by welding process between upper- and lower panel which are produced by press stamping process. Because lower arm mounted on the cross member parts is one of the important complementary parts. So, to improve safety and lightweight of these parts, hybrid technologies are used in this paper. As hybrid technologies are applied to be front sub-frame, rear cross member and other chassis parts as well as front lower arm, the 20% lightweight has been achieved compared with existing steel parts.