• 한국해양공학회지
• /
• 제18권5호
• /
• pp.43-49
• /
• 2004

The lightness of components required in the automobile and machine industry necessitates the use of high strength components. In particular, the fatigue failure phenomena, which occurs when using metal, increases the danger to human life and property. Therefore, antifatigue failure technology is an integral part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel, while improving the fatigue strength on surface. Therefore, in this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in a stress ratio(R=0.1, R=0.3, R=0.6) was investigated, giving consideration to fracture mechanics. By using the methods mentioned above, following conclusions are drawn: (1) The fatigue crack growth rate(da/dN) of the shot-peening material was lower than that of the un-peening material and in stage I, ΔKth, the threshold stress intensity factor of the shot-peen processed material is high in critical parts, unlike the un-peening material. Also m, fatigue crack growth exponent and number of cycle of the shot-peening material, was higher than that of the un-peening material, as concluded from effect of da/dN. (2) Fatigue life shows more improvement in the shot-peening material than in the un-peening material, and the compressive residual stress of surface on the shot-peen processed operate resistance of fatigue crack propagation.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.167-182
• /
• 2018

The modeling of loss of bond between reinforcing bars (rebars) and concrete due to corrosion is useful in studying the behavior and prediction of residual load bearing capacity of corroded reinforced concrete (RC) members. In the present work, first the possibility of using different methods to simulate the rebars-concrete bonding, which is used in three-dimensional (3D) finite element (FE) modeling of corroded RC beams, was explored. The cohesive surface interaction method was found to be most suitable for simulating the bond between rebars and concrete. Secondly, using the cohesive surface interaction approach, the 3D FE modeling of the behavior of non-corroded and corroded RC beams was carried out in an ABAQUS environment. Experimental data, reported in literature, were used to validate the models. Then using the developed models, a parametric study was conducted to examine the effects of some parameters, such as degree and location of the corrosion, on the behavior and residual capacity of the corroded beams. The results obtained from the parametric analysis using the developed model showed that corrosion in top compression rebars has very small effect on the flexural behaviors of beams with small flexural reinforcement ratio that is less than the maximum ratio specified in ACI-318-14 (singly RC beam). In addition, the reduction of steel yield strength in tension reinforcement due to corrosion is the main source of reducing the load bearing capacity of corroded RC beams. The most critical corrosion-induced damage is the complete loss of bond between rebars and the concrete as it causes sudden failure and the beam acts as un-reinforced beam.

• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.35-45
• /
• 2014

사면의 안정성을 위한 한계평형해석은 간편함과 적용성 때문에 가장 널리 적용되고 있다. 이러한 간편한 방법으로 균질하지 않고 방향성 있는 지층 같은 다양한 지형조건을 해석하기에는 신뢰성과 설득력 있는 결과를 주기에 한계가 있다. 또한 지반굴착과 성토지반 같은 토사사면의 초기 응력상태나 응력경로와 같은 지반의 응력변화에 대해서 고려하지 못한다. 반면, 한계평형해석과는 다르게, 유한요소법에 의한 변형과 응력분포 해석은 시간에 따른 복잡한 하중단계와 탄성영역외의 범위를 다룰 수 있다. 본 연구에서는 불포화 토사사면에서 발생하는 얕은 파괴의 안전율 계산과 임계단면을 결정하는 방법을 제안한다. 유한요소해석은 유효응력 거동을 근간으로 각 요소들의 가우스 포인트에서 응력들이 계산되고 안전율이 가장 약한 지점들을 찾아 비선형 임계단면이 결정된다. 이러한 사면안정해석은 강우침투에 의해 변형되는 지반의 사면 표층파괴에 적합하게 계산된다. 침투에 의한 지반의 단위중량의 변화는 사면의 연직 및 수평변위에 영향을 주며, Drucker-Prager 파괴기준은 수리학-역학적인 연계된 불포화토의 거동 해석과 응력-변형률 관계를 위해 적용된다.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.79-86
• /
• 2014

이 연구는 표면매입 보강된 FRP 판과 콘크리트사이의 응력전달기구를 이론적으로 연구한 것으로서 이선형 부착모델을 이용하여 부착거동을 묘사하고 이를 실험 결과와 비교하여 신뢰성있는 해석방법을 제시하였다. 연구로부터, 표면매입된 FRP 판과 콘크리트사이의 계면특성을 고려한 미분방정식에 이선형 부착-미끄러짐 관계곡선을 사용하여 해석할 경우, 모델의 임계값인 최대전단강도와 미끄러짐 변위, 그리고 박락에 의한 연화거동이 시작될 때의 변위값 선정과정이 제시되었다. 또한 제안된 모델을 사용하여 부착길이가 다르게 보강된 표면매입 FRP 판의 미끄러짐 거동을 해석한 결과 실제 거동을 매우 근사하게 묘사할 수 있는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.76-81
• /
• 2000

Analysis on failure of the panel glass under mechanical shock is the main topic of this study. Since the glass for the LCD panel is thin, it needs to be designed to have enough toughness against mechanical shock. In this paper, a process of estimating fracture of the panel glass is proposed to guarantee reliability of the product. The fracture toughness of the panel glass is used as a criterion of the fracture based on an experimental approach. The stress intensity factor was calculated considering a model with the largest initial crack size on a cut surface and with the boundary force obtained from a dynamic finite element analysis. Critical surface roughness on the cut surface of a typical glass panel, to prevent fracture in case of bending mode, is obtained.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제4권1호
• /
• pp.44-50
• /
• 2001

Existing surface defects in structural members often act as sites of fatigue crack initiation, and if undetected, these cracks may grow through the thickness of the member, leading to catastrophic failure of the structure. Thus, in-service monitoring of fatigue cracks through reliable and effective nondestructive techniques is an important ingredient in the leak-before-break (LBB) design and safe operation of defects critical structures. An advanced, waveform-based, acoustic emission (AE) technique has been used in this paper to study the characteristics of the signals emanating from the initiation, growth and through-the -thickness penetration of surface fatigue crack in a 6061 aluminum plate. The goal of this experimental study is to determine whether the evolution of the fatigue crocks could be identified from the properties of the waveforms produced during the tests. The AE waveform signals detected at different stages of crack growth was found to have different temporal and spectral characteristics. The data analysis technique presented here can be applied to real-time monitoring of the initiation and propagation of fatigue cracks in structural components.

• Composites Research
• /
• 제13권6호
• /
• pp.55-62
• /
• 2000

실제 구동 시 가장 취약한 부분인 탄소/탄소 브레이크 로터 디스크에 대해 강도실험을 수행하였다. 이 실험을 위해 탄소/탄소 브레이크 디스크 정적 강도 실험을 할 수 있는 시험 치구를 상용 유한요소 프로그램인 NISA를 이용하여 설계 제작하였다. 실제 동역학적인 구동 상태를 정역학적으로 묘사하기 위해 브레이크 디스크의 마찰면을 고정시킨 후 실제의 하중방향과 동일한 방향으로 하중을 로터 슬롯에 가하여 브레이크 디스크의 강도를 측정하였다. 또한 파손시 나타나는 파손 메카니즘은 키와 로터슬롯의 접촉부위에서부터 시작되는 모재 파손에 이은 층간 분리가 나타났고, 하중이 더욱 증가하자 로터슬롯의 노치 부분에서 최종파손으로 이어졌다.

• 한국전산구조공학회논문집
• /
• 제20권3호
• /
• pp.273-279
• /
• 2007

복잡한 구조물의 유한요소해석 응답값으로부터 계산된 요소신뢰성 지수와 파괴확률은 음함수의 미분 및 극히 작은 파괴확률의 계산상 1계2차 모멘트법 (FOSM)과 몬테카를로 시뮬레이션(Monte-Carlo Simulation)의 적용이 어려우므로, 선택된 확률변수만의 함수인 한계상태방정식을 음함수로 구성하는 응답면기법을 적용하여, 기본설계단계의 아치교량의 설계값으로 구성된 확률변수를 고려하여 교량시스템의 완성단계에 대한 위험성을 해석하였다. 체계신뢰성 해석에서는 모든 붕괴모드의 발생경로와 단면에 대한 해석에 많은 시간이 소요되어 유한요소 구조해석 결과와 기존의 아치교 사고사례 등을 통해서 밝혀진 중요한 위험경로 및 위험단면의 파괴를 일으키는 사건에 대하여만 고려하였다. 교량시스템의 체계신뢰성을 평가하여 상관관계의 변동에 따른 시스템붕괴에 대한 발생확률의 상하한계를 결정하였다. 시스템의 요소간 저항연결구조는 요소파괴의 순서와 전체강성의 감소정도에 따라서 결정하였다. 체계신뢰성에서 검토되지 않는 다른 요소간의 상관관계를 검토하기 위해서 가정된 붕괴순서와 다른 거동을 보일 경우에 대해서는 통계적으로 독립된 요소들의 파괴와 그 모든 붕괴모드 조합경우에 대해서 검토하였다. 붕괴모드조합의 검토 결과 거더와의 파괴조합과 아치리브와의 파괴조합에서 체계신뢰성보다 위험한 상한계 시스템 파괴확률과 안전한 하한계 파괴확률이 발견되었다.

• Steel and Composite Structures
• /
• 제37권3호
• /
• pp.353-369
• /
• 2020

Eight cold-formed thin-walled steel beams were performed to investigate the effect of corrosion damage on the flexural behavior of steel beams. The relationships between failure modes or load-displacement curves and corrosion degree of steel beams were investigated. A series of parametric analysis with more than forty finite element models were also performed with different corrosion degrees, types and locations. The results showed that the reduction of cross-section thickness as well as corrosion pits on the surface would lead to a decline in the stiffness and flexural capacity of steel beams, and gradually intensified with the corrosion degree. The yield load, ultimate load and critical buckling load of the corroded specimen IV-B46-4 decreased by 22.2%, 26% and 45%, respectively. The failure modes of steel beams changed from strength failure to stability failure or brittle fracture with the corrosion degree increasing. In addition, thickness damage and corrosion pits at different locations caused the degradation of flexural capacity, the worst of which was the thickness damage of compression zone. Finally, the method for calculating flexural capacity of corroded cold-formed thin-walled steel beams was also proposed based on experimental investigation and numerical analysis results.

• Tribology and Lubricants
• /
• 제22권5호
• /
• pp.243-251
• /
• 2006

Molecular dynamics simulations of nanoimprint lithography NIL) are performed in order to investigate effects of process parameters, such as stamp shape, imprinting temperature and adhesive energy, on nanoimprint lithography process and pattern transfer. The simulation model consists of an amorphous $SiO_{2}$ stamp with line pattern, an amorphous poly-(methylmethacrylate) (PMMA) film and an Si substrate under periodic boundary condition in horizontal direction to represent a real NIL process imprinting long line patterns. The pattern transfer behavior and its related phenomena are investigated by analyzing polymer deformation characteristics, stress distribution and imprinting force. In addition, their dependency on the process parameters are also discussed by varying stamp pattern shapes, adhesive energy between stamp and polymer film, and imprinting temperature. Simulation results indicate that triangular pattern has advantages of low imprinting force, small elastic recovery after separation, and low pattern failure. Adhesive energy between surface is found to be critical to successful pattern transfer without pattern failure. Finally, high imprinting temperature above glass transition temperature reduces the imprinting force.