• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.193-195
• /
• 2003

Micro-structure and shear properties with reflow conditions, reflow temperature and time, for In-48Sn solder on BGA package were examined at the temperature between 140 and 170$^{\circ}C$ for 10 to 3600sec. With increasing reflow temperature and time, the thickness of intermetallic compound formed between solder and pad increased. Shear test indicated shear force increased in the range to a critical value of reflow time, and decreased over a critical reflow time. With increasing reflow temperature and time, the crater occurred on fracture surface because of a increase of crater by voids and IMC particles precipitated in solder.

• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.39-45
• /
• 2000

The volume and depth of the craters produced on silicon samples during high power laser ablation show a strong nonlinear change as the laser irradiance increases across a threshold value, approximately 2.2$\times$10$\^$10/ W/㎠. Time-resolved shadowgraph images of the ablation plume reveal the ejection of large particulates from the sample for laser irradiance above the threshold, with a time delay of about 300-400 ㎱. The numerically estimated thickness of the superheated liquid layer, considering the transformation of liquid metal into liquid dielectric near the critical state, agrees with the measured agrees with crater depths. It is suggested that a phase explosion of the deep superheated liquid layer near the critical state is responsible for the measured sudden increase of crater volume and the ejection of large particulates.

• 약학회지
• /
• 제4권1호
• /
• pp.21-34
• /
• 1959

(1) Plants in the crater of Halla-San (Mt. Halla), a conical volcano that originated in the Tertiary period, were studied on three different occasions; July 1937, July 1955, and August 1957, and noted 52 familites, 149 species. In the latest study undergone in 1957, the authors collected 108 species. Notable species among them are Geranium Shikokianum Matsum which has not been reported in Korea, Clematis Chiisanensis Nakai, Lactuca Chelidonifolia Makino, and Platanthera Maximowiczana Schelchter which have not been reported in Jeu-Do(Island) so far. (2) Plants in To-Do(Island), territorial island of Jeju-do, were also studied. The authors noted Canavalia lineata D.C.non-reported Species in Korea, usually distributed along Southern Honshu, Shikoku, and Kyushu of Japna, Ryukyu and Taiwan. The overfall flora of the island is composed of 30 families, 44 Species; 5 Species of wood plants and 39 species of herbs, and is mostly of littoral plants.

• 대한건축학회논문집:계획계
• /
• 제35권2호
• /
• pp.83-92
• /
• 2019

This study set out to analyze James Turrell's Skyspace works by applying the object relations theory, compare them with several modern architectural works with a sky window based on the analysis results, and check common and differentiating features between them. The findings were as follows: first, Turrell's Skyspace works shed new light on the images of the sky by projecting inner light to the outside; second, sky windows in architecture make the self-representation of inner space clear through the introjection of light; third, 'Hill of the Buddha' reflects the most general aspect of the object relations theory as the nature of projection found in Turrell's Skyspace is added to it; and finally, Turrell installed event-like spaces and steps in 'Roden Crater' to apply the introjection of others that was deficient in Skyspace.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.86-97
• /
• 1994

An experimental investigation is reported on the wear mechanism of CBN cutting tools. The cutting experiments were conducted on a lathe equipped with a tool dynamometer for cutting force measurement. The investigation of wear mechanism was executed by observing the worn tools using tool microscope and scanning electron microscope. Results indicate that the flank wear occurs dominantly by abrasive wear mode and the crater wear by adhesive wear mode. The results also indicate that the width of flank wear is closely related with the passive component of cutting force.

• Ocean and Polar Research
• /
• 제24권4호
• /
• pp.491-500
• /
• 2002

Magnetic anomalies in the Dokdo and it's surroundings were investigated with respect to structure and origin of the Dokdo and surrounding seamounts. After normal and diurnal correction of measured magnetic data, crossover correction was applied to reduce errors between sets of magnetic anomalies. The errors from crossover operation result in decrease of about 51%, from 62.2 nT to 30.1 nT in standard deviation. Reduction-to-the-pole, second vertical derivative and analytic signal processing were applied to explore magnetic anomaly signatures in detail. Magnetic anomalies are most complicated in the 1st-Dok seamount, show SWW-NEE linear pattern in the 2nd-Dok seamount and lower to the 3rd-Dok seamount. Different magnetic anomaly patterns in three seamounts imply that three volcanic seamounts were formed at different times and are composed of rocks that were produced in different conditions. It seems that the 3rd-Dok seamount was first to form and followed by the 1st-Dok seamount. The complicated magnetic and second vertical derivative anomaly patterns in the 1st-Dok seamount may be due to subsidiary cones around crater or the presence of intruded magma bodies below sea surface and the Dokdo is probably a marginal subsidiary part of crater.

• 암석학회지
• /
• 제12권4호
• /
• pp.184-195
• /
• 2003

제주도를 세계자연유산으로 유네스코에 등록하는데 유리한 점을 찾기 위하여 이와 유사한 하와이 섬을 답사하였다. 하와이 섬은 코할라, 마우나케아, 후알랄라이, 마우나로아, 킬라우에아 등의 5개 화산으로 구성된다. 이들은 모두 해저에서 솟은 거대한 순상화산이며 이중에서 마지막 두 화산은 활화산 연구에 자연실험실을 제공한다. 마우나로아 화산은 세계에서 가장 큰 화산이며 지금은 잠시 중지하였지만 남서 및 북동 열곡대를 따라 주로 분출하였고 중앙부에 모쿠아웨오웨오 칼데라가 형성되어 있고 중위부에 세계 최장의 용암동굴이 형성되어 있다. 킬라우에아 화산도 역시 중앙부에 킬라우에아 칼데라가 형성되어 있고 여기서부터 남서쪽과 동쪽으로 열곡대가 형성되어 있으며 이 곳을 따라 분출이 진행되고 있다. 특히 동부 열곡대의 마우나울루 분화구에서 1969∼1974년에 분출되어 마우나울루 용암류역을 형성하였으며, 푸우오오 분화구에서 1983∼1986년에 아아 용암류를, 1986∼1990년에 쿠파이아나하 분화구와, 1991년∼현재까지 푸우오오 분화구에서 퍼호이호이 용암류를 분출되어 푸우오오 및 쿠파이아나하 용암류역을 형성하고 있다.

• 한국건축시공학회지
• /
• 제12권4호
• /
• pp.377-385
• /
• 2012

In this study, the Impact resistance of steel fiber and organic fiber reinforced concrete and mortar was evaluated and the improvement in toughness resulting from an increase in compressive strength and mixing fiber for impact resistance on performance was examined. The types of fiber were steel fiber, PP and PVA, and these were mixed in at 0.1, 0.5 and 1.0 vol.%, respectively. Impact resistance is evaluated with an apparatus for testing impact resistance performance by high-speed projectile crash by gas-pressure. For the experimental conditions, Specimen size was $100{\times}100{\times}20$, 30mm ($width{\times}height{\times}thickness$). Projectile diameter was 7 and 10 mm and impact speed is 350m/s. After impact test, destruction grade, penetration depth, spalling thickness and crater area were evaluated. Through this evaluation, it was found that as compressive strength is increased, penetration is suppressed. In addition, as the mixing ratio of fiber is increased, the spalling thickness and crater area are suppressed. Organic fibers have lower density than the steel fiber, and population number per unit area is bigger. As a result, the improvement of impact resistance is more significant thanks to dispersion and degraded attachment performance.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.72-78
• /
• 2009

전기전도성 이방성 복합재료의 방전가공에 대하여 비정상상태 수식모델을 세우고 갤러킨의 유한요소법으로 해를 구하였다. 피삭재의 온도 분포와 분화구의 모양 및 공작물 제거 속도를 공정 매개변수에 관하여 구득하였다. 계산의 정확도와 효율을 위하여 앞선 연구에서 최적치로 선정된 $12{\times}12$ 요소의 비규칙 체눈을 사용하였다. 알루미나/티타늄 카바이드 복합재료의 물성을 재료의 물성으로 선정하였고 51.4 V의 전압과 7 A의 전류를 갖는 전력을 적용하였으며 제거 효율을 10%로 전열 이방성 계수를 2와 3으로 가정하였다. 불꽃이 일어나면서 피삭재는 즉시 녹기 시작하였고 열적 손상 영역이 형성되었다. 또한 시간이 흘러감에 따라서 분화구의 경계가 이동하는 것이 확인되었다. 반경 방향과 축 방향의 열전도도가 독립적으로 커지면 온도분포와 분화구의 모양이 각각 반경 방향과 축 방향으로 이동하였다. 공작물 제거 속도는 축 방향의 열전도도보다 반경 방향의 열전도도가 증가할 때 더욱 커지는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권1호
• /
• pp.37-45
• /
• 2013

본 연구에서는 다양한 RC 슬래브의 접촉 발파 실험을 수행하여 내폭 성능을 평가하였다. RC 슬래브의 내폭 성능 향상을 위해 섬유 보강과 외부 CFRP 시트 보강을 도입하였다. 폭발하중 실험은 $2,000{\times}1,000{\times}100mm$ RC 슬래브를 제작하였고, 일반 콘크리트와 강섬유 보강 콘크리트, 하이브리드 PVA 섬유 보강 시멘트 복합체, 초고성능 콘크리트를 적용하였다. 접촉 발파로 생긴 RC 슬래브의 손상 정도를 크레틀, 스폴과 브리치의 직경과 깊이로 평가하였다. 실험 결과를 LS-DYNA 유한요소해석 프로그램과 Morishita 등의 예측식으로 검증하고 비교분석하였다. 분석 결과, LS-DYNA 프로그램을 이용하여 크레틀, 스폴, 브리치의 직경 및 깊이에 대한 개략적인 예측이 가능하며, 폭발하중 하에서 손상부의 거시적 거동을 모사함으로써 부재의 파괴 이력을 나타낼 수 있었다. 국부 손상에 대한 세가지 예측식이 소개되어 있으나 경험식으로써의 한계가 존재하며, 이에 대한 추가 연구가 필요하다고 판단된다.