DOI QR코드

DOI QR Code

Evaluating Local Damages and Blast Resistance of RC Slabs Subjected to Contact Detonation

접촉 폭발 하중을 받는 RC 슬래브의 국부 손상 및 내폭 성능 평가

  • 리령 (고려대학교 건축사회환경공학부) ;
  • 이진영 (고려대학교 건축사회환경공학부) ;
  • 민경환 (고려대학교 방재과학기술 연구소) ;
  • 윤영수 (고려대학교 건축사회환경공학부)
  • Received : 2012.06.29
  • Accepted : 2012.10.22
  • Published : 2013.01.30

Abstract

In this study, the resistance of various reinforced concrete (RC) slabs subjected to contact detonation was assessed. In order to enhance the blast resistance, fibers and external FRP sheets were reinforced to RC slabs. In the experiment, the $2,000{\times}1,000{\times}100mm$ sized RC slabs were fabricated using normal concrete (NC), steel fiber reinforced concrete (SFRC), polyvinyl alcohol fiber reinforced cementitious composite (PVA FRCC), and ultra-high performance cementitious composites (UHPCC). The damage levels of RC slabs subjected to contact detonation were evaluated by measuring the diameter and depth of crater, spall and breach. The experimental results were compared to the analyzed data using LS-DYNA program and three different prediction equations. The diameter and depth of crater, spall and breach were able to be predicted using LS-DYNA program approximately. The damage process of RC slabs under blast load was also well expressed. Three prediction equations suggested by other researchers had limitations to apply in terms of empirical approaches, therefore it needs further research to set more analytical considerations.

본 연구에서는 다양한 RC 슬래브의 접촉 발파 실험을 수행하여 내폭 성능을 평가하였다. RC 슬래브의 내폭 성능 향상을 위해 섬유 보강과 외부 CFRP 시트 보강을 도입하였다. 폭발하중 실험은 $2,000{\times}1,000{\times}100mm$ RC 슬래브를 제작하였고, 일반 콘크리트와 강섬유 보강 콘크리트, 하이브리드 PVA 섬유 보강 시멘트 복합체, 초고성능 콘크리트를 적용하였다. 접촉 발파로 생긴 RC 슬래브의 손상 정도를 크레틀, 스폴과 브리치의 직경과 깊이로 평가하였다. 실험 결과를 LS-DYNA 유한요소해석 프로그램과 Morishita 등의 예측식으로 검증하고 비교분석하였다. 분석 결과, LS-DYNA 프로그램을 이용하여 크레틀, 스폴, 브리치의 직경 및 깊이에 대한 개략적인 예측이 가능하며, 폭발하중 하에서 손상부의 거시적 거동을 모사함으로써 부재의 파괴 이력을 나타낼 수 있었다. 국부 손상에 대한 세가지 예측식이 소개되어 있으나 경험식으로써의 한계가 존재하며, 이에 대한 추가 연구가 필요하다고 판단된다.

Keywords

References

  1. Buchan, P. A. and Chen, J. F., "Blast Resistance of FRP Composites and Polymer Strengthened Concrete and Masonry Structures - A State-of-the-art Review", Composite Part B: Engineering, vol. 38, No. 5-6, 2006, pp.509-522.
  2. Cho, S. H., Min, K. H., Kim, Y. J., Yoon, Y. S., "Impact resistance evaluation of RC beams strengthened with carbon FRP sheet and steel fiber", Journal of the Korea Concrete Institute, vol. 22, No. 5, 2010, pp.719-725. (in Korean) https://doi.org/10.4334/JKCI.2010.22.5.719
  3. FMB Zurich, Forschungsinstitut fur militarische Bautechnik Zurich, FMB 79-13, 1979.
  4. Ha, J. H., Yi, N. H., Kim, S. B., Choi, J. K., Kim, J. H., "Experimental study on blast resistance improvement of RC panels by FRP retrofitting", Journal of the Korea Concrete Institute, vol. 22, No. 1, 2010, pp.93-102. (in Korean) https://doi.org/10.4334/JKCI.2010.22.1.093
  5. Kim, M. H., Min K. H., Yoo, D. Y., Yoon, Y. S., "Strengthening effect of CFRP sheets and steel fibers for enhancing the impact resistance of RC beams", Journal of The Korean Society of Hazard Mitigation, vol. 11, No. 5, 2011, pp.41-47. (in Korean)
  6. Kim, S. W., Kang, S. T., Han S. M., "Characteristics and application of ultra high performance cementitious composite", Journal of the Korea Concrete Institute, vol. 18, No. 1, 2006, pp.16-21. (in Korean)
  7. Kim, Y. W., Min, K. H., Yang, J. M., Yoon, Y. S., "Flexural and impact resisting performance of HPFRCCs using hybrid PVA fibers", Journal of the Korea Concrete Institute, vol. 21, No. 6, 2008, pp.705-712. (in Korean) https://doi.org/10.4334/JKCI.2009.21.6.705
  8. Kraus, D., Roetzer, J. and Thoma, K., "Effect of High Explosive Detonations on Concrete Structures", Nuclear Engineering and Design, vol. 150, No. 2-3, 1994, pp.309-314. https://doi.org/10.1016/0029-5493(94)90149-X
  9. Lee, J. Y., Kim, M. H., Min, K. H., Yoon, Y. S., "Analysis of behaviors of concrete strengthened with FRP sheets and steel fibers under low-velocity impact loading", Journal of the Korea Institute for Structural Maintenance Inspection, vol. 15, No. 4, 2011, pp.155-164. (in Korean)
  10. Livemore Software Technology Corporation(LSTC), LS-DYNA, Keyword User's Manual Version971, 2007.
  11. Lonnquist, L., "The Effects of High Explosives in Contact with Reinforced Concrete Plates", Proceedings of the 6th International Symposium on Interaction of Nonnuclear Munitions with Structures, 1993, pp.262-266.
  12. Min, K. H., Lee, J. Y., Kim, M. H. and Yoon, Y. S., "Behaviors of Concrete Segmented Composites Using Polymer Mortar Under Static and Impact Loadings", Journal of the Korea Institute for Structural Maintenance Inspection, vol. 15, No. 5, 2011, pp.170-177. (in Korean) https://doi.org/10.11112/jksmi.2011.15.2.170
  13. Morishita, M., Tanaka, H., Ando, T. and Hagiya, H., "Effects of Concrete Strength and Reinforcing Clear Distance on the Damage of Reinforced Concrete Slabs subjected to Contact Detonation", Concrete Research and Technology, vol. 15, No. 2, 2004, pp.89-98. (in Japanese) https://doi.org/10.3151/crt1990.15.2_89
  14. Morishita, M., Tanaka, H., Ito, T. and Yamaguchi, H., "Damage of Reinforced Concrete Slabs subjected to Contact Detonations", Journal of Structural Engineering, vol. 46A, 2000, pp.1787-1797. (in Japanese)
  15. Ngo, T., Mendis, P. and Krauthammer, T., "Behavior of Ultrahigh-Strength Prestressed Concrete Panels Subjected to Blast Loading", Journal of Structural Engineering, vol. 133, No. 11, 2007, pp.1582-1590. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1582)
  16. Okayama, P., Taketa, J., Kazuo, F., Akira, Y., Ken, T., "Fracture of RC Slabs Subjected to Contact Detonation", Journal of the Industrial Explosives Society, vol. 43-1, 1982, pp.156-167. (in Japanese)
  17. Schenker, A., Anteby, I., Gal, E., Kivity, Y., Nizri, E., Sadot, O., Michaelis, R., Levintant, O. and Ben-Dor, G., "Full-scale Field Tests of Concrete Slabs subjected to Blast Loads", International Journal of Impact Engineering, vol. 35, No. 3, 2008, pp.184-198. https://doi.org/10.1016/j.ijimpeng.2006.12.008
  18. Schwer, L. E. and Malvar, L. J., "Simplified Concrete Modeling with MAT_CONCRET_ DAMAGE_MODEL_REL 3", JRI LS-DYNA User Week, 2005, pp.1-14.
  19. Silva, P. F. and Lu, B., "Improving the Blast Resistance Capacity of RC Slabs with Innovative Composite Materials", Composite Part B: Engineering, vol. 38, No. 5-6, 2007, pp.523-534. https://doi.org/10.1016/j.compositesb.2006.06.015
  20. Takeda, J., Hiroyuki, T., Kazuo, F., Toshiaki, K., Koli, I., "Deformation and Fracture of RC Slabs Subjected to Detonation", Civil Engineering Research Report, vol. 16, 1976, pp.67-73. (in Japanese)
  21. Wang, Z. L., Konietzky, H. and Huang, R. Y., "Elastic- Plastic-Hydrodynamic Analysis of Crater Blasting in Steel Fiber Reinforced Concrete", Theoretical and Applied Fracture Mechanics, vol. 52, No. 2, 2009, pp.111-116. https://doi.org/10.1016/j.tafmec.2009.08.005
  22. Wu, C., Oehlers, D. J., Rebentrost, M., Leach, J. and Whittaker, A. S., "Blast Testing of Ultra-high Performance Fibre and FRP-retrofitted Concrete Slabs", Engineering Structures, vol. 31, No. 9, 2009, pp.2060-2069. https://doi.org/10.1016/j.engstruct.2009.03.020
  23. Yamaguchi, M., Murakami, K., Takeda, K. and Mitsui, Y., "Blast Resistance of Polyethylene Fiber Reinforced Concrete to Contact Detonation", Journal of Advanced Concrete Technology, vol. 9, No. 1, 2011, pp.63-71. https://doi.org/10.3151/jact.9.63
  24. Zhang, X., Yang, X., Chen, Z. and Deng, G., "Explosion Spalling of Reinforced Concrete Slabs with Contact Detonations", Journal of Tsinghua University(Science & Technology), vol. 46, No. 6, 2006, pp.765-768. (in Chinese).

Cited by

  1. The Study on Evaluation of Human Body Injury by Explosion of Portable Butane Gas Range vol.31, pp.3, 2016, https://doi.org/10.14346/JKOSOS.2016.31.3.60
  2. Evaluation of Fracture Behaviours of Cementitious Composites by High-velocity Projectile Impact vol.19, pp.6, 2015, https://doi.org/10.11112/jksmi.2015.19.6.055
  3. Flexural Assessment of Blast-Damaged RC Beams Retrofitted with CFRP Sheet and Steel Fiber vol.2018, pp.1687-9430, 2018, https://doi.org/10.1155/2018/2036436
  4. Strain Response Characteristics of RC Beams Strengthened with CFRP Sheet Using BOTDR vol.10, pp.17, 2013, https://doi.org/10.3390/app10176005