• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.313-327
• /
• 2008

화재 발생 시 지하구조물의 열-역학상호거동이 정확히 고려되지 못하고 있으며, 이로 인해 일반적인 열전달 이론에 근거한 수치해석 시 화재로 인한 구조물의 손상정도가 과소 평가될 수 있는 문제점이 있다. 따라서 본 연구에서는 화재 발생 시 지하구조물의 열-역학 상호거동을 모사하기 위한 유한요소 기반의 수치모델을 새롭게 개발하였다. 특히, 화재로 인한 구조물의 단면 손실을 모사하기 위한 요소제거모델을 제안하였고 대류 경계조건을 적용하였다. 이때 요소 내의 최대 온도가 해석 시에 설정한 임계온도 이상이 되면 요소가 제거되도록 설정하였다. 모형 화재시험 결과와 해석 결과를 비교한 변수해석을 통하여, RABT와 RWS 화재 시나리오 조건에 대한 최적의 임계온도, 요소크기, 온도에 따른 대류열전달계수 조건 등을 제시하였다.

• Kyungpook Mathematical Journal
• /
• 제52권4호
• /
• pp.359-373
• /
• 2012

The block LU factorization is used to solve the coupled Stokes equations arisen from an optimal control problem subject to Stokes equations. The convergence of the spectral element solution is proved. Some numerical evidences are provided for the model coupled Stokes equations. Moreover, as an application, this algorithm is performed for an optimal control problem.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.135-141
• /
• 1996

Numerical analysis techniques have been applied to obtain the vibroacoustic characteristics of the simplified model of a passenger-car cabin. Two kinds of coupled vibration-acoustic analysis, such as one-way coupling and full coupling, have been carried out via the interface between the results of vibration analysis by FEM and acoustic analysis by BEM. The comparison of two coupled analysis results show the fluid-structure interaction in terms of the coupled effect of the vibration and noise.

• 터널과지하공간
• /
• 제30권5호
• /
• pp.446-461
• /
• 2020

MX80 벤토나이트 펠렛에서의 열-수리-역학적 복합거동 특성을 파악하고자 TOUGH2-FLAC3D 시뮬레이터를 이용하여 스페인 CIEMAT에서 수행된 컬럼 시험에 대한 수치해석을 수행하였다. 수치해석에서는 실험실에서 사용된 것과 동일한 히터 파워와 물 주입압을 경계조건으로 설정하고 해석을 수행하였다. 사용된 열-수리 모델이 벤토나이트 펠렛의 복합거동 예측에 적용하기 적합한지 판단하기 위해 가열과 물 주입에 의한 벤토나이트 펠렛에서의 온도와 상대습도 변화를 시간 경과에 따라 잘 예측할 수 있는 지를 살펴보았다. 계산된 결과가 계측된 온도와 상대습도 변화 경향을 적절하게 재현 할 수 있었기 때문에 사용된 열-수리 모델은 벤토나이트 펠렛의 열-수리 복합거동을 예측하고 재현하기에 적절한 것으로 판단된다. 하지만, 물 주입 이후의 계산된 응력변화가 상대적으로 작고 느리게 변화되는 것으로 보아 사용된 탄성모델과 스웰링 모델에 한계점이 존재하는 것으로 보이며, 사용된 두 역학 모델로 완충재의 복잡한 열-수리-역학적 복합거동을 현실적으로 재현하기에 부족한 것으로 판단된다.

• Coupled systems mechanics
• /
• 제5권1호
• /
• pp.1-20
• /
• 2016

This paper firstly briefly describes developed numerical model for both static and dynamic analysis of planar structures made of concrete, steel and masonry. The model can simulate the main nonlinearity of such individual and composite structures. The model is quite simple and based on a small number of material parameters. After that, three real composite concrete-steel-masonry bridges were analyzed using the presented numerical model. It was concluded that the model can be useful in practical analysis of composite bridges. However, future verifications of the presented numerical model are desirable.

• 호남수학학술지
• /
• 제38권3호
• /
• pp.435-454
• /
• 2016

This paper investigates the effect of dual-phase-lags on a thermoviscoelastic orthotropic solid with a cylindrical cavity. The cylindrical cavity is subjected to a thermal shock varying heat and its material is taken to be of Kelvin-Voigt type. The phase-lag thermoelastic model, Lord and Shulman's model and the coupled thermoelasticity model are employed to study the thermomechanical coupling, thermal and mechanical relaxation (viscous) effects. Numerical solutions for temperature, displacement and thermal stresses are obtained by using the method of Laplace transforms. Numerical results are plotted to illustrate the effect phase-lags, viscoelasticity, and the variability thermal conductivity parameter on the studied fields. The variations of all field quantities in the context of dual-phase-lags and coupled thermoelasticity models follow similar trends while the Lord and Shulman's model may be different. The influence of viscosity parameter and variability of thermal conductivity is very pronounced on temperature and thermal stresses of the thermoviscoelastic solids.

• Coupled systems mechanics
• /
• 제11권5호
• /
• pp.459-483
• /
• 2022

In the present work, a new photothermoelastic model based on Moore-Gibson-Thompson theory has been constructed. The governing equationsfor orthotropic photothermoelastic plate are simplified for two-dimension model. Laplace and Fourier transforms are employed after converting the system of equations into dimensionless form. The problem is examined due to various specified sources. Moving normal force, ramp type thermal source and carrier density periodic loading are taken to explore the application of the assumed model. Various field quantities like displacements, stresses, temperature distribution and carrier density distribution are obtained in the transformed domain. The problem is validated by numerical computation for a given material and numerical obtained results are depicted in form of graphs to show the impact of varioustheories of thermoelasticity along with impact of moving velocity, ramp type and periodic loading parameters. Some special cases are also explored. The results obtained in this paper can be used to design various semiconductor elements during the coupled thermal, plasma and elastic wave and otherfieldsin thematerialscience, physical engineering.

• Applied Science and Convergence Technology
• /
• 제23권4호
• /
• pp.169-178
• /
• 2014

Fluid model based numerical analysis is done to simulate a low damage etch back system for 20 nm scale semiconductor fabrication. Etch back should be done conformally with very high material selectivity. One possible mechanism is three steps: reactive radical generation, adsorption and thermal desorption. In this study, plasma generation and transport steps are analyzed by a commercial plasma modeling software package, CFD-ACE+. Ar + $CF_4$ ICP was used as a model and the effect of reactive gas inlet position was investigated in 2D and 3D. At 200~300 mTorr of gas pressure, separated gas inlet scheme is analyzed to work well and generated higher density of F and $F_2$ radicals in the lower chamber region while suppressing ions reach to the wafer by a double layer conducting barrier.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.134-141
• /
• 2008

We have developed a numerical model for a remote ICP(inductively coupled plasma) system in 2D and 3D with gas distribution configurations and confirmed it by plasma diagnostics. The ICP source has a Cu tube antenna wound along a quartz tube driven by a variable frequency rf power source($1.9{\sim}3.2$ MHz) for fast tuning without resort to motor driven variable capacitors. We investigated what conditions should be met to make the plasma remotely localized within the quartz tube region without charged particles' diffusing down to a substrate which is 300 mm below the source, using the numerical model. OES(optical emission spectroscopy), Langmuir probe measurements, and thermocouple measurement were used to verify it. To maintain ion current density at the substrate less than 0.1 $mA/cm^2$, two requirements were found to be necessary; higher gas pressure than 100 mTorr and smaller rf power than 1 kW for Ar.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.655-664
• /
• 2019

In order to analyze the nonlinear phenomena of the bifurcation and chaos caused by the switching of nonlinear switching devices in inductively coupled power transfer (ICPT) systems, a Jacobian matrix model, based on discrete mapping numerical modeling, is established to judge the system stability of the periodic closed orbit and to study the nonlinear behavior of Hopf bifurcation in a system under full resonance. The general flow of the parameter design, based on the stability principle for ICPT systems, is proposed to avoid the chaos and bifurcation phenomena caused by unreasonable parameter selection. Firstly, based on the state equation of SS-type compensation, a three-dimensional bifurcation diagram with the coupling coefficient as the bifurcation parameter is established with a numerical simulation to observe the nonlinear phenomena in the system. Then Filippov's method based on a Jacobian matrix model is adopted to deduce the boundary of stable operation and to judge the type of the bifurcation in the system. Then the general flow of the parameter design based on the stability principle for ICPT systems is proposed through the above analysis to realize stable operation under the conditions of weak coupling. Finally, an experimental platform is built to confirm the correctness of the numerical simulation and modeling.