• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.503-510
• /
• 2020

Concrete is one of the most widely used materials as the shielding structures of a nuclear facilities. It is also the most generated radioactive waste in quantity while dismantling facilities. Since the concrete captures neutrons and generates various radionuclides, radiation measurement and analysis of the sample was fulfilled prior to dismantle facilities. An HPGe detector is used in general for the radiation measurement, and effective correction factors such as geometrical correction factor, self-absorption correction, and absolute detector efficiency have to be applied to the measured data to decide exact radioactivity of the sample. Correction factors are obtained by measuring data using a standard source with the same geometry and chemical states as the sample under the same measurement conditions. However, it is very difficult to prepare standard concrete sources because concrete is limited in pretreatment due to various constituent materials and high density. In addition, the concrete sample obtained by core drill is a volumetric source, which requires geometric correction for sample diameter and self absorption correction for sample density. Therefore in recent years, many researchers are working on the calculation of effective correction factors using Monte carlo simulation instead of measuring them using a standard source. In this study we calculated, using Geant4, one of the Monte carlo codes, the correction factors for the various diameter and density of the concrete core sample at the gamma ray energy emitted from the nuclides ¹⁵²Eu and ⁶⁰Co, which are the most generated in radioactive concrete.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.33-39
• /
• 2020

In this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires. The proposed technique consists of four processes: noise correction by load and vibration, gas flow correction, data mixer and weight conversion. Noise correction by load and vibration eliminates noise that increases the tire's internal pressure due to external shocks and vibrations produced by the vehicle while it is in motion. In the gas flow correction process, the noise of the internal pressure of the tire is increased due to the temperature rise of the ground with respect to the data obtained through the noise correction process due to the load and vibration. In the data mixer process, the load and pressure on the tolerances the empty, median and the full load are classified according to the change in pressure of the tire that is delivered perpendicular to the tire in the event of cargo. In the weight conversion process, weight is expressed by weight through weight conversion algorithms using noise correction results by load and vibration and gas flow correction. The weight conversion algorithm calculates the weight conversion factor, which is the slope of the linear function with respect to the load and pressure change, and converts the weight. In order to evaluate the accuracy of the loading weight measurement system of the vehicle using the tire pneumatic system technique proposed in this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires.. Noise correction results by load and vibration and gas flow data correction results showed reliable results. In addition, repeated weight precision test showed better weight accuracy than the standard value of 90% of domestic companies.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.99-108
• /
• 2018

The purpose of this study is to determine the precise height in mountainous areas of South Korea and Jiri mountain area was selected as a test bed for the study. Gravity observation and GNSS surveying were performed for 44 BM(Benchmark) points in the test bed and calculate the height and the height correction. In the calculation, the dynamic correction amount, the orthometric correction amount and the normal correction amount were calculated, and the dynamic height and orthometric height and the normal height were calculated considering each correction amount. The results showed that the difference between normal gravity and observed gravity and also the difference between orthometric correction and the normal correction. In addition, the results of the comparison of the present official BM height and the computed orthometric height in this study show that Korean height system should be shifted from the normal orthometric height system to the orthometric height system. Because the difference between the orthometric correction and the normal correction within the test bed indicated a distribution of at a minimum of -234.41 mm up to 196.925 mm, and the difference between the present official BM height and the calculated orthometric height were distributed from -0.121m to 0.011 m.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.20 no.1
• /
• pp.118-147
• /
• 2020

Objective : The purpose of this study is to understand trends of pelvic correction therapy in Korea and to assist research activities on pelvic correction therapy. Also, this study selected and presented indicators for measuring pelvic slope to help ensure consistent studies with uniform indicators in future studies related to pelvic correction. Methods : The following keywords "골반", "골반 교정", "골반 변위" "Pelvic correction" were searched on three specialized search sites (RISS, NAI, DBpia). Trends in pelvic correction therapy were analyzed through the selected researches suitable among these searched researches in an overview format. Results : 1. A total of 7,806 studies were searched and a total of 268 studies were finally selected. 2. Studies began in 1977 and have been actively studied until recently, with 35 studies in 2017 being the most recent trend since 2000. 3. In the results according to the Main Field of Research, the 'Arts and Kinesiology'(113, 42.16%) and 'Medicine and Pharmacy'(103, 38.43%) were the most in order. To the Middle Field, the 'Kinesiology was the largest with 96(35.82%) studies. 4. In the results according to the study design, 'Pre-Post Test(PPT)' was the largest with 107 studies. 5. In the results according to the Intervention, 'Exercise' was the largest with 165 studies, of which 'Pilates' and 'Yoga' in 'Training' was the largest. 6. Among the evaluation method, the 'Pelvic Index' was used 146 times, followed by 'Spinal Alignment (99)', 'Other Joints (93)', and 'Kinetic Specialized Measurement Test (56)'. 7. Among the evaluation methods, the pelvic slope measurement indicators were PT (58), PH (48), Pelvic Torsion (40), Iliac Crest (38), ASIS-PSIS distance/angle (27), and Pelvic Width (I.W., I.L., S.W) (25) in order. 8. The journals that published the most researches were KJSS(Korean Alliance For Health, Physical Education, Recreation, And Dance;9), and JKPT(Korean Physical Therapy;9). Among the University, the Graduate School of Silla University published the most papers (12). 9. The author who published the most studies were Seungjin Park(3), the co-authors were Hoseong Lee, Gideok Park, Seongsu Bae(3), and the Thesis-Director Gyeongok Lee(7). Conclusions : 1. Studies on pelvic correction treatment continue to increase every year. 2. The main academic field of pelvic correction is 'Sports', 'Physical Therapy', and 'Medical Science'. 3. The most chosen research design method in the study on pelvic correction treatment was 'Pre-Post Test(PPT)', primarily as an intermediary, Pilates and yoga during exercise therapy, and then Chiropractic during handcraft were used as multiple frequencies. 4. Among the various measurement method indicators of pelvic correction previously used, multiple frequency was taken up in the order of PT, PH, Pelvic Torsion, iliac crest, ASIS-PSIS distance/angle, and pelvic width (I.W.,I.L.,S.W). Typically, measurements through "ASIS-PSIS angle" are recommended and are considered as the most rational in clinical trials.

• The Korean Journal of Applied Statistics
• /
• v.35 no.3
• /
• pp.457-457
• /
• 2022

• Genomics & Informatics
• /
• v.6 no.4
• /
• pp.231-234
• /
• 2008

Precise and reliable identification of CNV is still important to fully understand the effect of CNV on genetic diversity and background of complex diseases. SNP marker has been used frequently to detect CNVs, but the analysis of SNP chip data for identifying CNV has not been well established. We compared various normalization methods for CNV analysis and suggest optimal normalization procedure for reliable CNV call. Four normal Koreans and NA10851 HapMap male samples were genotyped using Affymetrix Genome-Wide Human SNP array 5.0. We evaluated the effect of median and quantile normalization to find the optimal normalization for CNV detection based on SNP array data. We also explored the effect of Robust Multichip Average (RMA) background correction for each normalization process. In total, the following 4 combinations of normalization were tried: 1) Median normalization without RMA background correction, 2) Quantile normalization without RMA background correction, 3) Median normalization with RMA background correction, and 4) Quantile normalization with RMA background correction. CNV was called using SW-ARRAY algorithm. We applied 4 different combinations of normalization and compared the effect using intensity ratio profile, box plot, and MA plot. When we applied median and quantile normalizations without RMA background correction, both methods showed similar normalization effect and the final CNV calls were also similar in terms of number and size. In both median and quantile normalizations, RMA backgroundcorrection resulted in widening the range of intensity ratio distribution, which may suggest that RMA background correction may help to detect more CNVs compared to no correction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.77-87
• /
• 2011

In this paper, we propose a disparity correction technique to reduce the inherent visual discomfort while watching stereoscopic videos. The visual discomfort must be solved for commercial 3D display systems to provide natural stereoscopic videos to human eyes. The proposed disparity correction technique consists of horizontal and vertical disparity corrections. The horizontal disparity correction is implemented by controlling the depth budget of stereoscopic video using the geometric relations of a stereoscopic camera system. In addition, the vertical disparity correction is implemented by using a feature-based stereo matching algorithm. Conventional vertical disparity corrections have been done by only using camera calibration parameters, which still cause systematic errors in vertical disparities. In this paper, we minimize the vertical disparity as small as possible by using a feature-based correction algorithm. Through the comparisons of conventional feature-based correction algorithms, we analyze the performance of the proposed technique.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2010

Ionization chambers often exhibit a stem effect, caused by interactions of radiation with air near the chamber end, or with dielectric in the chamber stem or cable. In this study measured stem effect correction factor for length of ionization chamber from medical linear accelerator recommend to with the use of stem correction method. For a model of the Farmer-type chamber, were used to calculate the beam quality correction factor. These interactions contribute to the apparent measured exposure. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field. Linear accelerator generated photons energy and increased dose repeatedly measured by using stem correction method. Stem effect was dependence of the energy and increases with photon energy conditions improved of beam quality. In conclusion, stem effect correction factor was measured within 0.4% calculated according to the exposures stem length and also supposed to determined below 1% of another stem correction method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.117-126
• /
• 2016

In this study, a new meta-heuristic optimization algorithm, Vision Correction Algorithm (VCA), designed according to the optical properties of glasses was developed. The VCA is a technique applying optometry and vision correction procedure to optimization algorithm through the process of myopic/hyperopic correction-brightness adjustment-compression enforcement-astigmatism adjustment. The proposed VCA unlike the conventional meta-heuristic algorithm is an automatically adjusting global/local search rate and global search direction based on accumulated optimization results. The proposed algorithm was applied to the representative optimization problem (mathematical and engineering problem) and results of the application are compared with that of the present algorithms.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.159-172
• /
• 2006

In this study, the series of Landsat TM/ETM+ images was acquired to extract land surface temperature for wide-area and executed geometric correction and radiometric correction. And the land surface temperature was extracted using NASA Model, and achieved the first correction by performing land coverage category for study area and applied characteristic emission rate. Land surface temperature which was acquired by the first correction was analyzed in correlation with Meteorological Administration's temperature data by regression analysis, and established correction formula. And I wished to improve accuracy of land surface temperature extraction using satellite image by second correcting deviations between two data using establishing correction formula. As a result, land surface temperature acquired by 1st and 2st correction could be corrected in mean deviation of about ${\pm}3.0^{\circ}C$ with Meteorological Administration data. Also, I could acquire land surface temperature about study area by higher accuracy by applying to other Landsat images for re-verification of study results.