• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.156-161
• /
• 1986

Silage productivity and resistance to rice black streaked dwarf virus (RSDV) of six Korean-improved and six US introduced corn genotypes were tested in the southern part of Korea. There was a negative correlation between culm length retarded by RBSDV and coefficients of variance of culm length. Frequency distribution of culm length could be classified as three genotypic groups according to the type of distribution and percentage of RBSDV diseased plants. There were negative correlations between percent RBSDV diseased plants at harvest and culm length, percent ear bearing plants, silage yield, or ear yield, but percent RBSDV diseased plants did not related to the ear/silage ratio and stover yield. Silage yield of Pioneer XCF38 was highest, but that of Suweon 89 and NC 6131 was lowest. However, there was not signi-ficant difference in silage yield among the remaining genotypes. Pioneer XCF38, Suweon 89, and Jinjuok were quite resistant to RBSDV, but Suweon 19, Kwangok, Hoengseongok, Jecheonok, and Pioneer 3424 were susceptible and NC 6131 was most susceptible to RBSDV. Although Jinjuok and Suweon 89 were resistant to RBSDV, silage yield was not high because of early senescence of leaves after silkillg.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.54-60
• /
• 2022

The planting date of corn for silage has been delayed because of spring drought and double cropping system in Korea. This experiment was conducted to evaluate agronomic characteristics, forage production and feed value of corn at April and May in 2019. Experimental design was a split-plot with three replications. Planting dates (12 April and 10 May) were designated to the main plot, and corn hybrids ('P0928', 'P1543' and 'P2088') to the subplot. The silking days of the early planting date (12 April) was 79 days and that of the late planting date (10 May) was 66 days (p<0.0001), however, there were no significant differences among the corn hybrids. Ear height of the late planting date was higher than that of the early planting (p<0.05), while there were no significant differences in plant height of corn. Insect resistance at the early planting was lower than that of late planting (p<0.05), however, lodging resistance was no significant difference at planting date. The rice black streaked virus (RBSDV) infection of early planting was 3.7% and that of late planting was 0.3% (p<0.001). Dry matter (DM) contents of stover, ear and whole plant had significant difference at planting date (p<0.05). And differences in ear percentages were observed among the corn hybrids (p<0.01). And ear percentages of early maturing corn ('P0928') was higher than for other hybrids. Ear percentage at the early planting date was higher than that at the late planting date (p<0.01). DM and total digestible nutrients (TDN) yields had significant difference at planting date, however, there were no significant differences among the corn hybrids. DM and TDN yields at the late planting (21,678 kg/ha and 14,878 kg/ha) were higher than those of the early planting (13,732 kg/ha and 9,830 kg/ha). Crude protein content at the early planting date was higher than that of the late planting. Acid detergent fiber content of the late planting was lower than that of the early planting date (p<0.01), while there were no significant neutral detergent fiber content difference among the corn tested. Calculated net energy for lactation (NE_L) and TDN at the early planting were higher than those of at the late planting (p<0.01). Results of this our study indicate that the late planting date (May) is better than early planting date (April) in forage yield and feed value of corn. Therefore, the delay of planting date by May was more suitable for use in cropping system.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.125-131
• /
• 2015

Kluyveromyces marxianus is a well-known thermotolerant yeast. Although Saccharomyces cerevisiae is the most commonly used yeast species for ethanol production, the thermotolerant K. marxianus is more suitable for simultaneous saccharification and fermentation (SSF) processes. This is because enzymatic saccharification usually requires a higher temperature than that needed for the optimum growth of S. cerevisiae. In this study, we compared the fermentation patterns of S. cerevisiae and K. marxianus under various temperatures of fermentation. The results show that at a fermentation temperature of $45^{\circ}C$, K. marxianus exhibited more than two fold higher growth rate and ethanol production rate in comparison to S. cerevisiae. For SSF using starch or corn stover as the sole carbon source by K. marxianus, the high temperature ($45^{\circ}C$) fermentations showed higher enzymatic activities and ethanol production compared to SSF at $30^{\circ}C$. These results demonstrate the potential of the thermotolerant yeast K. marxianus for SSF in the industrial production of biofuels.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.5
• /
• pp.740-746
• /
• 2021

Efficient cellulolytic enzyme production is important for the development of lignocellulose-degrading enzyme mixtures. However, purification of cellulases from their native hosts is time- and labor-consuming. In this study, a constitutive expression system was developed in Penicillium oxalicum for the secreted production of proteins. Using a constitutive polyubiquitin gene promoter and cultivating with glucose as the sole carbon source, nine cellulolytic enzymes of different origins with relatively high purity were produced within 48 h. When supplemented to a commercial cellulase preparation, cellobiohydrolase I from P. funiculosum and cellobiohydrolase II from Talaromyces verruculosus showed remarkable enhancing effects on the hydrolysis of steam-exploded corn stover. Additionally, a synergistic effect was observed for these two cellobiohydrolases during the hydrolysis. Taken together, the constitutive expression system provides a convenient tool for the production of cellulolytic enzymes, which is expected to be useful in the development of highly efficient lignocellulose-degrading enzyme mixtures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.259-264
• /
• 1999

A field experiment was carried out to determine the optimum application level of dicamba herbicide for efficient control of Calystegia japonica in silage corn field. Six treatments of application levels (0 ; control, $0.75{\ell},\;1.0{\ell},\;1.25{\ell},\;1.5{\ell},\;and\;2.0{\ell}/ha$) were arranged at National Livestock Research Institute, RDA, Suwon in 1995. The hybrid silage corn was DK 729, and dicamba herbicide was applied at 5~6 leaf stage of corn. The growth of corn was poor in control plot, and the days for tasseling and silking were delayed 1~4 days when compared with the plots of herbicide application. The control efficiency of Calystegia japonica was excellent as 74.3~94.6% in the plots of dicamba application. A slight injury of herbicide was observed at early stage of corn when applied at $1.25{\ell}$ and $1.5{\ell}$ of dicamba per ha, and severe injury was found at $2.0{\ell}$ of dicamba. Forage dry matter(DM) yield, and length of ear in the plots of dicamba treatments were significantly higher than those of control. The DM yield of control(4,866kg/ha) was only about 30% of dicamba treatment plot (14,960~16,340kg/ha). However, there was no yield difference among dicamba application level. The percentage of ear to total DM yield was ranged from 33.6 to 39.4%. With application of herbicide, the contents of crude protein and nitrogen free extract were increased, and that of crude fiber was decreased in stover. However, nutritive value of corn ear was very similar among all treatments, regardless of herbicide treatment. From the above results, it is recommended that optimum application level of dicamba herbicide was $0.75{\sim}1.0{\ell}/ha$ for efficient control of Calystegia japonica and for silage corn production without herbicide injury.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.201-207
• /
• 1987

This experiment was conducted to identify the superior corn hybrids for silage production and to determine the combining ability of their parental inbred lines. A 7-entry diallel cross was evaluated for grain and stover yields, and agronomic characters under 3 different seasons. Hybrids Hi34 x Tx601, Hi26 x Hi34, and Hi29 x Hi34 showed high total dry matter yields. In general, late maturing hybrids had higher grain and silage yields than early maturing hybrids. Leaf area index was correlated with grain and stover yields. Rust rating was negatively correlated with yields and all characters, indicating that rust (Puccinia sorghi) was one of the major factors affecting yields. Diallel analysis showed that inbred Hi34 which was late in maturity and resistant to rust was the best combiner for both grain and silage yields. General combining ability (GCA) and specific com-bining ability (SCA) effects for yields and other characters were significant, suggesting that both additive and non-additive gene effects are involved for those characters. Ratio of GCA/SCA mean squares showed that GCA effects were more important than SCA effects for yields and other characters. GCA x season and SCA x season interactions were significant for grain and stover yields, revealing that gene effects were not stable for those yields under dissimilar environments.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2008

The world demand of ethanol as an alternative fuel for gasoline is increasing rapidly because of high oil price and global climate change. Most of ethanol is currently produced from corn grain or sugars in sugarcane and sugar beet. Because these sources compete with foods and animal feed and are not expected to be enough for future demand of ethanol. Thus, cellulosic ethanol from agricultural residues or wood has to be commercialized in near future. Typical cellulosic ethanol production consists of pretreatment, enzyme hydrolysis, fermentation and product separation. This paper reviews the principles and status of each step and discusses issues for cellulosic ethanol production.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2020

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24^th and the silking date was July 27^th, but the P2105 variety was late to July 28^th and August 1^st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.52-56
• /
• 1991

In 1986, at Cheju and Seoguipo, a sweet com hybrid, Golden Cross Bantam 70, was grown at 5 phosphate rates (0, 8, 16, 24 and 32 kg/l0a) to determine effects of phosphate rate on growth and yield of sweet com and to recommend the optimum phosphate rate for sweet com production in volcanic ash soils of Cheju province. Days to silking were shortened 1 to 2 days by phosphate application of more than l6kg/10a. Culm length, ear height and fresh stover yield/l0a did not differ between two locations, but linearly increased as phosphate rate was increased from 0 to 32kg/10a. Average length and weight of marketable ears were greater at Cheju than at Seoguipo and linearly increased as phosphate rate increased. The number of marketable ears per plant and per l0a did not differ between two locations, but quadratically increased as phosphate rate increased. The economic optimum phosphate rate estimated on the basis of the quadratic model, ranged 25.6 to 27.4kg/10a at various fertilizer-to-ear price ratios.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.402-406
• /
• 2014

The present study was carried out to evaluate the potential of lignocellulosic byproducts for the production of citric acid through solid-state fermentation by Aspergillus niger NRRL 567. A sequential optimization based on one-factor-at-a-time method was applied to optimize fermentation conditions and media constituents. The results obtained from the optimization indicated that $30^{\circ}C$, 70% moisture content, 0.5~1.0 mm particle size, pH 5.5 and 4% methanol were found to be the optimum condition at 72 hr fermentation. The application the optimization resulted in an improvement of maximum citric acid production from 74.5 to 206.0 g/kg dry material (DM) from wheat straw. The optimal condition was used to produce citric acid from A. niger grown on different lignocellulosic byproducts, including wheat straw, corn stover and peat moss. A. niger produced the highest citric acid levels of 231.8, 213.8 and 240.2 g/kg DM at 120 hr fermentation, respectively.