• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.231-242
• /
• 2008

Purpose: The purpose of this study was to investigate the bond strength of the core-veneer interface in all ceramic systems. Material and Methods: The all ceramic systems tested with their respective veneer were IPS Empress 2 with IPS Eris, IPS e.max Press with IPS e.max Ceram and IPS-e.max ZirCAD with IPS e.max Ceram. Cores (N=36, N=12/group, diameter: 10mm, thickness: 3mm) were fabricated according to the manufacturer's instruction and cleaned with ultrasonic cleaner. The veneer(diameter: 3mm, thickness: 2mm) were condensed in stainless steel mold and fired on to the core materials. After firing, they were again ultrasonically cleaned and embedded in acrylic resin. The specimens were stored in distilled water at $37^{\circ}C$ for 1 week. The specimens were placed in a mounting jig and subjected to shear force in a universal testing machine(Z020, Zwick, Germany). Load was applied at close to the core-veneer interface as possible with crosshead speed of 1.00mm/min until failure. Average shear bond strengths(MPa) were analyzed with a one-way analysis of variance and the Tukey test(${\alpha}=.05$). The failed specimens were examinated by scanning electron microscopy(JSM-6360, JEOL, Japan). The pattern of failure was classified as cohesive in core, cohesive in veneer, mixed or adhesive. Results: The mean shear bond strength($MPa{\pm}SD$) were IPS e.max Press $32.85{\pm}6.75MPa$, IPS Empress 2 $29.30{\pm}6.51MPa$, IPS e.max ZirCAD $28.10{\pm}4.28MPa$. IPS Empress 2, IPS e.max Press, IPS e.max ZirCAD were not significantly different from each others. Scanning electron microscopy examination revealed that adhesive failure did not occur in any all ceramic systems. IPS Empress 2 and IPS e.max Press exhibited cohesive failure in both the core and the veneer. IPS e.max ZirCAD exhibited cohesive failure in veneer and mixed failure.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.25-37
• /
• 2013

Purpose - The structure of retailing has changed as retailers develop markets in response to business environment changes. This study aims to analyze the general situation of retailers in order to predict future global strategy using case studies of overseas expansion strategy and the Metro Group's global strategy. Research design, data, and methodology - The backgrounds to the new retail business model and retailer classification are analyzed as theoretical data. In addition, the key success point of the Metro Group's "cash and carry" strategy is analyzed as is the Metro Group's global CFAR (collaborative planning, forecasting, and replenishment) strategy. Finally, the plan for cooperation and precise forecasting under the Metro Group's supply chain management are analyzed from the promotion environment viewpoint. Related materials analyzed included the 2012 annual report, the Metro Group's web page, and a video interview with the executive in charge of global strategy and the new market development department. Some data were revised to avoid disrupting essential aspects of the case studies. Results - The important finding was that the Metro Group could be a world-class retail company with its successful global expansion strategy. The Metro Group's global strategy's primary goal is to have a leading business position in Eastern and Western Europe. The "cash and carry" strategy is highest priority in its overseas expansion strategy. Moreover, the Metro Group has standardized product planning capacity, which could be applied in various countries with different structural and cultural backgrounds. This is the main reason that the Metro Group could rapidly become successful in the Eastern Europe and Asian markets through its structural overseas expansion strategies. In addition, the Metro Group emphasizes the importance of supply chain management. Conclusions - First, retailers should create additional value through utilizing the domestic market, market power, and economies of scale to launch a global strategy to maximize benefits from diversification. Second, the political, economic, and cultural background of the target country needs to be understood to successfully implement the overseas expansion strategy. Third, the main factor of successful cooperation with a local partner is how quickly the company gains total understanding of the business resources and core competence of its partner. All organizations should focus on the achievement of goals in order to successfully operate the partnership. Fourth, retailers should improve their business, financial and organizational structure. Moreover, the work processes and company culture should also be improved to respond strongly in the competitive global market. Fifth, the essential point of a successful retail business is the control capacity of its branding and format. The retailer could avoid forecasting errors through supply chain management by perfectly distributing the actual amount of its inventory. In addition, the risks along the supply chain are effectively shared between the supply chain partners. Finally, the central tendency of the market is to gain in strength with this taking place across all parts of the business.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2013

Objective: To investigate roles of dynamic contrast enhanced magnetic resonance (DCE MR) and diffusion-weighted (DW) imaging in preoperative prediction of underestimation of ductal carcinoma in situ (DCIS) ${\geq}2cm$ on US guided core needle biopsy. Materials and Methods: Twenty two patients with DCIS on US-guided 14 gauge core needle biopsy were included. Patients were divided into a group with and without DCIS underestimation based on histopathology. MR images including DCE and DW imaging were obtained with a 3.0-T MR. The lesion type (mass or non-mass), enhancement pattern, peak enhancement, and apparent diffusion coefficient (ADC) values of proven malignant masses were generated using software of CADstream and compared between two groups using Fisher's exact test and Mann Whitney test. Results: Eight patients were in the group with underestimation and 14 patients were in the group without underestimation. The lesion type and enhancement pattern were not different between two groups (P values = 1.000 and 0.613, respectively). The median peak enhancement of lesions with underestimation was 159.5%, higher than 133.5% of those without underestimation, but not significant (P value = 0.413). The median ADC value of lesions with underestimation was $1.26{\times}10^{-3}mm^2/sec$, substantially lower than $1.35{\times}10^{-3}mm^2/sec$ of those without underestimation (P value = 0.094). Conclusion: ADC values had the potential to preoperatively predict DCIS underestimation on US-guided core needle biopsy, although a large prospective series study should be conducted to confirm these results.

• Clean Technology
• /
• v.25 no.2
• /
• pp.107-113
• /
• 2019

Numerical model that considered the shrinking core model and elutriation and degradation of particles was developed to predict selective chlorination of ilmenite and carbo-chlorination of $TiO_2$ in a two stage fluidized bed chlorination furnace. It is possible to analyze the fluidized bed chlorination reaction to be able to reflect particle distribution for mass balances and the chlorination reaction. The numerical model showed an accuracy with error less than 6% compared with fluidized bed experiments. The chlorination degree with particle size change was greater with a smaller particle size, and there was a 100 min difference to obtain a chlorination degree of 1 between $75{\mu}m$ and $275{\mu}m$. This was not shown to such a great extent with variation of temperature ($800{\sim}1000^{\circ}C$), and there was only a 10 min difference to obtain a chlorination degree of 0.9. In the first selective chlorination process, the mass reduction rate approached to the theoretical value of 0.4735 after 180 min, and chlorination changed the Fe component into $FeCl_2$ or $FeCl_3$ and showed nearly 1. In the second carbo-chlorination process, the chlorination degree of $TiO_2$ approached 0.98 and the mass fraction reached 0.02 with conversion into $TiCl_4$. In the first selective chlorination process, 98% of $TiO_2$ was produced at 180 min, and this was changed into 99% of $TiCl_4$ after an additional 90 min. Also the mass reduction rate of $TiO_2$ was reduced to 99% in the second continuous carbo-chlorination process.

• The Journal of Korean Society for School & Community Health Education
• /
• v.9 no.1
• /
• pp.47-61
• /
• 2008

Objectives: This study examined to explain the practical health behaviour and health-related quality of life, and their influencing factors in high school students. Methods: Total of 718 high school students from 1 school in Seoul were assessed with a self-administered questionnaire regarding general characteristics, health related characteristics, obesity index(Height and weight calculated by using the relative weight law: obesity group>20%, overweight group $10{\sim}20%$, normal weight group $-10{\sim}10%$, under weight group <-10%), health behaviour in school-aged children(eating, exercise and weight control) and health-related quality of life(PedsQLTM4.0 Generic Core Scale: physical health, emotional functioning, social functioning, school functioning). Results: Major results were as follows. 1. The rate of obesity by obesity index was 5.3% of high school students. Obesity incidence in adolescents was mainly associated with gender and parents whether obesity. 2. Perceived health status was lower in obese adolescents than in normal adolescents. 3. The rate of miss a breakfast was 37.9%, and obesity group than normal weight group were fruits, vegetables and milk intake at least, a lot of fastfood intake. During the past week, followed by intense physical activity, and overweight consumed a lot of time for TV and the Internet. Overall, under weight group and normal weight group belong to the students evaluated fatter than themselves. Weight control for weight loss, gain and maintain was grater in obesity group than in normal weight group. Weight loss showed highest scores in overweight group which appeared significant difference. 4. Obese adolescents compared with other groups, reported lower total QOL score and all QOL in domain, and especially social functioning showed significant differences. 5. Factors influencing the adolescents's QOL were found to be gender, perceived health status and exercise. Conclusions: High school girls were aware of their bad health status and likely to improve the QOL by practicing health behaviour. But obese adolescents were likely to degrade the quality of life by reducing the practice of health behaviors. So further school-based education about proper practical health behaviors and obesity prevention is necessary.

• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.70-79
• /
• 1984

With the help of the nuclear computational system for a large LMFBR (KAERI-26 group cross section library/1DX/2DB), the reactivity coefficients for the diagrid expansion and the pad expansion at the beginning of cycle of the equilibrium core of SUPER-PHENIX I are calculated and reviewed. the core is described using R-Z geometry model, and a two-dimensional multigroup diffusion theory is used. For reference cases, reactivity calculations for radial and axial uniform expansion are performed, and also calculated are reactivity variations due to changes in material density and core volume. The reactivity coefficient for the diagrid expansion is calculated to be -0.553pcm/mil. The temperature coefficient corresponding to the above value is -1.0766pcm/$^{\circ}C$ and is well in accord with the French datum of -1.09pcm/$^{\circ}C$ within 1.2% difference. With the use of 4he calculational method for the diagrid expansion effect, reactivity calculations for the pad expansion bringing about nonuniform expansion are performed, which show that the calculational method is very useful in the analysis of the pad expansion effect. The reactivity coefficients for the pad expansion are calculated to be -0.2743 pcm/mil and -0.2786pcm1mi1 for the averaged expansion model and for the integrated pancake model, respectively. Under the assumption of the free expanding core the temperature reactivity coefficients for each model are obtained to be -0.5766pcm/$^{\circ}C$ and -0.5858pcm/$^{\circ}C$, both of which agree with the French datum of -0.574pcm/$^{\circ}C$ within 2% difference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.244-250
• /
• 2017

The most important aspect determining the completeness of aprosthesis is itsmarginal and internal fit. Alloysare processed using a softening/hardening heat treatment methodin order to improve their mechanical, physical properties and polishing properties. To examinehow the heat treatment method affects the marginal and internal fit of the Ni-Cr alloy core,thirty dental stone models of the abutment of the mandibular left molar were manufactured.The Ni-Cr alloy coreswere manufactured by the dipping method for the experiment and dividedinto three groups; A for no heat treatment, B for softening heat treatment and C for hardening heat treatment. The marginal and internal fitsof all of the groups were measured by the silicone replica technique. A statistical analysis was performed using one-way ANOVA(${\alpha}=0.05$) in order to examine whether there is a significant difference in the average values of the marginal and internal fits among the three groups and it was found that themarginal fits (1, 6) were significantly different (p<0.05), but the internal fits (2, 3, 4, 5) were not significantly different (p>0.05). These results show that Ni-Cr alloys should not be processed bythe heat treatmentmethod.However, they need to be confirmed in further clinical application studies.

• The Journal of Information Systems
• /
• v.27 no.1
• /
• pp.171-191
• /
• 2018

Purpose Corporate technology leakage is not only monetary loss, but also has a negative impact on the corporate image and further deteriorates sustainable growth. In particular, since SMEs are highly dependent on core technologies compared to large corporations, loss of technology leakage threatens corporate survival. Therefore, it is important for SMEs to "prevent and protect technology leakage". With the recent development of data analysis technology and the opening of public data, it has become possible to discover and proactively detect companies with a high probability of technology leakage based on actual company data. In this study, we try to construct profiles of enterprises with and without technology leakage experience through profiling analysis using data mining techniques. Furthermore, based on this, we propose a classification model that distinguishes companies that are likely to leak technology. Design/methodology/approach This study tries to develop the empirical model for prevention and protection of technology leakage through profiling method which analyzes each SME from the viewpoint of individual. Based on the previous research, we tried to classify many characteristics of SMEs into six categories and to identify the factors influencing the technology leakage of SMEs from the enterprise point of view. Specifically, we divided the 29 SME characteristics into the following six categories: 'firm characteristics', 'organizational characteristics', 'technical characteristics', 'relational characteristics', 'financial characteristics', and 'enterprise core competencies'. Each characteristic was extracted from the questionnaire data of 'Survey of Small and Medium Enterprises Technology' carried out annually by the Government of the Republic of Korea. Since the number of SMEs with experience of technology leakage in questionnaire data was significantly smaller than the other, we made a 1: 1 correspondence with each sample through mixed sampling. We conducted profiling of companies with and without technology leakage experience using decision-tree technique for research data, and derived meaningful variables that can distinguish the two. Then, empirical model for prevention and protection of technology leakage was developed through discriminant analysis and logistic regression analysis. Findings Profiling analysis shows that technology novelty, enterprise technology group, number of intellectual property registrations, product life cycle, technology development infrastructure level(absence of dedicated organization), enterprise core competency(design) and enterprise core competency(process design) help us find SME's technology leakage. We developed the two empirical model for prevention and protection of technology leakage in SMEs using discriminant analysis and logistic regression analysis, and each hit ratio is 65%(discriminant analysis) and 67%(logistic regression analysis).

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.257-266
• /
• 2010

The purpose of this study was to determine the effect of post types and sizes on fracture resistance in immature tooth model with various restorative techniques. Bovine incisors were sectioned 8 mm above and 12 mm below the cementoenamel junction to simulate immature tooth model. To compare various post-and-core restorations, canals were restored with gutta-percha and resin core, or reinforced dentin wall with dual-cured resin composite, followed by placement of D.T. LIGHT-POST, ParaPost XT, and various sizes of EverStick Post individually. All of specimens were stored in the distilled water for 72 hours and underwent 6,000 thermal cycles. After simulation of periodontal ligament structure with polyether impression material, compressive load was applied at 45 degrees to the long axis of the specimen until fracture was occurred. Experimental groups reinforced with post and composite resin were shown significantly higher fracture strength than gutta-percha group without post placement (p < 0.05). Most specimens fractured limited to cervical third of roots. Post types did not influence on fracture resistance and fracture level significantly when cement space was filled with dual-cured resin composite. In addition, no statistically significant differences were seen between customized and standardized glass fiber posts, which cement spaces were filled with resin cement or composite resin individually. Therefore, root reinforcement procedures as above in immature teeth improved fracture resistance regardless of post types and sizes.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.67-76
• /
• 2020

This study aims to elicit criteria regarding reassessment and designation of linear scenic sites henceforth. The results are as follows; First, based on the documents from the Cultural Properties Protection Committee of Korea, 23 out of 113 scenic sites in Korea were drawn, and their linear characteristics were categorized into four types including valleys, paths, rivers, and ridges. The linear scenic sites provide certain features in terms of sequence and direction, which results in the similar utilization among the sites which share the linear similarity. Second, the 23 sites mentioned above were intensely examined on the basis of six criteria for linear scenic sites through FGI, focus group interview. The criteria consist of six elements involving core resource(12), lot number(8), unclear(8), management path(5), ridge(4), basin(3). Third, the Cultural Heritage Administration has prioritized core resource since 2010, when designating a scenic site, whereas it tended to consider lot number as priority prior to 2010. It is thought that the authority gave consideration to issues related to private ownership of property in the scenic sites and the purpose of designation. Fourth, scenic sites are generally designated in accordance with the boundary of core resource, and in most cases, there are buffer zones alongside the core resource.