• Advances in nano research
• /
• v.8 no.4
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.141-151
• /
• 2020

Purpose: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. Materials and Methods: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. Results: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups(P<0.05). Conclusion: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.163-173
• /
• 1998

Suite of log analysis techniques consisting of geophysical well log, geological core log, and physical core log have been made to understand the well log responses and to determine the lithology of a test borehole-PABH1 located in Pungam sedimentary basin, Sosok, Hongchon-gun, Kangwon Province. Geological core logging has been precisely made over the cores taken between 64 and 124 meters, and 11 groups of rock types were deduced. Using the core samples divided by 11 groups, geophysical property measurements consisting of resistivity, natural gamma and density were made. Each rock group in the area is shown to have its characteristic physical response from geophysical well log and geophysical core logs. The outstanding physical responses particularly shown from siltstone, coarse sandstone to conglomerate, and granitic gneiss in the area were effectively used as keybeds in correlating the geophysical well logs to the result of geological core logs.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.223-231
• /
• 2017

This convergence study was done to identify the effectiveness of core nursing skills improvement program on nursing skills competence in nursing students. The design of research was one group pretest-posttest and the participants were 158 nursing students. The core nursing skills improvement program was composed of 7 fundamental nursing skills(vital sign, intramuscular injection, oral medication, subcutaneous injection, enema, oxygen therapy and nelaton). The data were collected using self-report questionnaires from January 19 to 23, 2015 and analyzed using paired t-test. The mean score of nursing skills competence in posttest was significantly higher than those in pretest (t=-4.71 ~ -8.00, p<.001). The score for self-confidence(t=-11.61, p<.001) and that for problem solving skills(t=-2.04, p=.043) increased significantly after core nursing skills improvement program. The results indicate that core nursing skills improvement program was effective in improving nursing skills competence.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.3
• /
• pp.426-439
• /
• 2015

Purpose: The purpose of this study was to identify the core competencies of nursing students and to improve competency-based nursing education. Methods: A triangulation method was used. A literature review and focus group interviews (FGI) were used to identify nursing core competencies. The present level of nursing competencies of students was identified through the nursing core performance questionnaire. Results: 1) Nursing core competencies, including 23 different competencies, were categorized into seven areas through a literature review and qualitative research. These competencies included: desirable personality, attitude & interpersonal skills, professionalism, nursing knowledge & basic nursing skills, ability to cope with nursing situations, basic ability in nursing research, coping ability with changes in the healthcare environment, and leadership. 2) Core nursing skills, nursing research, and nursing leadership were the three lowest ranking competencies. Some courses in the curriculum were to be newly established in an e-learning system, student's portfolio in non-curriculum. Conclusions: Further research is needed in order to show effects of the changes. Changes after applying the strategy of a nursing education program will be measured. Continuous research in competency-based nursing education is needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.217-224
• /
• 2002

The purpose of this study was to evaluate the influence of saliva contamination on the resin bonding of the etched metal retainers. The test samples were made of Verabond, and divided into 3 groups. Retainers in group1 had normally etched metal surfaces. Retainers in group2 had normally etched metal surfaces which were saliva-contaminated for 30 seconds and cleaned with streaming, luke-warm for 1 minute and dried thoroughly. Retainers in group3 had normally etched metal surfaces which were saliva- contaminated for 30 seconds and dried thoroughly without water-cleansing. Each 3 group specimen was watched on SEM. A resin core, 5mm in diameter and 6mm in length, was made of Panavia using Teflon mold on the each specimen. These 3 groups were tested to evaluate shear bond strength, using universal testing machine. The results were as follows : 1. The shear bond strength showed no significant difference between group1 and group2. 2. The shear bond strength showed significant difference between group1 and group3. 3. The shear bond strength significant difference between group2 and group3. 4. Scanning electron microscope photographs of group1 and group2 showed no signs of contamination but of group3 showed somewhat contaminated.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.1
• /
• pp.86-96
• /
• 2000

The purpose of the study was to investigate the effects of Warming Therapy used with patients consistantly before and during surgery to on changes in their body temperatures. The data were collected from patients in a university hospital in Taegu between December 1, 1998 and May 31, 1999. The subjects were selected from patients who were hospitalized for total hip replacement surgery. Thirty participants were assigned to two groups : experimental(Warming Therapy) group and control group. Each group consisted of 15 patients. The research design was a repeated measurement design, using a nonequivalent control group. The Warming Therapy, using a forced-air warming blanket, that is a, 'Bair Hugger' was applied to subjects in the experimental group. The subjects in the group were treated with the 'Bair Hugger' to warm up the whole body for 40 minutes before surgery and upper body and face during the operation. The core temperature was measured using a tympanic thermometer. The body temperature of the patients was measured 13 times every 15 minutes during the surgery. After the operation the body temperature of the patients was measured 4 times every 15 minutes, from the time of arrivial in the recovery room to the time of leaving the recovery room. The SPSS Win 9.0 program was used for data analysis. Specific methods tested were done using ${\chi}^2-test$, t-test, repeated measures ANOVA. The findings of the study are as follows. 1. The first hypothesis, 'The level of tympanic temperature for the experimental group which received Warming Therapy will be higher than that of the control group during the operation', was supported (F=32.16, p=.000). 2. The second hypothesis, 'The level of tympanic temperature for the experimental group which received Warming Therapy will be higher than that of the control group after the operation', was supported.(F=33.36, p=.000) 3. During recovery, shivering was observed one patient in the experimental group and seven patients in the control group. In summary, the findings of the study suggest that the 'Warming Therapy' applied before and during the surgery was a very effective treatment for surgical patients in maintaining the core temperature during surgery

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.1
• /
• pp.13-26
• /
• 2024

Objectives: The aim of this study was to perform a comparative analysis of the ultrastructural and chemical composition of sialoliths, tonsilloliths, and antroliths and to describe their growth pattern. Materials and Methods: We obtained 19 specimens from 18 patients and classified the specimens into three groups: sialolith (A), tonsillolith (B), and antrolith (C). The peripheral, middle, and core regions of the specimens were examined in detail by histology, micro-computed tomography (micro-CT), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, and transmission electron microscopy (TEM). Results: In the micro-CT, group A showed alternating radiodense and radiolucent layers, while group B had a homogeneous structure. Group C specimens revealed a compact homogeneous structure. Histopathologically, group A showed a laminated, teardrop-shaped, globular structure. Group B demonstrated degrees of immature calcification of organic and inorganic materials. In group C, the lesion was not encapsulated and showed a homogeneous lamellar bone structure. SEM revealed that group A showed distinct three layers: a peripheral multilayer zone, intermediate compact zone, and the central nidus area; groups B and C did not show these layers. The main elemental components of sialoliths were O, C, Ca, N, Cu, P, Zn, Si, Zr, F, Na, and Mg. In group B, a small amount of Fe was found in the peripheral region. Group C had a shorter component list: Ca, C, O, P, F, N, Si, Na, and Mg. TEM analysis of group A showed globular structures undergoing intra-vesicular calcification. In group B, bacteria were present in the middle layer. In the outer layer of the group C antrolith, an osteoblastic rimming was observed. Conclusion: Sialoliths had distinct three layers: a peripheral multilayer zone, an intermediate compact zone and the central nidus area, while the tonsillolith and antrolith specimens lacked distinct layers and a core.

• Journal of International Academy of Physical Therapy Research
• /
• v.12 no.2
• /
• pp.2331-2337
• /
• 2021

Background: More women than men experience genu recurvatum, which can lead to knee pain and arthritis if left unattended. Pilates combined with taping is a suitable rehabilitation method for women with genu recurvatum. Objectives: To aimed the effect of taping and Pilates stabilization exercise on physical alignment and improvement of genu recurvatum in women with genu recurvatum. Design: A Randomized controlled trial. Methods: Twenty-one women were divided into three groups: taping group (back of knee taping and quadriceps femoris taping, n=7), Pilates exercise group (hip, knee and abdominal muscles exercise, n=7), and combined group (taping with pilates exercise, n=7). The measured variables were sagittal plane alignment and back and abdominal muscle, knee flexor and extensor strength. Results: After the intervention, all sagittal plane alignments were significantly improved in both the Pilates and combined groups. Sagittal plane alignment was significantly improved in the combined group compared with the taping group. Back and abdominal muscle strength were significantly improved in the Pilates and combined groups compared with the taping group. Knee flexor and extensor were significantly improved in the combined group compared with the Pilates group and in the Pilates group compared with the taping group. Conclusion: Pilates exercise with taping or Pilates exercise alone was effective intervention methods to improve physical alignment and strength in women with genu recurvatum.

• Journal of the Korean Chemical Society
• /
• v.62 no.1
• /
• pp.68-72
• /
• 2018