• 제목/요약/키워드: copper database

검색결과 26건 처리시간 0.019초

한국인 상용 식품의 구리영양가표작성과 식이섭취 및 혈청분석에 의한 한국농촌성인의 구리영양상태 평가 (Preparation of Copper Database of Korean Foods and Copper Nutritional Status of Korean Adults Living in Rural Area Assessed by Dietary Intake and Serum Analysis)

  • 정효지
    • Journal of Nutrition and Health
    • /
    • 제32권3호
    • /
    • pp.296-306
    • /
    • 1999
  • This study was carried out to prepare a copper database of Korean foods which can be used in calculating copper intake from dietary data, and to evaluate the copper nutritional status of Koran adults living in rural areas by dietary intake and serum copper concentrations. A copper database for 1,176 Korean foods was constructed (1) by analysing 112 Korean foods which are frequently consumed by Korean adults living in rural areas, (2) by adapting values form food composition databases from other countries-320 items from the University of Minnesota database, 201 items from the USAD database, and 25 items from U.K. database, and (3) by imputing values from similar foods for 518 food items. Copper intake of 2,034 Korean adults over the age of 30 living in Yeonchongun was Kyunggi province, Korea was estimated by 24-hour recall method. Mean daily copper intake of subjects was 0.98mg. Mean daily intake level of males was 1.11mg which was significantly higher than that of females, 0.88mg. There was a significant difference in the distribution of subjects by the level of copper intake and sex(p<0.05). Mean serum copper concentration was 14.8umol/1 and the percentage of subjects with low, adequate, and high levels of copper concentration were 23.9%, 69.4%, and 6.6%, respectively. The two food groups which contributed most to the dietary copper intake of subjects were cereals and grain products, and vegetables, supplying 46.2% and 12.7% of total copper intake, respectively. Individuallym, rice contributed most, suppling 31% of total copper intake, followed by soybean curd, starch vermicle, barley, etc. Plant foods contributed to 82.1% of the total copper intake. In summary, results of this study show that copper intake of Korean adults living in rural areas is low, and that dietary sources of copper are mainly plant foods. Serum levels of copper in the subjects were relatively normal. The copper database for Korean foods constructed in present study will be a valuable tool for the as-yet limited assessment of copper intake of Koreans. Such studies will contribute to the establishment of a dietary of a dietary allowance of copper and the relationship of copper nutriture and chronic diseases in Koreans.

  • PDF

일부 여대생의 구리와 아연 영양상태 평가 (Evaluation of Zinc and Copper Status in Korean College Women)

  • 김정혜
    • Journal of Nutrition and Health
    • /
    • 제32권3호
    • /
    • pp.277-286
    • /
    • 1999
  • This study was conducted to assess dietary intake and nutritional status of zinc and copper in Korean college women. Dietary survey was conducted by 24-hour recall method and fasting serum samples were collected from 111 apparently healthy subjects. Intake levels of zinc and copper were calculated using newly developed database for Zn & Cu of Korea food. Serum levels of Zn, Cu and activities of ALP, EC-SOD were measured from fasting serum sample. Mean daily zinc and copper intakes were 6.72mg/day(56.0% RDA) and 1.11mg/day respectively. Mean values of serum ALP activity, zinc and copper concentration were 43.9U/L, 14.8umol/1, 15.5umol/1and these values were mostly within normal range. EC-SOD activitis of the subjects were low and had no correlation with intake or serum levels of Zn, Cu. In conclusion, these results show that zinc and copper intake of Koran college women are lower than those from other counties but higher than those of adults in rural area of Korea. Their serum levels of Zn, Cu, ALP are relatively normal. These results indicate that marginal deficiency of Zn and Cu may be quite prevalent in these subjects but serum indicators measured may not be sensitive enough to detect such marginal deficiency. Further study in needed to develop a biochemical index sensitive enough to evaluate Zn and Cu status.

  • PDF

1D-Coordination Polymer Formed by Structural Conversion of an Oxazolidine Ligand in Reaction with the Copper(II) Halides

  • Mardani, Zahra;Golsanamlou, Vali;Jabbarzadeh, Zahra;Moeini, Keyvan;Carpenter-Warren, Cameron;Slawin, Alexandra M.Z.;Woollins, J. Derek
    • 대한화학회지
    • /
    • 제62권5호
    • /
    • pp.372-376
    • /
    • 2018
  • A 1D-coordination polymer of $1D-\{Cu({\mu}-picolinato)_2\}$ $\{Hakimi,\;2012\;\sharp73\}_n$ (1), was prepared by the reactions between 2-(2-(pyridin-2-yl)oxazolidin-3-yl)ethanol (AEPC) ligand and $CuCl_2$ or $CuBr_2$. The product was characterized by elemental analysis, UV-Vis, FT-IR spectroscopy and single-crystal X-ray diffraction. The X-ray analysis results revealed that the AEPC ligand, after reactions with the copper(II) chloride or bromide, gives the same product - $1D-\{Cu({\mu}-picolinato)_2\}_n$ (1). The coordination modes for various picolinate-based ligands were extracted from the Cambridge Structural Database (CSD). In the crystal structure of 1, the copper atom has a $CuN_2O_4$ environment and octahedral geometry, which is distorted by elongation of the axial bond lengths due to the Jahn-Teller effect.

Comparative Genomics Platform and Phylogenetic Analysis of Fungal Laccases and Multi-Copper Oxidases

  • Wu, Jiayao;Choi, Jaeyoung;Asiegbu, Fred O.;Lee, Yong-Hwan
    • Mycobiology
    • /
    • 제48권5호
    • /
    • pp.373-382
    • /
    • 2020
  • Laccases (EC 1.10.3.2), a group of multi-copper oxidases (MCOs), play multiple biological functions and widely exist in many species. Fungal laccases have been extensively studied for their industrial applications, however, there was no database specially focused on fungal laccases. To provide a comparative genomics platform for fungal laccases, we have developed a comparative genomics platform for laccases and MCOs (http://laccase.riceblast.snu.ac. kr/). Based on protein domain profiles of characterized sequences, 3,571 laccases were predicted from 690 genomes including 253 fungi. The number of putative laccases and their properties exhibited dynamic distribution across the taxonomy. A total of 505 laccases from 68 genomes were selected and subjected to phylogenetic analysis. As a result, four clades comprised of nine subclades were phylogenetically grouped by their putative functions and analyzed at the sequence level. Our work would provide a workbench for putative laccases mainly focused on the fungal kingdom as well as a new perspective in the identification and classification of putative laccases and MCOs.

인버터 스폿용접기의 용접품질 향상을 위한 동저항 데이터베이스 구축 (Implementation of Dynamic Resistance Database for Weld Quality Improvement of Inverter Spot Welder)

  • 김재문;원충연;최규하;김규식;목형수
    • 전력전자학회논문지
    • /
    • 제4권3호
    • /
    • pp.294-303
    • /
    • 1999
  • 저항 스폿용접은 외관상 말끔하게 용접되고 단시간 용접이 이루어지기 때문에 고품질 용접을 요구하는 제품에 많이 사용되고 있다. 그러나 시편의 동저항 특성을 고려하지 않아 용접중의 스패터가 발생하여 용접품질의 저하를 초래하고 있다. 본 논문는 용접품질 향상의 관점에서 동저항 데이터베이스 구축에 대하여 연구하였다. 구리 위에 주석과 납을 합금한 시편인 경우와 단일 성분인 철에 대해서 다른 용접조건에서 얻어지는 동저항을 비교하여 용접된 시편의 인장강도와 동저항의 관계를 고찰하였다.

  • PDF

The Characteristics of Arc Scattering and Fusing Current of Copper Wire in the Fault Process DB System of Cables in a PL Environment

  • Kim, Young-Seok;Shong, Kil-Mok;Kim, Sun-Gu
    • 조명전기설비학회논문지
    • /
    • 제22권3호
    • /
    • pp.52-58
    • /
    • 2008
  • The importance of. identifying the causes of electrical faults cannot be overstated because of the accidents caused by over-current that take place at the home, the office and electrical facilities due to misuse, poor products and system faults. It is necessary to gather objective, scientific data pertaining to electrical fault investigation in a product liability(PL) environment. To date, no database(DB) has been built concerning the accurate cause analysis of faultyfacilities. In this paper, accident hazard and arc scattering when over-current flows in copper wire was investigated. It was found that when over-current flows in a copper wire, the copper wire became heated and bent and beads were scattered around the wire with a flash. It was determinedthat the fusing current and time was related to the current rise per second. For example, when the current rise per second was largethe fusing current was higher than when the current rise per second was small, and the beads dispersed along a wide area. Fusing time, however, was shorter. The possibility of electrical fault became highest when the fusing current was higher. As the current rise per second is short, the dendrite structure is distributed in the surface of the copper wire. These experimental results can be utilized for a fault process DB system in the investigation and the prevention of electrical faults.

일부 학령기 아동의 구리 섭취량 및 구리 영양 상태에 관한 연구: 충남 벽지농촌과 도시간의 비교 (Dietary Copper Intakes and Nutritional Status of Copper in Serum among Elementary Schoolchildren in Chungnam Province in Korea: Comparison between Remote Rural and Urban Areas)

  • 김선효
    • Journal of Nutrition and Health
    • /
    • 제39권4호
    • /
    • pp.381-391
    • /
    • 2006
  • This study is performed to compare the dietary intakes and food sources of copper (Cu) using the database of Cu content developed in this study between the elementary schoolchildren in remote rural areas (RA, n=58, $9.9{\pm}1.7$ yrs) and those in urban area (UA, n=60, $9.4{\pm}1.8$ yrs), and to analyze the relationship between serum Cu concentration and serum antioxidant status in the RA. The results obtained in this study were as followings: 1) Dietary intakes of calorie, calcium and iron in the RA were in the 3/5-4/5 of the Korean RDA while the UA were similar to or more than the Korean RDA, 7th ed. except iron. 2) More than 273 kinds of food consumed by the subjects were analyzed the content of Cu and database of Cu content were developed in the present study. The mean dietary intake of Cu per day in the RA was $0.99{\pm}0.07mg/d$ ($170.0{\pm}13.2%$ of the USA RDA) while it was $1.22{\pm}0.07mg/d$ ($203.4{\pm}13.1%$ of the RDA) in the UA. The percentage of dietary intakes of Cu less than 213 of the RDA was 8.6% in the RA in comparison to 0% in the UA. 3) The RA and the UA consumed more than 80% of total dietary intakes of Cu from plant foods. Thus, the RA and the UA consumed Cu from cooked rice, vegetables and fruits as a major source. However the RA had less Cu from meat and their products than did the UA (p<0.05) .4) Crab stew including crab and juice was the highest food source of Cu for the total subjects, followed by seasoned bud of aralia, cooked; beef rib meat, roasted; soybean paste soup w/mallow; and soybean paste soup w/mallow & beef. Major food source of Cu was similar for the RA and the UA such as cooked rice, vegetables and fruits. 5) Mean concentration of serum Cu in the RA was $18.1{\pm}0.7{\mu}M/L$ that was in the normal value, and all subjects in this group were in more than normal value. In the RA serum Cu concentration related positively with serum ceruloplasmin concentration, serum vitamin C concentration and EC SOD activity, respectively. However, serum Cu concentration did not relate with serum TBARS concentration in the RA. Above results showed that the RA had good status of Cu nutrition based upon dietary intake and serum concentration, however some of the RA had lower intake of Cu than the RDA. The overall children in the UA had good Cu nutrition. Therefore, the subgroup of the RA should be supported to improve their Cu nutrition, and this support could give them better antioxidant status based upon positive relationship between serum Cu concentration and serum antioxidant status in the RA.

RF 정합 특성 개선을 위한 챔버의 임피던스 측정법 (Measurement Technology of Chamber Impedance for RF Matching)

  • 설용태;이의용;박성진
    • 반도체디스플레이기술학회지
    • /
    • 제2권4호
    • /
    • pp.13-17
    • /
    • 2003
  • An adaptor is designed for chamber impedance measurement of plasma process. Copper rod, fixed board and compensation circuit are the major components of the adaptor. An adaptor can be to measure chamber impedance on time unless stopping a process and Data to measure can do the database. We can use it to a criteria data for a failure diagnosis. So developed adaptor could be used for diagnosis the plasma process chamber in semiconductor industry.

  • PDF

Relationship between Mn Nodule Abundance and Other Geological Factors in the Northeastern Pacific: Application of GIS and Probability Method

  • Ko, Young-Tak;Lee, Sa-Ro;Kim, Jong-Uk;Kim, Ki-Hyune;Jung, Mee-Sook
    • Ocean Science Journal
    • /
    • 제41권3호
    • /
    • pp.149-161
    • /
    • 2006
  • The aims of this study are 1) to construct a database using geostatistics and Geographic Information System (GIS), and 2) to derive the spatial relationships between manganese nodule abundance and other geological factors such as metal grade, slope, water depth, topography, and acoustic characteristics of the sub-bottom. Using GIS, it is possible to analyze a large amount of data efficiently, and to maximize the practical application, to increase specialization, and to enhance the accuracy of the analyses. The greater the copper and nickel grade, the higher the rating. The distribution pattern of nickel grade is similar to that of copper grade. The slopes are generally less than $3^{\circ}$ except for seamounts and cliff areas. The rating shows no correlation with slope. The rating is highest for slopes between 2.5 and $3.5^{\circ}$ in block N1 and between 4.0 and $4.5^{\circ}$ in block N3. The topography is classified into five groups: seamount, hill crest, hill slant, hill base or plain, and seafloor basin or valley. The rating proves lowest for seamount and hill crest. Our results show that the rating increases with the water depth in the study area. Nodule abundance dose not show any significant relationship with the thickness of the upper transparent layer in the study area.

RFID를 이용한 공원관리 자동화 시스템 개발 연구 (Development of Theme Park Management Automation System Using RFID)

  • 이양원
    • 한국정보통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.871-876
    • /
    • 2005
  • 본 논문에서는 유비쿼터스 센서 네트워크의 핵심인 RFID에 대한 응용기술을 개발하기 위하여 대상을 놀이공원으로 잡고, 공원에 출입하는 입장객들이 각 놀이 기구에 입장한 시간과 나가는 시간을 자동으로 입력 받아서 데이터베이스에 저장한 후에 전체적인 놀이공원 인원 배치에 관한 합리적인 지시, 명령을 도출하도록 하는 프로그램을 개발하는 시스템을 개발하였다. 이를 위하여 본 논문에서는 13.25Mhz 대의 RFID 센서와 마이크로소프트사의 MSSQL 데이터베이스와 IIS 웹서버를 기반으로 하는 시스템 구축을 수행하였다. 이를 위하여 SkyeTek사의 RFID 리더를 기반으로 시스템을 구축하여 호스트 PC와 연동 프로그램을 C++ 언어를 이용하여 개발하였고, ASP.NET과 $C\#$을 이용한 웹사이트 구축하였으며, RFID 리더의 태그 인식 범위를 확장하기 위한 외장형 안테나를 제작한 $30\~40$ cm 수준의 인식 거리를 보장하는 동판형 안테나를 개발하였으며, 시스템에 적용한 결과 성능의 우수함을 확인하였다.