• 충청수학회지
• /
• 제5권1호
• /
• pp.173-183
• /
• 1992

In this paper, we introduce the notion of the weakly 2-convergence and strongly 2-convergence for 2-metric spaces. And we investigate its properties and prove the closedness and convexity of T(z,y, z).

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.347-351
• /
• 1995

We define a fuzzy regular modification and fuzzy regular series. And we investigate some properties of fuzzy regular modification with respect to fuzzy initial convergence structure

• 충청수학회지
• /
• 제23권2호
• /
• pp.391-399
• /
• 2010

In this paper, we introduce the notions of the fuzzy statistical convergence of sequences, the fuzzy statistical Cauchy sequence on a fuzzy normed linear space. And we investigate some properties of the related completeness.

• 축산식품과학과 산업
• /
• 제12권2호
• /
• pp.17-25
• /
• 2023

• Composites Research
• /
• 제31권2호
• /
• pp.51-56
• /
• 2018

종이에 연필을 이용하여 선을 그리는 연필 선 종이 센서(pencil drawing paper sensor, PDPS)를 센서로 활용하기 위한 연구를 수행하였다. PDPS의 특성에 기반을 두는 3가지 다른 종이에 대한 감지 효과를 비교하였다. 시편은 4B 연필을 평지(A4), 화선지, 한지에 선을 그어 제작하였으며 구리선과 연필 선간의 전기 접점을 향상시키기 위해 실버 페이스트를 사용하였다. FT-IR 스펙트럼 분석으로 PDPS에 대한 3 종이의 화학적 구조가 유사하고 광학현미경으로 각 종이의 조밀도를 비교하였다. 3 종이의 인장 강도의 통계적 평가로부터, A4가 PDPS에 가장 적합하다는 것을 확인하였다. 선을 그린 횟수에 따른 종이의 두께 변화를 통해 그리는 횟수의 최적 조건을 확인하였으며 복합재료의 반복 압축 실험을 통해 압축력의 변화를 PDPS로 관측하였다. PDPS를 이용하여 복합재료의 기계적 물성을 비교적 예측할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.55-55
• /
• 2015

Today, engineers are facing new set of challenges that are quite different from the conventional ones. Information technologies are rapidly commoditizing while the paths beyond the current roadmaps became uncertain as various technologies have been pushed to their limits. Along with these changes in IT ecosystems, grand challenges such as global security, health, sustainability, and energy increasingly require trans-disciplinary solutions that go beyond the traditional arenas in STEM (Science, Technology, Engineering and Mathematics). Addressing these needs is shifting engineering education and research to a new paradigm where the emphasis is placed on the consilience for holistic and system level understanding and the convergence of technology with AHSD (arts, humanities, social science, and design). At the center of this evolutionary convergence, nanotechnologies are enabling novel functionalities such as bio-compatibility, flexibility, low power, and sustainability while on a mission to meet scalability and low cost for smart electronics, u-health, sensing networks, and self-sustainable energy systems. This talk introduces the efforts of convergence based on the emerging nano technology tool sets in the newly launched School of Integrated Technology and the Yonsei Institute of Convergence Technology at Yonsei International Campus. While the conventional devices have largely depended upon the inherent material properties, the newer devices are enabled by nanoscale dimensions and structures in increasingly standardized and scalable fabrication platform. Localized surface plasmon resonance in 0 dimensional nano particles and structures leads to subwavelength confinement and enhanced near-field interactions enabling novel field of metal photonics for sensing and integrated photonic applications [1,2]. Unique properties offered by 1 dimensional nanowires and 2 dimensional materials and structures can enable novel electronic, photonic, nano-bio, and biomimetic applications [3-5]. These novel functionalities offered by the emerging nanotechnologies are continuously finding pathways to be part of smart systems to improve the overall quality of life.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.117-123
• /
• 2018

Recently, aqueous method has attracted lots of attention because it enables the solution-processed metal oxide thin film with high electrical properties in low temperature fabrication condition to various flexible devices. Focusing the development of aqueous route, many researchers are only focused on metal oxide materials. However, for expansive application of the aqueous-based metal oxide films, the systematic study of performance change with process variables for the development of aqueous-based metal oxide insulator film is urgently required. Here, we propose importance of process variables to achieve high electrical-performance metal oxide insulator based on the aqueous method. We found that the significant process variables including precursor solution temperature and humidity during the spincoating process strongly affect chemical, physical, and electrical properties of $AlO_x$ insulators. Through the optimization of significant variables in process, an $AlO_x$ insulator with a leakage current value approximately $10^5$ times smaller and a breakdown voltage value approximately 2-3 times greater than un-optimized $AlO_x$ was realized. Finally, by introducing the optimized $AlO_x$ insulators to solutionprocessed $InO_x$ TFTs, we successfully achieved $InO_x/AlO_x$ TFTs with remarkably high average field-effect mobility of ${\sim}52cm^2V^{-1}\;s^{-1}$ and on/off current ratio of 106 at fabrication temperature of $250^{\circ}C$.

• 한국산업융합학회 논문집
• /
• 제17권1호
• /
• pp.1-6
• /
• 2014

Styrene-butadiene-styrene copolymer(SBS)/Clay nanocomposites were prepared by melt mixing method with organic clay modified with dimethyl dihydrogenated-tallow amine(Cloisite 15A) and methyl tallow bis (2-hydroxy-ethyl) amine(Cloisite 30A), respectively. From the results of XRD, we found that mono layered silicates were dispersed in SBS matrix and they were exfoliated nanocomposites. Mechanical properties of exfoliated SBS nanocomposites were more improvedl than those of SBS. Especially, it was found that the addition of small amount of organoclay was enough to improve mechanical properties without increasing hardness.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.337-341
• /
• 2006

The tensile properties of Poly(trimethylene terephthalate, PTT) $1{\times}1Rib$ knitted fabrics were experimentally studies, and the specimens has $1{\times}1$ rib stitched structure which are weft knitted fabrics with various lengths of loop. The $1{\times}1$ rib weft knitted fabric showed larger tensile linearity, tensile energy and tensile resilience in the direction of courses. The tensile properties increased with increasing the loop density in all directions, and perfectly increased with the course directions than the wale directions.