• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.102-117
• /
• 1999

Vertical distribution of squids in relation to oceanographic structure was analyzed on the basis of experimental squid hand jigging fishing by R/V Pusan 851 in the area of 34°∼47° N, 150° E∼170°W in the North Pacific in summer from 1987 through 1993 with exception of 1991. The 6 species of squids showed different patterns of vertical and horizontal distribution as following; Boreopacific gonate squid (Gonatopsis borealis) were mainly caught in the layer of 71-80m fishing depth of the Subarctic Domain with water temperature of 6∼11℃ and salinity of 32.2∼33.6‰ and distributed in the latitudes of 41°∼43° N. Boreal clubhook squid (Onychoteuthis borealijaponica) were mainly caught in the layer of 11∼20m fishing depth of the Subarctic Domain with water temperature of 10∼12℃ and salinity of 32.9∼33.6‰ and distributed in the latitudes of 41°∼42N°. Tapanese flying squid (Todarodes pacificus) were mainly caught in the layer of 11∼20m fishing depth of the Transition Zone and the Subtropical Domain with water temperature of 15∼18℃ and salinity of 33.6∼34.0‰ and distributed in the latitudes of 40°∼42°N. Neon flying squid (Ommastrephes bartrami) were mainly caught in the layer of surface∼10m fishing depth of the Subarctic Convergence Zone and the Transition Zone with water temperature of 16∼17℃ and salinity of 33.7∼34.4‰ and distributed in the latitudes of 39 °∼41°N. Luminous flying squid (Symplectoteuthis luminosa) were mainly caught in the layer of 11 20m fishing depth of the Transition Zone and the Subtropical Domain with water temperature of 18∼20℃ and salinity of 33.8∼34.6‰ and distributed in the latitudes of 37°∼39°N. Purpleback flying squid (Symplectoteuthis oualaniensis) were mainly caught in the layer of surface∼10m fishing depth of the Subtropical Domain with water temperature of 24∼25℃ and salinity of 34.2∼34.4‰ and distributed in the latitude of 36°∼37°N.

• Korean Journal of Ecology and Environment
• /
• v.51 no.4
• /
• pp.259-267
• /
• 2018

This study was conducted to confirm phenological response of main deciduous woody species in Korea according to elevated temperature. Based on seeds collected from the same place, 39 woody species were cultivated in field (control) and in greenhouse (treatment) that was maintained above base temperature ($4.8^{\circ}C$). And then, we observed phenotype change of leaves focused on phenological response and explained relation with their current distribution area. As a result, initiation period of leaves unfolding was 1st~3rd, May in control. It was 13, December~7, January in treatment. Period of leaves yellowing was 11~26, October in control. It was 30, October~13, November in treatment. Consequently, initiation period of leaves unfolding was faster by 119~140 days and period of leaves yellowing was slower by 3~32 days since elevated temperature. Period of leaves growth increased in treatment by 148 days than control. Quercus mongolica and Quercus serrata that cultivated in treatment was changed as evergreen trees which have grown up continuely during one year. Also, initiation period of leaves unfolding of Sorbus alnifolia in treatment was faster than in control. However, difference of the period between control and treatment was smallest. Because period of yellowing leaves was moved ahead. Phenological response of leaves according to elevated temperature had no relation of type of their current distribution area. This is the result of acclimation due to elevated temperature during the winter and suggests that the phenotype of leaves of 39 deciduous woody species is more sensitive to the current growth condition than to the past growth condition.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.3
• /
• pp.225-232
• /
• 2021

This study sought to investigate the distribution, antimicrobial resistance rate, and bacterial co-infection frequency of non-tuberculous mycobacteria (NTM) in a single center in Incheon, South Korea. A total of 8,258 specimens submitted for tuberculosis (TB)/NTM real-time PCR tests during the years 2015 to 2020 were retrospectively reviewed. In total, 296 specimens (3.6%) were NTM positive, and the positivity increased from 2.5% (30/1,209) in 2015 to 3.8% (66/1,740) in 2020. Of 296 NTM specimens, 54.7% (162/296) were identified as the Mycobacterium avium complex (MAC) followed by the Mycobacterium abscessus complex (MABC) 20.9% (62/296), M. fortuitum 6.4% (19/296) and M. flavescens 3.4% (10/296). Of the NTM-positive specimens, 76.7% (227/296) were tested for drug resistance. The results showed multidrug-resistant NTM in 40.1% (91/227) and extensively drug-resistant NTM in 59.9% (136/227) of these specimens. Of the 145 isolates taken for bacterial culture, bacteria/fungi co-infection with NTM accounted for 43.4% (63/145), in which the most common bacterial species was Klebsiella pneumonia (23.8%, 15/63). This study is the first report on the distribution and antimicrobial resistance of NTM in Incheon. As the proportion of NTM infections increases, active treatment and thorough infection control are required for effective management.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.732-743
• /
• 2005

The characteristics of precipitation over South Korea from 1973 to 2002 were investigated. The synoptic patterns inducing precipitation are classified by 10 categories, according to the associated surface map analysis. The annual mean frequency of the total precipitation, its duration time and amount for 30 years are 179 times, 2.9 hours, and 7.1 mm, respectively. About $59\%$ of the total precipitation events were associated with a synoptic low. The dominant patterns are identified with respect to seasons: A synoptic mobile low pressure pattern is frequent in spring, fall, and winter, whereas low pressure embedded within the Changma and orography induced precipitation are dominant in summer and in winter. For the amount of precipitation, precipitation originated from tropical air associated with typhoon, tropical convergence, and Changma is more significant than that with other pressure patterns. The statistical elapse time reaching to 80 mm, which is the threshold amount of heavy rainfall watch at KMA, takes 12.9 hours after the onset of precipitation. The probability distribution function of the precipitation shows that the maximum probability for heavy rainfall is located at the south-coastal region of the Korean peninsula. It is also shown that the geographical distribution of the Korean peninsula plays an important role in occurrence of heavy rainfall. For example, heavy precipitation is frequently occurred at Youngdong area, when typhoon passes along the coastal region of the back borne mountains in the peninsula. The climatological classification of synoptic patterns associated with heavy rainfall over South Korea can be used to provide a guidance to operational forecast of heavy rainfall in KMA.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• Korean Journal of Acupuncture
• /
• v.31 no.2
• /
• pp.66-78
• /
• 2014

Objectives : The specificity of acupuncture point has been a highly controversial subject. Existing researches said that ion-distribution differences are observed on the acupuncture point. This study was conducted under the assumption that multiple ionic changes induced by muscle fatigue would be different between the acupuncture point with non-acupuncture point. Methods : To induce the identical fatigue, twenty subjects performed the knee extension/flexion exercise using the Biodex System 3. ST32 and ST33 as well as adjacent non-acupuncture points were selected. We measured blood lactate and analyzed the median frequency(MF) and peak torque. To obtain the information on the extracellular fluid(ECW), intracellular fluid(ICW) and cell membrane indirectly, we used the multi-frequency bioelectrical impedance analysis(MF-BIA) method. Results : MF, peak torque and blood lactate level of all measurement sites were gradually returned to normal. Re resistance of ST32 had a stronger response, but a non-acupuncture point adjacent to ST33 had a larger response up to 20 minutes post exercise. Ri resistances were similar for both acupoints and non-acupoints. The $C_m$ capacitance of ST32 had a stronger response after inducing fatigue, but ST33 had a smaller response than a non-acupuncture point adjacent to it. Conclusions : In comparison with before and after inducing fatigue, the specificity of acupuncture points was not clearly observed. Hence, we concluded that the body composition factors extraction method had the limitation as a method of finding the specificity of acupuncture points by inducing fatigue.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.137-151
• /
• 2011

This dissertation aims to empirically analyze the effect of cultivation of software industry on the local economy through Inter-regional Software Input-Output Analysis. The temporal range of analysis of effect of software industry on the local economy shall be for the year 2005 since analysis is made on the basis of the Regional Industrial Input-Output Table published by the Bank of Korea in 2005, and spatial domain shall be limited to the 16 metropolitan cities and provinces, which are the standards for each administrative zone. Results of analysis of this dissertation are as follows. Firstly, average inverse matrix coefficient of software industry for each region was computed to be 1.6248, which is lower than the average inverse matrix coefficient of 1.7979 for the entire industries. Secondly, among these, inverse matrix coefficient of software industry for each region on other industry within the same region was 0.1794, which is higher than that of entire industries at 0.1382. However, average inverse matrix coefficients of software industry for each region on self-industry within the same region and entire industries in other regions were found to be 1.0119 and 0.4335, respectively, which is lower than those of entire industries at 1.0982 and 0.5616, respectively. Thirdly, domestic produces induced by final demand items of software industry for each region was the highest for Seoul with 17.3309 trillion Korean won, accounting for 81.0% of the total, followed by Gyeonggi with 2.3370 trillion Korean won, 10.9% of the total. Fourthly, distribution ratios of domestic produces induced by final demand items of software industry for each region were found to be 19.1%, 72.1% and 8.8% with respect to the weight of consumption, investment and export, respectively, thereby illustrating very high level of distribution ratios of domestic produces being induced by investment in comparison to the distribution ratios of domestic produces being induced for the entire industries at 47.3%, 19.8% and 32.9%, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.43-57
• /
• 2022

In this paper, we propose a method of analyzing research papers published by researchers belonging to university departments in the field of disaster & safety for the scientometric analysis of the research status in the field of disaster safety. In order to conduct analysis research, the dataset constructed in previous studies was newly improved and utilized. In detail, for research papers of authors belonging to the disaster prevention and safety engineering type department of domestic universities, institution identification, cited journal identification of references, department type classification, disaster safety type classification, researcher major information, KSIC(Korean Standard Industrial Classification) mapping information was reflected in the experimental data. The proposed method has a difference from previous studies in the field of disaster & safety and data set based on related keyword searches. As a result of the analysis, the type and regional distribution of organizations belonging to the department of disaster prevention and safety engineering, the composition of co-authored department types, the researchers' majors, the status of disaster safety types and standard industry classification, the status of citations in academic journals, and major keywords were identified in detail. In addition, various co-occurrence networks were created and visualized for each analysis unit to identify key connections. The research results will be used to identify and recommend major organizations and information by disaster type for the establishment of an intelligent crisis warning system. In order to provide comprehensive and constant analysis information in the future, it is necessary to expand the analysis scope and automate the identification and classification process for data set construction.

• Journal of the Economic Geographical Society of Korea
• /
• v.4 no.2
• /
• pp.57-77
• /
• 2001

The Honam region has been recognized as one of the most lagging regions in Korea. Drawing upon some decompositions oi Gross Regional Domestic Product(GRDP) per head and labor productivity, the overall trend of inequalities in Korea has been revealed and the trajectory of the Honam region's economic change has been identified by examining how the region's economic performance changed relative to that of Korea in the 1990s. There are some findings. First of all, Korea is characterized by strong divergence in the development of its region economies, in terms o\ulcorner per capita GRDP, which relies upon productivity differentials rather than differences in employment rates. Second, the Honam region has displayed poor economic performances in terms of GRDP per head except for Jeonnam. Third, the dramatic fall in cumulative population growth relative to the national average has been an important factor in the Jeonnam's overwhelming economic performance measured by per capita GRDP. Fourth, the decline in the relative productivity of the Honam region is mostly explained by falling relative regional productivity growth in construction, transport and manufacturing, although it should be noted that the latter sector has made positive contribution to raising relative regional productivity of Jeonnam. Fifth, overall the shift in employment to service sector, especially to social, personal, public, health, education, other services other than distribution, hotels, catering has tended to support relative regional productivities, along with the positive contribution being made oi agriculture, forestry and fishing to relative regional productivity growth in the Honam region.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.235-241
• /
• 2016

Among recent issues emerging in the areas related to the society, health has received the most attention. In this paper, for a patient unable to do self-care because of worsened diseases, a biological information transfer method is proposed by which the disease information can be securely managed, by attaching an implantable device into the body. Our method object of the invention is to prevent a third party from illegally intercepting and interfering with the biological information attached to the insertion device in the body. In the proposed technique to improve the safety of the patient between the hospital and physician by assigning each code to the biometric information of the patient in order to prevent a third party tapping and interfering. In addition, our method is assigned a code necessary for encoding in advance to confirm the biological information between the patient and the hospital (doctor) in a manner dividing the bio-information code. In particular, the proposed technique makes a third party unable to illegally tap or interfere in, by previously generating a code used for encoding so that it can be stored in the database of the hospital, which not only decreased hospital care time to 6.9%, but also increased work efficiency rate up to 12.7%.