• 전기학회논문지
• /
• 제59권6호
• /
• pp.1075-1082
• /
• 2010

This paper analyzes a operating characteristic for maximum power point tracking (MPPT) of photovoltaic generation system. MPPT methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. MPPT algorithm is widely used the control method such as the perturbation and observation(PO) method, incremental conductance(IC) method and constant voltage(CV) method. In case of the radiation is changed, this paper proposes a response characteristic with MPPT control algorithms. Also, it proposes the direct for a novel MPPT control algorithm development through the analyzed data, hereby proves the effectiveness of this paper.

• Advances in concrete construction
• /
• 제16권2호
• /
• pp.79-89
• /
• 2023

The occurrence of unexpected horizontal offset in the instrument or target will result in accumulated horizontal deviation in segment alignment with traditional short-line match method. A geometry control method, the four-point method, is developed for precast segmental bridges to avoid the influences of unexpected horizontal offset. The concept of the four-point method is elucidated. Furthermore, the detailed instruments and instructions are introduced. Finally, the four-point method is validated through a practical engineering application. According to the survey data, after short-line match precast construction, the vertical deviations on both sides vary between -5 mm and 5 mm in almost all segments, and the horizontal deviations vary between -4 mm and 4 mm in all segments. Without on-site adjustment, the maximum vertical and horizontal closure gaps are 12.3 and 26.1 mm, respectively. The four-point method is suggested to alleviate the issues associated with relatively poor soil conditions in casting yard.

• 대한공간정보학회지
• /
• 제22권2호
• /
• pp.17-24
• /
• 2014

본 논문에서는 지리공간 웹 서비스 기반의 기준점 자동 추출 기법을 제안한다. 제안하는 기법은 3단계로 구성된다. 1) 첫 번째 단계에서는 지리공간 웹 서비스를 통해 대상영상의 촬영지역에 해당하는 기준자료를 자동으로 획득하고, 2) 두 번째 단계에서는 획득된 기준자료와 대상영상에 SURF 알고리즘을 적용하여 후보 기준점을 찾는다. 3) 마지막 단계에서는 RANSAC 알고리즘을 이용하여 추출된 후보 기준점 중 정 정합점을 최종 기준점으로 산출한다. 제안하는 기법은 기준자료를 획득하기 위해 지리공간 웹 서비스를 활용하였다. 이를 통하여 제안하는 기법은 기준영상과 고도자료의 관리 및 획득 시 사용자 편의성을 증대 시켰고, 표준을 따르기 때문에 높은 확장성을 가진다. 본 논문에서는 제안하는 기법을 SPOT-1, SPOT-5, IKONOS 위성영상에 적용하여 실험을 수행하였다. 실험지역에 적용한 결과, 제안하는 기법은 대상영상의 촬영센서, 촬영일자, 해상도 변화에도 RMSE 5화소 미만의 일관된 정확도를 산출하였고, 대상영상의 해상도가 좋아짐에 따라 정확도의 지속적인 향상 가능성을 확인하였다. 또한 기준영상과 고도자료로 군 표준 자료를 사용함으로써 제안하는 기법의 군사적 활용가능성을 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권12호
• /
• pp.514-521
• /
• 2006

The existing ULTC operation control strategy based on the measured data deteriorates the voltage compensation capability making the efficient corresponding to the load variation difficult by following the fixed load center point voltage. Accordingly, this paper proposes a new on-line fuzzy ULTC controller based on the designed multiple load center points which can improve the voltage compensation capability of ULTC and minimize voltage deviation by moving in real-time the load center point according to the load variation to an adequate position among the multiple load center points designed using the clustering technique. The Max-Min distance technique is adopted as the clustering technique for the decision of multiple load points from measured MTr load current and PTr voltage, and the minimum distance classifier is adopted for the decision of fuzzy output membership function. To verify the effectiveness of the proposed strategy, Visual C++ MFC-based simulation environments is developed. Finally, the superiority the proposed strategy is proved by comparing the fuzzy ULTC operation control results based on multiple load center points with the existing ULTC operation control results based on fixed load center point using the data for three day.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.628-633
• /
• 2018

GNSS의 정확도는 사용되는 장비에서부터 자료처리에 이르기까지 여러 가지 요인에 의해 그 정확도가 달라진다. 이것은 GNSS에 의한 위치결정이 요구되는 정확도에 따라 다르게 활용될 수 있기 때문이다. 높은 정확도를 요구하는 기준점 측량의 경우는 상대측위 방식으로 측량을 수행하게 되며, 기준점의 등급에 따라 관측시간과 자료처리 s/w가 다르게 사용되고 있다. 그러나 학술용 s/w는 사용자의 숙련도에 따라 그 정확도가 크게 좌우될 수 있어 기선거리가 짧은 경우에는 상업용 s/w를 사용하는 것이 효율성 측면에선 더 나을 수도 있다. 이에 본 연구에서는 GNSS측량 데이터에 대해 학술용 s/w와 상업용 s/w를 이용 자료처리를 수행 그 결과를 비교하였다. 연구 결과 수평위치에서는 2cm 미만의 차이를 나타냈으며, 높이 성과에 있어서는 5cm 미만의 차이를 나타냈다. 이러한 차이는 통합기준점 측량 규정에서 명시하고 있는 오차 범위에 존재하는 것으로 나타났다. 이상의 결과를 토대로 장기선이 아닌 중단기선에서는 상업용 s/w를 활용하여 GNSS 자료처리에 사용할 수 있다는 것을 입증할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.941-955
• /
• 2015

In dual-channel networks (DCNs), all frequency hopping (FH) sequences used for data channels are chosen from the original FH sequence used for the control channel by shifting different initial phases. As the number of data channels increases, the hitting frequency point problem becomes considerably serious because DCNs is non-orthogonal synchronization network and FH sequences are non-orthogonal. The increasing severity of the hitting frequency point problem consequently reduces the resource utilization efficiency. To solve this problem, we propose a novel hitting frequency point collision avoidance method, which consists of a sequence-selection strategy called sliding correlation (SC) and a collision avoidance strategy called keeping silent on hitting frequency point (KSHF). SC is used to find the optimal phase-shifted FH sequence with the minimum number of hitting frequency points for a new data channel. The hitting frequency points and their locations in this optimal sequence are also derived for KSHF according to SC strategy. In KSHF, the transceivers transmit or receive symbol information not on the hitting frequency point, but on the next frequency point during the next FH period. Analytical and simulation results demonstrate that unlike the traditional method, the proposed method can effectively reduce the number of hitting frequency points and improve the efficiency of the code resource utilization.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.1-7
• /
• 1999

An innovative concept for a passive reactor shutdown system, so called self-actuated shutdown system(SASS), is inevitably required for the inherent safety in liquid metal reactor, which is designed with the totally different concept from the usual reactor shutdown system in LWR. SASS using Curie point electromagnet(CPEM) was selected as the passive reactor shutdown system for KALIMER (Korea Advanced Liquid MEtal Reactor). A mock-up of the SASS was designed, fabricated and tested. From the test it was confirmed that the mockup was self-actuated at the Curie point of the temperature sensing material used in the mockup. An articulated control rod was also fabricated and assembled with the CPEM to confirm that the control rod can be inserted into core even when the control rod guide tube is deformed due to earthquake. The operability of SASS in the actual sodium environment should be confirmed in the future. All the design and test data will be applied to the KALIMER design.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.642-645
• /
• 2004

This paper focuses on recovering systematic biases during LIDAR calibration, particularly using natural surfaces as control features. Many previous approaches have utilized all the points overlapping with the control features and often experienced with an inaccurate value converged with a poor rate due to wrong correspondence in pairing a point and the corresponding control features. To overcome these shortcomings, we establish a preventive scheme to select the pairs of high confidence, where the confidence value is based on the error budget associated with the point measurement and the linearity and roughness of the control feature. This approach was then applied to calibraring the LIDAR data simulated with the given systematic biases. The parameters were successfully recovered using the proposed approach with the accuracy and convergence rate superior to those using the previous approaches.

• 한국군사과학기술학회지
• /
• 제27권3호
• /
• pp.329-337
• /
• 2024

Free-space optical communication technology enables the high-speed data transmission and excellent anti-jamming security. We conduct research on satellite-to-ground free-space optical communication links for high-speed transmission of large-capacity surveillance and reconnaissance data. Since the satellite continues to move along its orbit while the optical signal is transmitted between the satellite and the ground, the pointing angle of the beam from the ground terminal needs to be corrected by Point Ahead Angle(PAA) so that the transmitted light reaches the expected location of the satellite. In this paper, we present the algorithm for PAA estimation and control.

• 한국멀티미디어학회논문지
• /
• 제23권2호
• /
• pp.155-165
• /
• 2020

In this paper, we propose a smart thermostat temperature set-point control method based on machine learning and rule engine, which controls thermostat's temperature set-point so that it can achieve energy savings as much as possible without sacrifice of occupants' comfort while users' preference usage pattern is respected. First, the proposed method periodically mines data about how user likes for heating (winter)/cooling (summer) his or her home by learning his or her usage pattern of setting temperature set-point of the thermostat during the past several weeks. Then, from this learning, the proposed method establishes a weekly schedule about temperature setting. Next, by referring to thermal comfort chart by ASHRAE, it makes rules about how to adjust temperature set-points as much as low (winter) or high (summer) while the newly adjusted temperature set-point satisfies thermal comfort zone for predicted humidity. In order to make rules work on time or events, we adopt rule engine so that it can achieve energy savings properly without sacrifice of occupants' comfort. Through experiments, it is shown that the proposed smart thermostat temperature set-point control method can achieve better energy savings while keeping human comfort compared to other conventional thermostat.