• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.78-83
• /
• 1984

Hyperstability 이론에 의한 연속시간 시스템의 제어 알고리즘을 이산시간 선형시변 시스템의 적응제어에 직접 이용하여 시스템의 설계를 간단하게 하였다. 기준인력으로서 계단함수와 램프함수를 인가하여 설계된 시스템의 동작특성을 조사해 본 결과 공정의 출력이 모델의 출력에 적응함을 알 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.

• 한국지능시스템학회논문지
• /
• 제13권3호
• /
• pp.293-299
• /
• 2003

본 논문은 인터넷 상에서 임의로 변화하는 입력지연을 갖는 불확실 퍼지 시스템의 지능형 강인 퍼지 제어기 설계를 논의한다. 임의로 변화하는 입력지연은 유한개의 상태를 갖는 마코프 확률과정으로 표현된다. 디지털 안정화기를 설계하기 위하여 연속시간 Takagi-Sugeno 퍼지 시스템을 이산화하며 제어기의 입출력단에 영차의 샘플/홀드 함수를 가정한다.이산화된 시스템은 확률적 과정에 따라 변화하는 도약 시스템으로 표현된다. 확률적 강인 안정가능성 조건은 선형 행렬 부등식의 형태로 표현된다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1271-1279
• /
• 2017

A highly accurate model-free controller is proposed for trajectory tracking control of robot manipulators. The proposed controller incorporates time-delay estimation (TDE) to estimate and cancel continuous nonlinearities of robot dynamics, and exploits fuzzy logic systems to suppress the effect of the TDE error, which is due to discontinuous nonlinearities such as friction. To this end, integral sliding mode is defined using desired error dynamics, and a Mamdani-type fuzzy inference system is constructed. As a result, the proposed controller achieves the desired error dynamics well. Implementation of the proposed controller is easy because the design of the controller is intuitive and straightforward, and calculations of the complex robot dynamics are not required. The tracking performance of the proposed controller is verified experimentally using a 3-degree of freedom PUMA-type robot manipulator.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.85-88
• /
• 2000

Distributed Control System(DCS) is one of the best solutions to implement control systems because it provides continuous observation of control process and execution of commands to induce proper operations. In this paper, a design of control network for DCS in nuclear power plant is proposed. The proposed control network on DCS has a simple architecture and deterministic property. Thus, the proposed control network offers hard real-time periodic service. It also has redundant media for the fault-tolerance. As a result, high safety and reliability required in nuclear power plant are guaranteed.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.437-443
• /
• 1987

Due to the recent development of microprocessor, the digital control is now in use for the practical structure of the control systems, but it leaves the problem of controlling delays caused by computation time when it is applied to the realization problems, such as application method of the control law and controlling effect of continuous control, etc. This paper deals with robust stability of the digital regulator which compensates for the controlling delays by applying prediction values of state.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.456-459
• /
• 1993

CADET is used to analyze the performance of the missile. Miss distance is calculated for a given lateral fin force saturation level due to the aerodynamic characteristics, target acceleration, and glint and fading noises which is assumed as Gaussian noises. As .alpha.-.betha. filter is studied to attenuate the noises, the results are compared with those of without filter. For the easy simulation, the transfer function of a discrete .alpha.-.betha. filter is converted into the continuous model. Simulation results show that the results of CADET simulation is similar to those of Monte-Carlo simulation. Moreover CADET is the better in computing time demand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.62-65
• /
• 1989

Optimizing transient response for both tracking reference signals and disturbance rejection is determined by the poles and zeros of the transfer function. Thus, optimal pole assignment and how should weighting matrix for the performance index be chosen is very important to achieve optimum transient response. This paper focus its attention on the choosing and analysis of weighting matrix for optimum pole assignment. Optimum pole assignment is defined for linear time-invariant continuous systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.407-410
• /
• 1989

Optimizing transient response for both tracking reference signals and disturbance rejection is determined by the poles and zeros of the transfer function. Thus, optimal pole assignment and how should weighting matrix for the performance index be chosen is very important to achieve optimum transient response. This paper focus its attention on the choosing and analysis of weighting matrix for optimum pole assignment. Optimum pole assignment is defined for linear time-invariant continuous systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.490-492
• /
• 2005

Unattended continuous containment/surveillance systems for safeguards of nuclear facility result in large amounts of image and radiation data, which require much time and effort to inspect. Therefore, it is necessary to develop system that automatically pinpoints and diagnoses the anomalies from data. In this regards, this paper presents the nuclear material containment/surveillance system that integrates visual image and radiation data.