• 융합신호처리학회논문지
• /
• 제4권4호
• /
• pp.47-51
• /
• 2003

디지털제어에 잘 사용되어 온 유한정정제어를 연속계에 적용하기는 연속계의 점근성 때문에 어려운 것으로 알려져 있다. 그러나 유한 Laplace변환을 전달함수에 적용하고 여기에 정정조건을 적용하여 제어기를 설계한 연속계 유한정정제어기(CDBC, Continuous-time Deadbeat Controller)에 대해서 연구가 되고 있다. 이에 따라 지연요소가 전달함수에 사용되어 정정을 위한 차수 및 보간조건이 유도되어 제어기가 설계되거나, 디지털 유한정정제어기를 설계하고 이를 연속계 제어기로 변환하기 위해 평활요소로 사용하여 CDBC를 구성하기도 한다. 본 논문에서는 다중 샘플링을 적용하여 제어기와 출력귀환루프의 샘플링 속도를 달리하였으며, 2차 평활요소를 디지털 유한정정제어기에 사용한 CDBC를 연구한다. 이러한 다중 샘플링은 샘플링 주기 동안에 제어루프를 또 샘플링하여 전체적인 출력응답을 개선할 수 있다. 제어기는 직렬 적분 보상기를 전향경로에 배치하고 지역 귀환보상기를 귀환 루프에 도입한다. Matlab Simulink을 사용하여 시뮬레이션을 한다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.285-290
• /
• 2004

이동 객체의 계속적인 위치 변화로 인해 일정 시간동안 동일한 질의를 계속적으로 수행하는 연속 질의에 대한 필요성이 증가되고 있다. 이러한 연속 질의는 계속적인 이동 객체의 위치 변화에 따라 서버에서 계속적인 질의 처리를 수행하기 때문에 많은 질의 처리비용을 소요할 뿐만 아니라 서버 및 네트워크에 많은 부하를 초래할 수 있다. 본 논문에서는 연속 질의의 하나인 연속 범위 질의를 효과적으로 수행하기 위한 질의 처리 기법을 제안한다. 제안하는 질의 처리 기법은 상호 이동 중인 이동 객체에 대한 연속 질의 처리를 수행하기 위해 질의에 대한 응답의 유효성과 질의 결과를 미리 예측한다. 또한, 객체의 동적 변화에 따른 질의 처리를 효과적으로 수행할 수 있도록 한다.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.193-204
• /
• 2019

This paper presents results from experimental and numerical studies on the response of steel-concrete composite box bridge girders under certain localized fire exposure conditions. Two composite box bridge girders, a simply supported girder and a continuous girder respectively, were tested under simultaneous loading and fire exposure. The simply supported girder was exposed to fire over 40% of its span length in the middle zone, and the two-span continuous girder was exposed to fire over 38% of its length of the first span and full length of the second span. A measurement method based on comparative rate of deflection was provided to predict the failure time in the hogging moment zone of continuous composite box bridge girders under certain localized fire exposure condition. Parameters including transverse and longitudinal stiffeners and fire scenarios were introduced to investigate fire resistance of the composite box bridge girders. Test results show that failure of the simply supported girder is governed by the deflection limit state, whereas failure of the continuous girder occurs through bending buckling of the web and bottom slab in the hogging moment zone. Deflection based criterion may not be reliable in evaluating failure of continuous composite box bridge girder under certain fire exposure condition. The fire resistance (failure time) of the continuous girder is higher than that of the simply supported girder. Data from fire tests is successfully utilized to validate a finite element based numerical model for further investigating the response of composite box bridge girders exposed to localized fire. Results from numerical analysis show that fire resistance of composite box bridge girders can be highly influenced by the spacing of longitudinal stiffeners and fire severity. The continuous composite box bridge girder with closer longitudinal stiffeners has better fire resistance than the simply composite box bridge girder. It is concluded that the fire resistance of continuous composite box bridge girders can be significantly enhanced by preventing the hogging moment zone from exposure to fire. Longitudinal stiffeners with closer spacing can enhance fire resistance of composite box bridge girders. The increase of transverse stiffeners has no significant effect on fire resistance of composite box bridge girders.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권5호
• /
• pp.349-357
• /
• 2003

Several microvascular anastomotic techniques have been described with methodical effectiveness, patency rates, healing state of microscopic findings. This experimental study presents the comparison of three types of arterial microvascular anastomotic techniques: end-to-end(ETE) anastomosis, end-in-end(EIE) anastomosis, and continuous technique. Sixty male Sprague-Dawley rats, 60 femoral arteries were used for this study. Twenty rats per each technique were used and sacrificed at post-operation 1 day, 3 days, a week, 2 weeks for scanning electromicroscopic findings. The patency was monitored by miniDoppler throughout total experimental periods. The anastomotic time on each method was measured to compare the technical effectiveness. The final results were as follows: 1. The anastomotic time for the end-in-end technique was significantly shorter than another techniques. The average time for each technique was measured as 15 minutes on EIE technique, 20 minutes on continuous technique and 25 minutes on ETE technique. 2. The patency rate for the end-in-end technique at 2 weeks also was superior to another techniques. The patency rate for each technique was demonstrated as 90 % on EIE technique, 85 % on ETE technique and 80 % on continuous technique. 3. The scanning electromicroscopic findings on healing condition of vessel endothelium during the observation period showed that the end results of EIE technique, ETE technique and continuous technique in sequence were good. The end-in-end technique proved to be the superior with regard to anastomotic time and patency rate when compared to end-to-end technuqe, so EIE techniqe might be well available for the case of large discrepancy of vessel size. The patency rate, microscopic healing findings in continuous technique were seen as the lowest level among the three anastomotic techniques, therefore the application of continuous technique was recommended only on the inevitable case.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.22.1-22.10
• /
• 2020

Objectives: This study investigated the influence of glide path size and operating kinetics on the time to reach the working length and the fracture resistance of Twisted File (TF) and Endostar E3 files. Materials and Methods: A total of 120 mandibular single-rooted premolars were selected. Two methods of kinetic motion (TF adaptive and continuous rotary motion) and file systems (TF and Endostar E3) were employed. The files were used in root canals prepared to apical glide path sizes of 15, 20, and 25. The time taken to reach the working length and the number of canals used before the instrument deformed or fractured were noted. Fractured instruments were examined with scanning electron microscopy. Results: The TF system took significantly more time to reach the working length than the Endostar E3 system. Both systems required significantly more time to reach the working length at the size 15 glide path than at sizes 20 and 25. A greater number of TFs than Endostar E3 files exhibited deformation, and a higher incidence of instrument deformation was observed in adaptive than in continuous rotary motion; more deformation was also observed with the size 15 glide path. One TF was fractured while undergoing adaptive motion. Conclusions: No significant difference was observed between continuous rotary and adaptive motion. The TF system and adaptive motion were associated with a higher incidence of deformation and fracture. Apical glide path sizes of 20 and 25 required significantly less time to reach the working length than size 15.

• 지식경영연구
• /
• 제23권3호
• /
• pp.285-311
• /
• 2022

본 연구에서는 S-O-R 프레임워크를 기반으로 개인에 대한 자극(유튜브 채널의 영상 특성, 유튜버 특성, 실시간 방송 특성)이 어떻게 유기체(지각된 유용성, 지각된 즐거움, 사회적 존재감)를 형성하고, 이것이 시청자 반응(지속시청의도, 유료후원의도)에 영향을 미치는지를 유튜브 실시간 방송 환경에서 검증해 보고자 한다. 이를 위해 연구모형 및 가설을 구성하였고, 유튜브 플랫폼의 실시간 방송 채널 서비스 이용자를 대상으로 수집한 369부의 설문자료를 분석하였다. 분석결과, 일부 영상 특성, 유튜버 특성, 실시간 방송 특성이 시청자의 지각된 유용성, 지각된 즐거움, 사회적 존재감에, 더 나아가 지속시청의도, 유료후원의도에 유의한 영향을 미치는 것을 확인하였다. 결론에서 연구결과의 이론적 및 실무적 시사점을 논의하였다.

• 대한화학회지
• /
• 제6권2호
• /
• pp.130-132
• /
• 1962

A new method of evaluating the mixing time in the continuous flow stirred tank is herein proposed. Experimental results to test the concept are also presented.The mixing time is defined as the time interval between the injection of a slug of an electrolyte solution into the tank and the moment at which an essentially straight line begins on a plot of the conductivity of effluent versus time.The proposed method of measuring the mixing time is valid even for the low mixing time (5 seconds) and the results obtained agree well with previous work, where the mixing time measurements were carried out by the injection of a dye into the feed stream.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.278-285
• /
• 2008

In this study the complex-valued continuous wavelet transform (CWT) has been applied in detection of Electrocardiograms (ECG) as response to various signal classification methods such as Fourier transforms and other tools of time frequency analysis. Experiments have shown that CWT may serve as a detector of non-stationary signal changes as ECG. The tested signal is corrupted by short time events. We applied CWT to detect short-time event and the result image representation of the signal has showed us that one can easily find the discontinuity at the time scale representation. Analysis of ECG signal using complex-valued continuous wavelet transform is the first step to detect possible changes and alternans. In the second step, modulus and phase must be thoroughly examined. Thus, short time events in the ECG signal, and other important characteristic points such as frequency overlapping, wave onsets/offsets extrema and discontinuities even inflection points are found to be detectable. We have proved that the complex-valued CWT can be used as a powerful detector in ECG signal analysis.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.179-196
• /
• 2013

An experimentally measured single footfall trace (SFT) from a walking subject needs to be extended into a continuous force curve, which can then be used as load for floor vibration serviceability assessment, or on which further analysis like discrete Fourier transform can be conducted. This paper investigates the accuracy, applicability and parametrical sensitivity of four extension methods, Methods I to IV, which extends the SFT into a continuous time history by the walking step rate, stride time, double support proportion and the double support time, respectively. Performance of the four methods was assessed by comparing their results with the experimentally obtained reference footfall traces in the time and frequency domain, and by comparing the vibrational response of a concrete slab subjected to the extended traces to that of reference traces. The effect of the extension parameter on each method was also explored through parametrical analysis. This study finds that, in general, Method I and II perform better than Method III and IV, and all of the four methods are sensitive to their extension parameter. When reliable information of walking rate or gait period is available in the test, Methods I or II is a better choice. Otherwise, Method III, with the suggested extension parameter of double support time proportion, is recommended.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권8호
• /
• pp.905-917
• /
• 1999

멀티미디어 시스템에서 수행되는 부하 중 상당 부분은 정해진 시간에 주기적으로 수행되어 연속 매체(continuous media)를 처리하는 주기 태스크들이다. 연속 매체들을 처리하는 두 주기 태스크의 수행 요청 시간(release time)간에 인공적인 위상(phase)을 줄 경우, 전체 부하의 처리 타이밍에 영향을 주게 되며, 특히, 적절한 위상을 부여할 경우 부하가 고르게 분산된다. 부하의 고른 분산은 태스크 간섭을 줄여 지터(jitter), 종료시한 초과(deadline miss), 그리고 긴 응답 시간(response time) 등의 문제를 해소시킨다. 본 논문에서는 새로운 위상 스케줄링(phased scheduling) 알고리즘 및 알고리즘을 개발하고 평가할 수 있는 실험 환경을 제안한다. 본 논문에 제시된 알고리즘은 저자들의 선행 논문 1 에서 제시한 알고리즘의 대안이다. 새로운 알고리즘은 정확하게 최적의 위상을 찾지는 않으나 기존 알고리즘보다 빠르게 수행되며 적용 범위가 넓다.Abstract A multimedia system consists of substantial amount of continuous media workload scheduled periodically at deterministic time points. Artificial phase between the invocation times of any two continuous media tasks affects the timing of the entire workload. A proper phase configuration distributes workload uniformly over time and reduces task interference that may otherwise result in jitter, deadline miss, and long response time. The objective of this paper is to work out a phased scheduling algorithm and to evaluate its effectiveness. The algorithm in this paper is an alternative approach to our previous work 1 . It is almost as accurate as the predecessor but two of three times faster in identifying the appropriate phase vector.