• Architectural research
• /
• v.14 no.1
• /
• pp.27-33
• /
• 2012

This study proposes analytical methods to establish the eigenfunction of continuous system due to substructuring and decoupling of discrete subsystems. The dynamic characteristics of updated continuous system are evaluated by the constraint effect of consistent deformation at the interfaces between two systems. Beginning with the dynamic equation for constrained discrete system, this work estimates the modal eigenmode function for the continuous system due to the addition or deletion of discrete systems. Numerical applications illustrate the validity and applicability of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.215-221
• /
• 2004

Large machine and structure can not be normally treated as lumped parameter system. Such machine or structure must be broken down to individual beams or panels the motion of which must be analysed before an absorber system can be designed for each element. The absorber may be a lumped parameter system or a continuous system. One of the most common elements in a machine or structure is the cantilever, and in this paper is considered the design of a continuous parameter absorber to reduce the transverse vibrations of a beam. So this paper describes the method to obtain the accurate information about combined continuous beam system with DVA. This information is obtained from the combined system's receptance. and this paper shows the convenience and useful informations when design the dynamic vibration absorber with the combined system's receptance.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.281-290
• /
• 1996

Determination of force system and prediction of side effects from unbent straight wire engaged in edgewise bracket is clinically very difficult because it is statically indeterminate system. This study is to develop a linear beam theory that explains the force system for straight wire engaged in edgewise bracket regardless of geometry(a/b), material, cross section of wire, and interbracket distance. 1. Formula for force system of bilateral fixed end beam was derived. 2. It is possible to calculate force system of each tooth engaged in continuous straight wire. 3. The possibility and location of permanent deformation can be predicted.

• Architectural research
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2007

The static behavior of continuous system is described by the elastic curve method or is approximately analyzed by a finite element method to be modeled as a discrete system. If a continuous system is constrained by linear constraints which restrict its static behavior, its behavior can be approximately described by the finite element method. It is not easy to describe the constrained behavior by continuous coordinate system. Starting from the generalized inverse method provided by Eun, Lee and Chung, this study is to expand the equation to the continuous systems, to perform the structural analysis of the beam under a uniform loading with interior spring supports, and to investigate the validity of the proposed method through applications.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.115-118
• /
• 2004

In this paper, a systematic design approach based on parallel distributed compensation techniques is proposed for anticontrol of chaos in a general continuous-time Takagi-Sugeno (TS) fuzzy system. The verification of chaos in the controlled continuous-time TS fuzzy system is done by the following procedure. First, we establish an asymptotically approximate relationship between a continuous-time TS fuzzy system with time-delay and a discrete-time TS fuzzy system. Then Marotto theorem is applied. The boundedness in the controlled continuous-time TS fuzzy system is also proven via its associated discrete-time TS fuzzy system.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2215-2217
• /
• 2004

In this paper, a systematic design approach based on the parallel distributed compensation technique is proposed for chaotifying a general continuous-time Takagi-Sugeno (TS) fuzzy system. The fuzzy parallel distributed compensation controller (FPDCC) is composed of the feedback gain and time-delay feedback. The verification of chaos in the controlled continuous-time TS fuzzy system is done by the following procedures. First, we establish an asymptotically approximate relationship between a time-delay continuous-time TS fuzzy system and a discrete-time TS fuzzy system. Then, Marotto theorem is applied. Therefore, the generated chaos is in the sense of Li and Yorke. The boundedness in the controlled continuous-time TS fuzzy system is also proven via its associated discrete-time TS fuzzy system.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.113-120
• /
• 2016

Steel in a continuous reheat furnace is heated to higher temperature to be treated in the rolling steel process. Due to this reason the continuous reheat furnace system requires an optimal control system to adjust the temperature inside the furnace. Level 2 control systems for continuous reheat furnaces generate automatic heating set points for the level 1 system of the furnace based on the mathematical thermal model which can give a good estimation of steel heating inside the furnace and is used to adjust heating requirements to optimize furnace combustion. For the current study the analytic methodology based on the design procedure from the systems engineering to develop new level 2 control system of a continuous reheat furnace was proposed. The system analysis and the requirements of the level 2 control system were derived using the unified modeling language (UML) 2.0, and the design of database and the graphic user interface (GUI) for the level 2 control system were conducted.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.333-337
• /
• 1994

In order to develop the whey beverage, we examined the optimum conditions for alcohol fermentation by Kluyveromyces tragilis ATCC 46537. The optimum conditions for alcohol production by K. fragilis ATCC 46537 were as follows; pH 4.5, $30^{\cir}C$, with a supplement of 50 g/l of lactose. To develop a continuous production of alcohol from whey, we compared batch fermentation with continuous iermentation in conjunction with UF system. Batch fermentation produced 11.0 g/l of alcohol, whereas pseudocontinuous and continuous fermentation with UF system produced 8.5 g/l of alcohol. To increase the alcohol production, we added 50 g/l of lactose to both fermentations. Batch fermentation with lactose supplement produced 15.7 g/l of alcohol and continuous fermentation with lactose supplement in conjunction with UF system produced 15.0 g/l of alcohol. These results clearly demonstrate that the UF system can be used to increase the alcohol production from whey, supplemented with exogenous lactose.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.960-964
• /
• 2004

During system resource improvement process that based on Object-Oriented technology could be affect to the continuous system performance if lack appropriate management and control objects mechanism. This paper proposes a methodology to support continuous system performance and its stability. The adoption is based on Java Container Framework and Collections Framework for object collection. Also includes Software Engineering, Object Migration and Multiple Class Loaders mechanism accommodate to construct Continuous Migration Container (CMC). CMC is a runtime environment provides interfaces for management and control to support upgrading object process. Upgrade object methodology of CMC can be divided into two phase are object equivalence checking and object migration process. Object equivalence checking include object behavior verification and functional conformance verification before object migration process. In addition, CMC use Multiple Class Loaders mechanism to support reload effected classes instead of state transfer in migration process while upgrading object. These operations are crucial for system stability and enhancement efficiency.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.933-942
• /
• 2014

We give a representation of the component of solutions with characteristic multiplier 1 in a periodic linear inhomogeneous continuous system. It follows from this representation that asymptotic behaviors of the component of solutions to the system and to its associated homogeneous system are quite different, though they are similar in the case where the characteristic multiplier is not 1. Moreover, the representation is applicable to linear discrete systems with constant coefficients.