• 에너지공학
• /
• 제25권1호
• /
• pp.1-8
• /
• 2016

저온환경에서 석유생산이 이루어질 경우 유동관, 라이저와 같은 석유생산시스템 내에서 온도에 민감한 왁스 고형물이 빈번히 집적되어 석유 이송을 방해하거나 배관을 막아 유동안정성 확보를 위한 시간 소모와 경제적 손실이 발생할 수 있다. 이러한 왁스 집적 문제를 제어하기 위해 오일 내 왁스가 처음 석출되기 시작하는 온도인 왁스생성온도를 사전에 파악하는 것이 중요하다. 기존 왁스생성온도 표준측정법은 왁스결정 석출로 인하여 변하는 시료의 혼탁도를 육안으로 확인하는 한계가 있으며, 오일의 연속적인 온도변화를 측정하기 어려워 정확도가 낮다. 이 연구에서는 오일의 왁스생성온도를 정확하게 측정하고자 왁스생성온도 측정 가시화 실험시스템을 통해 시간에 따라 온도를 감소시키며 왁스생성거동을 촬영하였다. 또한 영상 처리기법으로 투명 오일시료의 명도변화를 분석하여 왁스생성온도를 측정하였으며, 이를 표준측정법의 결과와 비교분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.284-284
• /
• 2009

We have fabricated semiconductor nanocrystals using phase separation on flexible substrates for future application in QD-LEDs. The phase separation between the CdSe semiconductor nanocrystals and TPD organic underlayer can occur during the solvent drying, and the CdSe may rise towards the surface of the coated films, which is arranged into close packed array called self-assembly process. In this work, the polyethylene naphthalate (PEN) films of $200{\mu}m$ thickness was used as a flexible substrate, which was coated with indium tin oxide(ITO) as a transparent electrode of <$15{\Omega}/cm^2$. A number of solvents such as chloroform, toluene, and hexane was used and their coating properties were investigated using the spin coating process. The dispersion of both QD and TPD was rather poor in toluene and hexane and resulted in rougher surface and some aggregates. Meanwhile, the surface roughness of templates can be a very critical issue in the fabrication of QD-LED devices. Some experiments was performed to reduce the ~4nm surface roughness of the PEN films and It can be decreased to the minimum of ~0.7nm. Also discussed are the optical properties of semiconductor nanocrystals used in this phase separation and possible large area and continuous coating process for future application.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.80-85
• /
• 2004

Chromium-carbon (Cr-C) and chromium-carbon-phosphorus (Cr-C-P) alloy deposits using trivalent chromium sulfate baths containing potassium formate were prepared to study their current efficiency, hardness change and phase transformations behavior with heat treatment, respectively. The current efficiencies of Cr-C and Cr-C-P alloy deposits increase with increasing current density in the range of 15-35 A/dm$^2$. Carbon content of Cr-C and phosphorous of Cr-C-P layers decreases with increasing current density, whereas, the carbon content of Cr-C-P layer is almost constant with the current density. Cr-C deposit shows crystallization at $400^{\circ}C$ and has (Cr+Cr$_{ 23}$$C_{6}$) phases at $800^{\circ}C$. Cr-C-P deposit shows crystallization at $600^{\circ}C$ and has (Cr+Cr$_{23}$ $C_{6}$$+Cr_3$P) phases at $800^{\circ}C$. The hardness of Cr-C and Cr-C-P deposits after heating treatment for one hour increase up to Hv 1640 and Hv 1540 and decrease about Hv 820 and Hv 1270 with increasing annealing temperature in the range of $400～^{\circ}C$, respectively. The hardness change with annealing is due to the order of occurring of chromium crystallization, precipitation hardening effect, softening and grain growth with temperature. Less decrease of hardness of Cr-C-P deposit after annealing above $700^{\circ}C$ is related to continuous precipitation of $Cr_{23}$ $C_{6}$ and $Cr_3$P phases which retard grain growth at the temperature.

• Journal of Periodontal and Implant Science
• /
• 제23권1호
• /
• pp.16-26
• /
• 1993

In order to investigate the healing effect on inflammation and bone regeneration of low power density laser radiation in dogs, experimental periodontitis was made in dog mandibular 3rd, 4th premolars. All teeth were classified with four groups of two experimental group and control groups. The second group were irradiated on periodontitis site and the first group were control. The fourth group were irradiated on periodontitis site flap operation and the third group were flap control. Experimental groups were irradiated with GaAs low power density laser of pulse wave and continuous wave of 904nm every day by five days respectively and then control group and experimental groups were evaluated by histo-pathological study. The results were as follows : 1. Experimental periodontits site of dog were irradiated with GaAs low power laser results in reducing of pseudoepitheliomatous proliferation and inflammation at light microscope. 2. After irradiation with low power density laser, experimental groups were revealed that PDL forming activity were increased and newly formed collagen deposition were observed. 3. Low power density lsaer irradiation on experimental periodontits site after flap operation showed that decreasing of inflammation, reducing of osteoclast activity. Capillary proliferation, reduction of pseudoepitheliomatous proliferation. 4. After irradiation with low power density laser on flap experimental site, experimental groups were revealed that newly formed collagen in periodontal ligament and alveolar bone were detected on MT staining.

• 한국해양공학회지
• /
• 제21권2호
• /
• pp.22-34
• /
• 2007

We present basic data for developing new research topics and closely examine the existing data on the development and organization of the Nakdong River Estuary Delta by analyzing various studies of the area, including ocean engineering, coastal engineering, ocean environmental engineering, geomorphological, and geological studies. We first defined the general concepts related to the estuary and delta and reviewed the historical development of the Nakdong River Estuary Delta over the past 100 years. We then examined the origin and core elements of the estuary deposits that constitute the delta. In addition, we scrutinized the main factors affecting the development of the delta and analyzed existing research on delta development mechanisms by core researchers. The construction of an estuary barrage is one of the main factors effecting estuarine circulation and has altered the physical oceanic environment, area of deposition, atmospheric environment, and vegetation community of the delta. These factors affect the estuary circulation in turn, altering the delta. Along the Nakdong River, an unsteady-state sandy barrier appears at approximately three times the distance of the wavelength of incident offshore waves, and this terrain forms approximately 10-15 years after reclamation in the interdistributary upper stream and transforms the shoreline. It is necessary to develop a technique to predict terrain change that reproduces the erosion and accumulation of estuarine deposits. To determine the parameters and variables necessary to reproduce this system, continuous on-site monitoring is necessary. The existing research did not fully examine the terrain changes in Nakdong River Estuary or the periodic developmental characteristics. To understand the future process of estuary delta development, it is necessary to establish an integrated management system.

• 지능정보연구
• /
• 제15권4호
• /
• pp.213-224
• /
• 2009

본 연구는 국내 300mm 웨이퍼를 이용하여 반도체 제품의 제조라인을 대상으로 수행 되었던 자동화 생산을 위한 일정계획 시스템 재 구축 프로젝트에 관한 내용이다. 본 프로젝트의 주요 목적은 반도체 제조라인 내의 세정, 확산, 포토, 증착과 같은 주요공정들을 대상으로 효율적인 일정계획 수립 알고리듬을 개발하고 그것을 실시간 일정계획 시스템에 구현함으로써 반도체 제조라인의 자동화 생산률을 향상시키는 것이다. 본 논문에서는 여러가지 주요 공정들 중 제한된 대기시간 제약과 배치공정의 특성이 존재하는 세정과 확산으로 이루어진 연속공정 구간을 대상으로 개발된 일정계획 알고리듬과 실시간 일정계획 시스템의 개발에 대한 내용에 초점을 두었다. 일정계획 시스템 재 구축 프로젝트가 시작 될 시점에 세정과 확산 공정의 자동화 생산률은 각각 50%와 10% 정도 였으나, 프로젝트 수행 완료 후에는 각각 91%와 83% 까지 자동화 생산률이 향상 되었다. 자동화 생산률의 향상은 작업자의 인건비 절감, 생산성의 향상, 지속적이고 편차 없는 생산을 의미한다.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.702-706
• /
• 2016

We demonstrated that self-separation FS-GaN (freestanding-GaN) was grown on MELO (maskless epitaxially lateral overgrowth) GaN template by horizontal HVPE (hydride vapor phase epitaxy). Before thick GaN grwoth, MELO GaN template was grown on patterned GaN template by MOCVD (metal organic chemical vapor deposition). The laterally overgrown GaN would consist of a continuous well coalesced layer. The mixed TDD (threading dislocation density) of seed and wing region were $8{\times}10^8cm^{-2}$ and $7{\times}10^7cm^{-2}$, respectively. After thick GaN grown by HVPE, the self-separation between thick GaN and sapphire substrate was generated at seed region. The regions of self-separation for FS-GaN and sapphire were observed by FE-SEM. Moreover, Raman results indicated that the compressive strain of seed and wing regions at FS-GaN substrate were slightly released compared to that of thick GaN grown on conventional GaN template. The optical properties of the FS-GaN substrate were examined by using PL (photoluminescence). The PL exhibited that donor bound exciton and donor acceptor pair were observed at low temperature. The effects on optical and structural properties of FS-GaN substrate have been discussed in detail.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.302-308
• /
• 2018

다층 박막 스퍼터링(Multi-Layer Sputtering)은 상이한 물질을 원하는 두께의 박막을 다층(Multi-Layer) 으로 형성함을 목적으로 한다. 다층 박막 증착 공정은 공정 시간이 비교적 많은 비중을 차지하는데, 그 주요 원인은 공정 시간에 비해 증착하고자하는 기판의 이동 시간과 챔버를 고진공 상태로 만드는 시간이 많이 소요되기 때문이다. 반도체나 디스플레이 산업은 하나의 챔버에서 단일 물질을 스퍼터링하고 기판이 다관절 로봇을 통해 다른 챔버로 이동하여 다른 물질을 스퍼터링하는 공정이 대부분인데, 이는 필연적으로 공정 설비 내에 여러 개의 챔버와 진공펌프, 다관절 로봇이 필요하다. 이러한 문제점을 해결하기 위해 본 논문에서는 단일 진공 챔버 내에서 서로 상이한 물질을 증착하는 다층박막 스퍼터링 장치에 대한 제어시스템을 제안하고 TFT 공정에서 적용한다. 제어시스템의 제작과 실험을 통해 유효성을 입증한다.

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.71-78
• /
• 2001

Using sodium hypophosphite as reducing agent, bath composition and plating condition of electroless copper plating on plating rate have been studied. The followings were determined as optimum, bath composition; $CuSO_4\;0.025M,\;NiSO_4\;0.002M,\;NaH_2PO_2\;0.4M$, sodium citrate 0.06M, $H_3BO_3$ 0.6M, thiourea or 2-MBT $0.2mg/{\ell}$, and operation conditions; pH $9{\sim}10$ at bath temperature rage of $60{\sim}70^{\circ}C$. A small amount of nickel ion($Ni^{2+}/Cu^{2+}$=0.002/0.025) to the hypophosphite reduced solution promotes autocatalysis and continuous plating. An additive such as thiourea or 2-MBT of a small amount($0.2mg/{\ell}$) can be used to stabilize the solution without changing plating rate much. The attivation energy between $20^{\circ}C\;and\;70^{\circ}C$ were calculated to be 11.3kcal/mol for deposition weight. Plating reaction had been ceased by the adjustment of pH above 13, temperature higher than $90^{\circ}C\;and\;under\;20^{\circ}C$. Deposited surface became worse in the case of increment of bath temperature above $80^{\circ}C$.

• 한국습지학회지
• /
• 제19권1호
• /
• pp.132-143
• /
• 2017

유사의 침식 이송 퇴적으로 인해 발생할 수 있는 문제를 최소화하기 위해 하천에서의 정기적인 유사량 자료의 획득이 필수이다. 하지만 현재 국내에서의 유사량 측정 계획으로는 유사량 추정에 어려움이 있어 이를 대체하기 위해 경험식이나 수치모형을 활용하고 있다. 따라서 본 논문에서는 유역에서의 유사량 산정과 자료의 연속성 확보를 위해 국내에서 개발된 격자기반 강우-유출-유사 모형인 K-DRUM 모형을 적용하였다. 17개의 중권역에 대한 유량과 유사량을 산정하고 실측자료와 비교를 통해 모형의 적용성을 검토하였다. 정량적인 평가를 위해 NSE, PBIAS, RSR 등을 기준항목으로 사용하였으며, 유량에 대한 모의결과는 강우의 경향을 잘 반영하며 높은 통계값을 나타내었다. 유사량의 경우 유역의 토양침식과정을 물리적으로 잘 반영하였으며, 실측자료를 이용하여 보정을 수행하였을 때 그 유역에서 연속적인 유사량 자료를 산정하는데 적용성이 우수한 것으로 나타났다.