• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.174-182
• /
• 1996

In continuous speech recognition system, it is possible to implement the system which can handle unlimited number of words by using limited number of phonetic units such as phonemes. Dividing continuous speech into the string of tems of phonemes prior to recognition process can lower the complexity of the system. But because of the coarticulations between neiboring phonemes, it is very difficult ot extract exactly their boundaries. In this paper, we propose the algorithm ot extract short terms which can represent each phonemes instead of extracting their boundaries. The short terms of lower spectral change and higher spectral chang eare detcted. Then phoneme changes are detected using distance measure with this lower spectral change terms, and hgher spectral change terms are regarded as transition terms or short phoneme terms. Finally lower spectral change terms and the mid-term of higher spectral change terms are regarded s the represent each phonemes. The cepstral coefficients and weighted cepstral distance are used for speech feature and measuring the distance because of less computational complexity, and the speech data used in this experimetn was recoreded at silent and ordinary in-dorr environment. Through the experimental results, the proposed algorithm showed higher performance with less computational complexity comparing with the conventional segmetnation algorithms and it can be applied usefully in phoneme-based continuous speech recognition.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.733-738
• /
• 2004

Recently continuous welded rail is generally used to ensure running performances and to overcome the problems such as structural vulnerability and fastener damage at the rail expansion joint. Though the use of continuous welded rail on bridge has the advantage of decreasing the vibration and damage of rail, it still the risk of buckling and breaking of rail due to change of temperature, starting and/or breaking force, axial stress concentration and so on. So, VIC code and many methods has been developed by researchers considering rail-bridge interaction. Although there are many research concerning stability of continuous welded rail about temperature change on bridge and starting and/or breaking force, the study of continuous welded mil for earthquake load is still unsufficient. In this study, the nonlinear seismic response analysis of continuous welded rail on bridge considering soil-structure interaction, geotechnical characteristic of foundation and earthquake isolation equipment has been performed to examine the stability of continuous welded rail.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.125-130
• /
• 2001

A existing design method of PSC girder bridges, according to total service loads, stress required tendon force at a time. Because this design method increases beam depth, design of long span is difficult. However, As UC girder stressing at difficult loading stages reduces sectional depth of PSC girder, both design and operation of long span bridges is possible. so, this study analyzes the effect of design parameter (Girder Strength, Girder Spacing, Span Length, Joint Strength) on the beam depth of IPC girder continuous bridges, and shows sectional depth of UC girder for design of long span bridges. According to analysis, when a continuous bridges of same length span is at strength of joint over strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed and when a continuous bridges of different span length is at strength of joint below strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed. In two case, a change of beam depth is mostly observed over strength of girder of 350kg/$cm^{2}$ according to analysis of deflection data, a continuous bridges of IPC girder is nearly satisfied.

• Journal of Pharmacopuncture
• /
• v.10 no.3
• /
• pp.71-76
• /
• 2007

Objectives This experimental study was performed to investigate the continuous anti-bacterial potency of Coptidis rhizoma extract on cultivation of Staphylococcus species(S. aureus, S. epidermidis) that induce eye disease. Methods Minimal inhibitory concentration(MIC) was measured by dropping to $50{\mu}l$ diluted Coptidis rhizoma extract(100%, 10%, 1%, 0.1%) on S. aureus, S. epidermidis that were cultivated from 2 to 6 days. Anti-bacterial potency was measured by the size of inhibition zone with change of volume($20{\mu}l,\;30{\mu}l,\;40{\mu}l,\;50{\mu}l$). Results 1. Anti-bacterial potency of Coptidis rhizoma extract on S. aureus was appeared in 100%, 10% and was the same as anti-bacterial potency of 2 days and 6 days. Anti-bacterial potency with change of volume(100%) was increased in propotion to increase volume on all samples. Anti-bacterial potency with change of volume(10%) was increased in propotion to increase volume on all samples except $20{\mu}l$. Anti-bacterial potency of Coptidis rhizoma extract on S. aureus was appeared continuous. 2. Anti-bacterial potency of Coptidis rhizoma extract on S. epidermidis was appeared in 100%, 10% and was the same as anti-bacterial potency of 2 days and 6 days. Anti-bacterial potency with change of volume(100%) was increased in propotion to increase volume on all samples. Anti-bacterial potency with change of volume(10%) was appeared in $50{\mu}l$. Anti-bacterial potency of Coptidis rhizoma extract on S. epidermidis was appeared continuous. Conclusions Anti-bacterial potency of Coptidis rhizoma extract on cultivation of S. aureus & S. epidermidis was showed continuous.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.175-184
• /
• 2015

In this study GC and PAS were used to calculate $N_2O$ concentration of exhaust gas from Wood Chip combustion system. Fuel supplied to the incinerator was collected and analyzed and then the analysis result was used to calculate $N_2O$ emissions. Tier 3 and Tier 4 Method were used to calculate the $N_2O$ emissions. Plant's Specific emission factor of $N_2O$ by Tier 3 Method was 0.35 kg/TJ, while default emission factor of Wood?Wood Waste proposed by 2006 IPCC G/L was 4 kg/TJ. So the $N_2O$ emission factor of this study was 3.65 kg/TJ lower compared to the IPCC G/L. The total emissions calculated by Plant's specific emission factor was 4.22 kg during the measuring period, but by Tier 4 Method it was 7.88 kg. This difference in emissions was caused by the difference of continuous measuring and intermittent sampling. It would be necessary to apply continuous measuring to calculate emissions of $Non-CO_2$ gas whose the density distribution is relatively high. However currently, according to the target management guideline of greenhouse gas and energy, the continuous measuring method to calculate greenhouse gas emission is applied only to $CO_2$. Therefore for reliable greenhouse gas emission calculation it would be necessary to apply continuous measuring to calculate $Non-CO_2$ gas emission.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.4
• /
• pp.1-9
• /
• 2022

Rural decline due to the decrease of the local population is an inevitable phenomenon, and a vicious cycle has been formed between a lack of basic living services and a population decrease in rural areas. Therefore, the study aims to derive the migration decision-making characteristics based on basic living service infrastructure data in rural areas. To do this, the population change over the past 20 years was categorized into six types, and the relationship between the classified population change types and the number of basic living service infrastructures was analyzed using decision tree analysis. Of the total 3,501 regions, 801 regions were the continuous decline type, of which 740 were rural areas. On the other hand, among 569 regions that were the continuous increase type, 401 regions were urban areas, confirming the population imbalance between rural and urban areas. As a result of the decision tree analysis on the relationship between population change types and the distribution of basic living service infrastructure, the number of daycare centers was derived as an important variable to classify the continuous increase type. Hospitals, parks, and public transportation were also found to be major basic living services affecting the classification of population change types.

• The Korean Nurse
• /
• v.34 no.2
• /
• pp.66-76
• /
• 1995

This study was done to identify burnout factors and coping methods surveyed upon 59 out-patients who have continuous peritoneal dialysis. Raw data was collected after being filled the questionnaire by subjects or directly interviewing at the peritoneal dialysis room of the K hospital. Taegu. Then. data was classified and analyzed according to categories of questions and revealed facts. The following results are obtained: The average age of subjects is 43.8 years old and the average duration of continuous peritoneal dialysis is 16.9 months. The reasons of choosing continuous peritoneal dialysis are 61. 0% by recommendation of doctor and nurse ranked as the first, 32. 2% by patient own decision ranked as the second. The 57.6% of subjects were experienced complications related to continuous peritoneal dialysis. The major psychosocial burnout factors because of the dialysis are confinement, wasting time, change in responsibility and role as a member of family, worriment for infection, interference in job: and the major physiological burnout factors are fatigue and weakness. Among the main coping methods, the problem-oriented coping methods are "accept the given situation itself, "actively try to change the situation", "try to maintain some controls over the situation", and the affective-oriented coping method are "give up and accept as fate", "pray", "ask comfort or help from family and friends", "sleep", "cry". Conclusively, it can be said that effective nursing intervention is needed to prevent continuous peritoneal dialysis burnout.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.163-174
• /
• 2001

This paper is to study the characteristics of axial force behavior that operates to the part of turnout when it makes the turnout and the continuous welded rail unifying. The study is to model by using the 50kgN rail No. 15 turnout used in the domestic national railway and the UIC60 rail No. 18 turnout used in the rapid transit railway as the finite elements for analyzing the axial force behavior of the turnout by the continuous welded rail. It is to analyze the characteristics of behavior according to the change of creep resistance, ballast resistance and the change of parameter valuables of heel joint by the axial force simulation in making the continuous welded rail and then, it is to present the result. As the result of research on the parameter valuables through the analysis, it shows that the maximum axial force of turnout by the continuous welded rail are largely subordinated to the maximum resistance of heel joint and the fitting devices than the ballast resistance. Also it shows that the maximum axial force produced changes a lot according to the characteristics of creep resistance of the fitting part and the ballast resistance.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.93-106
• /
• 2016

Recently, Open Course Ware service area which offers free lecture materials has been steadily growing. This change comes from a paradigm shift of education service caused by the progress of ICT and a role change of consumers. Knowledge creation from higher educational institutions is slow compared to change of society. Therefore, consumers escape from one-sided education, and perform a new role of knowledge generation. Nevertheless, there is not much of academic research of Open Course Ware. Consequently, the paper is dedicated to empirical study on effect of perceived value, information system quality and brand trust on intention to continuous use. As implications for the research, as a practical point of view, the results-an economic side that offers contents for free of charge, a contents side that is fresh, various and substantial, a systematic side that makes customers to use the system easily, a service side which takes charge of customers support and brand trust affect satisfaction and intention to continuous use - can be used for establishment of executive strategies.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.972-988
• /
• 2021

At present, DevOps environments are getting popular in software organizations due to better collaboration and software productivity over traditional software process models. Software artefacts in DevOps environments are vulnerable to frequent changes at any phase of the software development life cycle that create a continuous integration continuous delivery pipeline. Therefore, software artefact traceability management is challenging in DevOps environments due to the continual artefact changes; often it makes the artefacts to be inconsistent. The existing software traceability related research shows limitations such as being limited to few types of artefacts, lack of automation and inability to cope with continuous integrations. This paper attempts to overcome those challenges by providing traceability support for heterogeneous artefacts in DevOps environments using a prototype named SAT-Analyser. The novel contribution of this work is the proposed traceability process model consists of artefact change detection, change impact analysis, and change propagation. Moreover, this tool provides multi-user accessibility and is integrated with a prominent DevOps tool stack to enable collaborations. The case study analysis has shown high accuracy in SAT-Analyser generated results and have obtained positive feedback from industry DevOps practitioners for its efficacy.