• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.114-119
• /
• 2009

Field test was conducted to investigate primary factors reducing rapeseed harvesting using a reciprocating cutter-bar of combine. The results showed that the correlation between crop moisture content and yield loss had a U-type, which indicated that the yield reduction increased at too high and too low crop moisture contents. The proper ranges of crop moisture contents were 27${\sim}$35%, 21${\sim}$56%, and 62${\sim}$73% in case of grain, pod and stem, respectively. Crop moisture content was negatively correlated with header loss, but positively correlated with threshing loss. In contrary, stem moisture content showed positive correlations with total loss, threshing loss and separation loss. Working speed was positively correlated with header loss. Total flow rate, pod flow rate and stem flow rate were highly correlated with threshing loss and separation loss. However, grain flow rate did not show any correlation with total loss. According to the principal component analysis, two principal components were derived as components with eigenvalues greater than 1.0. The contribution rates of the first and the second components were 52.7% and 38.9%, which accounted for 91.6% of total variance. As a contributive factor influencing total loss of rapeseed mechanical harvesting, a crop moisture content factor was greater than a crop flow rate factor. The stepwise multiple regression analysis for total loss was conducted using crop moisture content factor, crop flow rate factor and coefficient. However, the model did not show any correlation among independent and dependent factors ($R^2$=0.060).

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.156-164
• /
• 1984

The characteristic of pyrolytic carbon deposited in a fluidized bed as measured by density apparent crystallite size and viewed metallographically under polarized light can be easily controlled by adjusting the deposition parameters such as deposition temperature and propane flow rate or silicon content. The density of isotopic pyrolytic carbons deposited from propane between 120$0^{\circ}C$ and 140$0^{\circ}C$ increases with increasing propane flow rate and decreasing deposition temperature from 1, 73g/cc to 2.08g/cc. The apparent crystallite size Lc parameter appears to depend only on deposition temperature being entirely independent of the propane flow rate. The carbon matrix density of the silicon-alloyed carbonds deposited from propane and methyltrichlorosil-ane from 2.05g/cc for a silicon content around 9wt% to 2.67g/cc for a silicon content of 36.7wt% The Lc parameter of the deposition temperature being entirely independent of the silicon content.

• 한국분무공학회지
• /
• 제6권1호
• /
• pp.18-24
• /
• 2001

Liquid fossil fuel contaminated by water can cause trouble in the combustion processes and affect the endurance of a combustion system. Using an optical sensor to monitor the water content instantaneously in a fuel pipeline is an effective means of controlling the fuel quality in a combustion system. In two component liquid flows of oil and water, the flow pattern and characteristics of water droplets are changed with various flow conditions. Additionally, the light scattering of the optical sensor measuring the water content is also dependent on the flow patterns and droplet characteristics. Therefore, it is important to investigate the detailed behavior of water droplets in the pipeline of the fuel transportation system. In this study, the flow patterns and characteristics of water droplets in the turbulent pipe flow of two component liquids of gasoline and water were investigated using optical measurements. The dispersion of water droplets in the gasoline flow was visualized, and the size and velocity distributions of water droplets were simultaneously measured by the phase Doppler technique. The Reynolds number of the gasoline pipe flow varied in the range of $4{\times}10^{4}\;to\;1{\times}10^{3}$, and the water content varied in the range of 50 ppm to 300 ppm. The water droplets were spherical and dispersed homogeneously in all variables of this experiment. The velocity of water droplets was not dependent on the droplet size and the mean velocity of droplets was equal to that of the gasoline flow. The mean diameter of water droplets decreased and the number density increased with the Reynolds number of the gasoline flow.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.52-58
• /
• 2010

This study investigated the engineering properties of waste tire powder-bottom ash added composite soil, which was developed to recycle dredged soil, bottom ash, and waste tire powder. Test specimens were prepared using 5 different percentages of waste tire powder content(0%, 25%, 50%, 75%, and 100% by weight of the dry dredged soil), three different percentages of bottom ash content (0%, 50%, and 100% by weight of the dry dredged soil), and three different particle sizes of waste tire powder (0.1~2 mm, 0.9~5 mm, and 2~10 mm). Several series of unconfined compression tests, direct shear tests, and flow tests were conducted. The experimental results indicated that the waste tire powder content, particle size of waste tire powder, and bottom ash content influenced the strength and stress-strain behavior of the composite soil. The flow value increased with an increase in water content, but decreased with an increase in waste tire powder content.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.54-62
• /
• 2015

In this paper, we investigate the impacts of the following four influential factors on flow in digital reading: contents, platforms, motivations, and places. The contents factor was subdivided into "news articles" and "journal papers"; platforms is comprised of "mobile phones," "tablets," and "laptops"; motivations consists of "pleasure" and "assignments"; and "home," "on the go," and "out of home" are the subdivisions of the places factor. We conducted a questionnaire survey with the study's participants and the following results are shown: 1) The flow during the reading of news articles is influenced by motivations, whereas the flow during the reading of journal papers is influenced by platforms. 2) Regarding mobile phones, motivations significantly affected the flow, whereas content types significantly affected the flow for tablets; also, laptops provided the best flow and articles can be read on the platform regardless of motivations. 3) Reading for pleasure rather than for assignments positively influenced the flow for all of the platforms. 4) With respect to news articles, the places providing flow are different across platforms. However, for journal papers, the places out of home provided good flow. For tablets, the places for flow significantly depended on the content type, which is not the case for laptops.

• 한국측량학회지
• /
• 제36권1호
• /
• pp.25-32
• /
• 2018

Namdae-cheon in Gangwon-do Province, Korea, is a valuable well-preserved lagoon. The estuary of Namdae-cheon Stream is closed because of the surrounding natural sand shoal. Thus, during the dry season, river water cannot easily flow to the ocean and therefore stagnates. River water congestion causes environmental deterioration of estuaries, often by eutrophication. In this study, we examined wall disintegration in the estuary area and used it to determine appropriate measures for the conservation of estuary water quality in the future. A total of 24 sites were selected, with 13 sites on the west side and 11 sites on the east side of the estuary study area. Samples were collected and analyzed for particle size and moisture content both vertically and horizontally. Sedimentary deposition rate was measured, and subsidence analysis was performed. Particle size, water content, sedimentary deposition, and subsidence analyses indicated that flow shifted to the west during the study period. In conjunction with other variables that may affect changes in flow, these parameters can be used in future research to predict shoal breaches and associated changes in water flow direction.

• 디지털융복합연구
• /
• 제9권4호
• /
• pp.131-141
• /
• 2011

본 연구는 모바일 콘텐츠 서비스의 활성화 및 사용자 수용을 보고자 기술수용 모델을 기본으로 Flow경험 변수를 추가해 사용자의 재 구매 의도를 연구하고자 하는데 그 목적을 두고 있으며, 360명의 모바일 사용자를 대상으로 변수 간의 영향관계를 분석하고자 실증적 연구를 진행하였다. 본 연구는 향후 모바일 콘텐츠의 애플리케이션 시장에 대한 전략적 접근을 용이하게 해줄 것으로 기대하며 모바일콘텐츠의 고객수용과 행위에 대한 통찰력을 제시할 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.67-72
• /
• 2002

포장내의 흙들의 함수비는 강우, 온도 등의 기후적 요인에 따라 계절적으로 변화한다. 그것은 강우로인한 동수경사가 습기의 흐름을 유발하고, 온도변화로 인한 온도경사가 직.간접적으로 열흐름뿐만아니라 습기의 흐름을 유발하기 때문이다. 포장내의 흙들은 보통 불포화상태로 존재한다. 그리고 열의 흐름과 습기의 흐름은 상호간에 복잡한 작용을 하는 복합적인 과정들로 인식되어 왔다. 이 논문은 불포화토내의 복합적인 열의 흐름과 습기의 흐름에 대해 유한요소법을 이용한 하나의 일차원적 분석모델을 제시한다. 이 모델은 온도와 함수비 변화뿐만아니라 시간에 따른 동상을 예측하기 위하여 사용될 수 있다. 온도 및 함수비의 변화 그리고 동상의 예측은 포장의 설계 및 유지관리를 위해 의미 있는 일이 될 것이다. 이 모델은 다른 모델의 결과들과 비교를 통해서 검증된다.

• Corrosion Science and Technology
• /
• 제14권1호
• /
• pp.25-32
• /
• 2015

The alloy content of structural materials of nuclear power plants has been recognized an important factor in predicting flow accelerated corrosion (FAC). In particular, many literature data reported that chromium content is one of the most important alloying element and even a small amount of chromium is effective to suppress FAC. This report reviewed and compared chromium models of Ducreux, Bouchacourt, and Kastner which were used in predicting FAC rates. The plant data indicate that Ducreux model may be conservative for the specimen containing 0.15 wt% chromium. The related articles were reviewed as follows. Combined effects of chromium content, pH, temperature, dissolved oxygen (DO), flow velocity, test time, and kinds of amine on the FAC rate were described. 0.1 wt% chromium in steel did not affect the FAC rate with changes in pH. The FAC rates pronounced with higher flow rate and increased with increasing test duration(600 d) for 0.013 wt% chromium. The FAC rates in mixed amine chemistry were higher than in ammonia chemistry, which may be lessened by the addition of chromium to the steel.

• 한국표면공학회지
• /
• 제27권5호
• /
• pp.253-260
• /
• 1994

Ta-N films were reactively sputter deposited by dc magnetron sputtering from a Ta target with a various Ar-N, gas ratio. Electrical resistivity of pure Ta film was 150$\mu$$\Omega$cm and decreased initially with nitrogen addition, and then increased to a value of 220$\mu$$\Omega$-cm~260$\mu$$\Omega$-cm at 9%~23% nitrogen partial flow. Rutherford backscattering spectrometry(RBS) and Auger electron spectroscopy (AES) analysis show that nitrogen content in the film is increased with the nitrogen partial flow. The film contains 58at.% nitrogen at 36% nitrogen partial flow. Both the phase and the microstructure of the as-deposisted films were investigated by x-ray diffractometry(XRD) adn transmission electron microscopy (TEM) at various nitrogen content. The phase of pure Ta film is identified as $\beta$-Ta with a 200$\AA$~300$\AA$ grain size. The phase of Ta film is changed to bcc-Ta as small amount of nitrogen is added. Crystalline Ta2N film was deposited at 24at.% nitrogen content. Amorphous phase is formed over a range of nitrogen content from about 33at.% to 35at.% while crystalline fcc-TaN is observed to form at 39at.%~48at.% nitrogen content.