• Particle and aerosol research
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study is to assess respirable crystalline silica (RCS) exposure levels in workers who collect and dispose used coal briquette ash (CBA) in sanitation companies that are subcontracted by one medium-sized local government on the collection of municipal household waste (MHW), and to analyze the quartz content in CBA. When the CBA powder that undergone specialized pretreatment in several steps were subjected to mineral identification and quantitative analysis using X-ray diffraction (XRD), it was found that quartz represented 18%, and in addition, mullite, and plagioclase were included. For two CBA collectors, samples were collected by the personal sampling evaluation method. After respirable dust was collected in accordance with the National Institute for Occupational Safety and Health 7500 method, the concentration of quartz was analyzed using XRD. Meanwhile, a portable real-time dust monitor (Sidepak AM520, TSI Inc., USA) was also used to observe the dust exposure level for each time zone and job task. The RCS exposure level of one worker was as high as 0.024 mg/㎥, which was the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLV) level. The other worker also exhibited a concentration of 0.013 mg/㎥, which was more than half of TLV. The Sidepak results revealed that the work of collecting CBA and loading it onto a vehicle was hardly exposed to the dust of a significant level. It was found, however, that the work of transferring the collected CBA to a container through a conveyor belt was exposed to a very high average respirable dust concentration of 2.238 mg/㎥. The results of this study confirmed that quartz, which is crystalline silica and a carcinogen, is contained in CBA, one of municipal household waste (MHW), in high concentration. It was also confirmed that workers are exposed to high RCS concentrations while transferring collected CBA into a container. Although each local government in South Korea handles CBA in different ways, it is imperative to investigate the CBA exposure level of sanitation workers and improve their working conditions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.333-335
• /
• 2022

The changes caused by the 4th industrial revolution are accelerating the convergence of technologies due to the COVID-19 Pandemic. As a result, rapid changes are expected in various fields of society and industry. The shipping and logistics industry is also in urgent need of smartization due to changes in environment and technology. However, in the case of Korea, the smartization of shipping and logistics technology is insufficient compared to that of advanced countries. For smartization for complex business processing with many related entities, smooth communication and visual confirmation using the latest technologies are becoming important. Such visualization and communication will become more important in smart shipping and logistics This study intends to present an integrated communication tool between self-driving ships and container terminals for the realization of smart shipping and logistics. In particular, a study was conducted on the development of a digital twin-based communication tool that satisfies the requirements of ship berthing and loading/unloading operations in which various actors participate and process complex tasks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.573-581
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stacked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about $20\%$ compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.391-398
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stocked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about 20%compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.33-40
• /
• 2021

Currently, the shipping and port industries are implementing strategies to improve port processing capabilities through the expansion and efficient operation of port logistics resources to survive fierce competition with rapidly changing trends. The calculation of the port's processing capacity is determined by the loading and unloading equipment installed at the dock, and the port's processing capacity can be improved through various methods, such as additional deployment of logistics resources or efficient operation of resources in use. However, it is difficult to expect an improvement effect in a short period of time because the additional deployment of logistics resources is clearly limited in time is clear. Therefore, it is a feasible way to find an efficient operation method for resources being used to improve processing capacity. Domestic ports are also actively promoting informatization and digitalization with the development of the 4th industrial revolution technology. However, the calculation of the number of Y/T (Yard Tractor) assignments in the current unloading process depends on expert experience, and related previous studies also focus on the allocations of Y/T or Calculation of the total number of Y/T required. Therefore, this study analyzed the factors affecting the number of Y/T allocations using the loading and unloading information of incoming ships, and based on this, cluster analysis, regression analysis, and deep neural network(DNN) model were used.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.275-298
• /
• 2012

Terminal operators have provided special services such as loading, discharging, stowage of cargo to the owner, and carriers of the sea, which contribute the domestic and international logistics. For smooth flow of logistics, container terminal should reserve spaces for inbound and outbound logistics. However, if it is unable to provide the spaces, which can be caused by labour strikes or terminal lockouts and so on, national logistic system and financial management of terminal operators can be seriously affected. In order to minimize these kinds of problems, terminal operators impose high rate of charges ("overstorage charge") to the accumulated cargoes and/or containers, which are stipulated in terminal service agreement. Nevertheless, if there is no terminal service agreement with an owner of cargo and/or container, any kind of charge can cause legal problems (conflict ??) between the cargo and terminal operator. In this regard, I would like to study on the definition of overstorage charge and the legal issue of it based on the Busan district court's judgment. In particular, I will propose a special right of commercial lien and public auction for terminal operators to settle accumulated cargoes in container terminal.

• Journal of Intelligence and Information Systems
• /
• v.11 no.2
• /
• pp.59-79
• /
• 2005

Export containers in a container terminal are usually classified into a few weight groups and those belonging to the same group are placed together on a same stack. The reason for this stacking by weight groups is that it becomes easy to have the heavier containers be loaded onto a ship before the lighter ones, which is important for the balancing of the ship. However, since the weight information available at the time of container arrival is only an estimate, those belonging to different weight groups are often stored together on a same stack. This becomes the cause of extra moves, or rehandlings, of containers at the time of loading to fetch out the heavier containers placed under the lighter ones. In this paper, we use machine learning techniques to derive a classifier that can classify the containers into the weight groups with improved accuracy. We also show that a more useful classifier can be derived by applying a cost-sensitive learning technique, for which we introduce a scheme of searching for a good cost matrix. Simulation experiments have shown that our proposed method can reduce about 5$\sim$7% of rehandlings when compared to the traditional weight grouping method.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.1 s.12
• /
• pp.65-75
• /
• 2004

Roadbed failure due to the natural disaster may bring out social and economic damage such as the loss of life and property, the consumption of time and cost for recovery, and the delay of logistics in railway In this study, the method using geosynthetic soilbag was applied to rehabilitation of the railway roadbed which was failed by disaster. The full scale tests with the simulated train loading were performed in order to evaluate the static and dynamic performance at the railway roadbed using geosynthetic soilbag. The results of these tests were compared with unreinforced and reinforced cases with geosynthetic soilbag, respectively The data gathered by various measurement devices from these full scale tests would be useful to evaluate and understand the roadbed with geosynthetic soilbag. In conclusion, geosynthetic soilbag was evaluated as a permanent restoration method to reinforce the roadbed of railway.

• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.271-279
• /
• 2010

The Mobile Harbor(MH) is a new transportation platform that can load and unload containers to and from very large container ships in the sea. This loading and unloading by crane can be performed with only very small movements of the MH in waves because MH is operated outside of the harbor. For this reason, an anti-rolling tank(ART) and an active mass driving system(AMD) were designed to reduce MH's roll motion, especially at the natural frequency of MH. In the conceptual design stage, it is difficult to confirm the design result of theses anti-rolling devices without modeling and simulation tools. Therefore, the coupled MH and anti-rolling devices' dynamic equations in waves were derived and a simulation program that can analyze the roll reduction performance in various conditions, such as sea state, wave direction, and so on, was developed. The coupled equations are constructed as an eight degrees of freedom (DOF) motion that consists of MH's six DOF dynamics and the ART's and AMD's control variables. In order to conveniently include the ART's and AMD's control dynamics in the time domain, MH's radiated wave force was described by an impulse response function derived by the damping coefficient obtained in the frequency domain, and wave exciting forces such as Froude-Krylov force and diffraction force and nonlinear buoyancy were calculated at every simulation time interval. Finally, the roll reduction performances of the designed anti-rolling devices were successfully assessed in the various loading and wave conditions by using a developed simulation program.