• Current Photovoltaic Research
• /
• 제9권3호
• /
• pp.84-95
• /
• 2021

The power conversion efficiency of Cu₂ZnSnSe₄ (CZTSe) solar cells depends on the absorber layer thickness; however, changes in the characteristics of the cells with varying absorber layer thickness are unclear. In this study, we investigated the changes in the characteristics of CZTSe solar cells for varying absorber layer thickness. Five absorber thicknesses were employed: CZTSe1 2.78 ㎛, CZTSe2 1.01 ㎛, CZTSe3 0.55 ㎛, CZTSe4 0.29 ㎛, and CZTSe5 0.15-0.23 ㎛. The efficiency of the CZTSe solar cells decreased as the absorber thickness decreased, resulting in power conversion efficiencies of 10.45% (CZTSe1), 8.67% (CZTSe2), 7.14% (CZTSe3), 3.44% (CZTSe4), and 1.54% (CZTSe5). As the thickness of the CZTSe absorber layer decreased, the electron-hole recombination at the grain boundaries and the absorber-back-contact interface increased. This caused an increase in the current loss, owing to light loss in the long-wavelength region. In addition, as the thickness of the CZTSe absorber layer decreased, more ZnSe was produced, and the resulting defects and defect clusters led to an open-circuit voltage loss.

• 공업화학
• /
• 제22권1호
• /
• pp.26-30
• /
• 2011

염료 감응형 태양전지의 에너지 전환 효율을 향상시키고자 $TiO_2$에 $WO_3$을 첨가하여 광전극을 제조하고 그 전기화학적 특성 평가를 하였다. 또한 $WO_3$가 첨가된 $TiO_2$를 회쇄함으로써 회쇄 효과가 전지효율에 미치는 영향을 고찰하였다. I-V 곡선을 통하여 측정된 염료 감응형 태양전지의 효율은 $WO_3$ 첨가 및 회쇄 효과에 의하여 2.8에서 6.0%로 크게 증가하였다. 이와 같은 결과는 $TiO_2$의 전도대에서 전달되는 전자가 염료 및 전해질과 재결합되기 전에 $TiO_2$의 전도대보다 낮은 $WO_3$의 전도대를 통해 전달되기 때문에 전체 전류의 양이 증가되어 효율이 증가한 것으로 여겨진다. 또한, 임피던스 결과로부터 $TiO_2$/염료/전해질 계면의 저항 값이 감소하는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.327-332
• /
• 2021

패키지레벨에서 반도체의 신뢰성 검사는 테스트 소켓에 반도체 칩 패키지를 탑재시킨 상태에서 테스트가 진행되며, 테스트 소켓은 기본적으로 반도체 칩 패키지의 형태에 따라서 그 모양이 결정되는 것이 일반적이다. 또한, 반도체 칩 패키지의 리드와 소켓 리드의 기계적인 접촉에 의해 테스트 장비와 연결하는 매개체의 역할을 하며, 신호전달 과정에서 신호의 손실을 최소화하여 반도체에 검사신호를 잘 전달할 수 있도록 하는 기능이 핵심이다. 본 연구에서는 이웃하고 있는 전기 전달 경로의 상호 영향성을 검사 할 수 있는 기술을 적용함으로써 수명 검사와 정밀 측정뿐만 아니라 이웃하고 있는 전기 전달 경로의 구조를 포함하여 단 한 번의 접촉을 통해 100개미만의 실리콘 테스트 소켓의 합선 테스트가 가능하도록 개발하였다. 개발된 장치의 테스트 결과 99%이상의 테스트 정밀도와 0.66이하의 동시 검사속도 특성을 나타내었다.

• 동의생리병리학회지
• /
• 제34권5호
• /
• pp.269-278
• /
• 2020

The purpose of this study is to report the effect of the Korean acupuncture treatment and Open Wet Dressing Therapy(OPWT) for pressure ulcer. From November 2015 to January 2020, 9 patients with 3rd or 4th graded pressure ulcer over 70 years of age who were admitted to a care hospital with underlying diseases such as cerebral infarction, brain hemorrhage, and Parkinson's disease were treated by acupuncture and OPWT. Photographs of lesions were used to evaluate the changes in condition of pressure ulcer. Acupuncture was performed 4 times a week along the border between the normal epidermal region and the pressure ulcer granulation tissue in contact with the pressure ulcer interface. OPWT to create a wet environment for wounds by washing the wounds 1-2 times a day with normal saline solution and covering them with food wrap was combined. In addition, for objective treatment progress evaluation, size, stage and condition of pressure ulcer were regularly monitored using the classification method of The National Pressure Ulcer Advisory Panel (NPUAP) according to the condition and depth of the damaged tissue and The Pressure Ulcer Scale for Healing(PUSH tool 3.0). After acupuncture treatment and OPWT, the pressure ulcer of patients was cured in as short as 66 days and as long as 274 days (average 170 days). This study shows that acupuncture treatment and OPWT were effective to treat pressure ulcer.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.341-347
• /
• 2022

This research is designed to help and offer hold up to complete the requirements of aged and disable in a home. The control approach and the tone approach are used to manage the house appliances. The major organize system implementation in technology of wireless to offer distant contact from a phone Internet Protocol connectivity for access and calculating strategy and appliance remotely. The planned system no need a committed server PC with value of parallel systems and offers a new communication-protocol to observe and control a house environment with more than just the switch functionality. To express the possibility and efficiency of this system, devices like as lights switches, power plugs, and motion-sensors have been included with the planned home control system and supply more security manage on the control with low electrical energy activate method. The rank of switches is corresponding in all this control system whereby all user interfaces indicate the real time existing status. This system planned to manage electrical-appliances and devices in house with reasonably low cost of design, user friendly interface, easily install and provide high security. Research community generally specified that the network "Reconnaissance Attacks" in IPv6 are usually impossible due to they will take huge challenge to carry out address scanning of 264 hosts in an IPv6 subnet."It being deployed of IPv6 shows that it definitely enhances security and undermines the probability". This research of the IPv6 addressing-strategies at present utilizes and planned a new strategy and move toward to "mitigate reconnaissance attacks".

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권2호
• /
• pp.133-140
• /
• 2021

This study aims to analyze the quality and satisfaction of healthcare perceived by patients using hospitals and to provide basic data necessary for expanding and settling Vietnamese healthcare services by analyzing the impact on recommendation intentions. The research method selected one hospital in Vietnam and collected data from patients using the hospital and used a total of 286 effective samples as data for hypothesis verification. The research model and hypothesis verification were analyzed with the statistical data from SPSS and AMOS. The findings show that, first, tangibility, accessibility, and reliability all have a positive effect on the quality of healthcare. Second, it has been shown that only accessibility among the quality of healthcare has a positive effect on recommendation intentions. Third, customer satisfaction has been shown to have a positive effect on recommendation intentions. Fourth, when looking at the mediating effect, reliability among the quality of healthcare was shown as a full-mediated effect, but accessibility was shown to have a partial mediating effect and tangibility to have no mediating effect. Contact management is important because customer satisfaction is highly regarded when customers feel positive emotions at the interface from the provision of convenience facilities that support medical services to the reduction of waiting time for patients, employees kindness, treatment, medication, and inspection. It is also confirmed that the demand for convenient and rapid use of hospitals is increasing in Vietnam. In addition, if customer satisfaction is increased through friendly medical staff's response, the intention of recommendation will be even greater.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.508-514
• /
• 2022

Piezoelectric composite films which are enabled by inorganic piezoelectric nanomaterials-embedded polymer, have attracted enormous attention as a sustainable power source for low powered electronics, because of their ease of fabrication and flexible nature. However, the absorption of applied stress by the soft polymeric matrices is a major issue that must be solved to expand the fields of piezoelectric composite applications. Herein, a flexible and porous piezoelectric composite (piezoelectric sponge) comprised of BaTiO₃ nanoparticles and polydimethylsiloxane was developed using template method to enhance the energy conversion efficiency by minimizing the stress that vanishes into the polymer matrix. In the porous structure, effective stress transfer can occur between the piezoelectric active materials in compression mode due to direct contact between the ceramic particles embedded in the pore-polymer interface. The piezoelectric sponge with 30 wt% of BaTiO₃ particles generated an open-circuit voltage of ~12 V and a short-circuit current of ~150 nA. A finite element method-based simulation was conducted to theoretically back up that the piezoelectric output performance was effectively improved by introducing the sponge structure. Furthermore, to demonstrate the feasibility of pressure detecting applications using the BaTiO₃ particles-embedded piezoelectric sponge, the composite was arranged in a 3 × 3 array and integrated into a single pressure sensor. The fabricated sensor array successfully detected the shape of the applied pressure. This work can provide a cost-effective, biocompatible, and structural strategy for realizing piezoelectric composite-based energy harvesters and self-powered sensors with improved energy conversion efficiency.

• Computers and Concrete
• /
• 제29권4호
• /
• pp.219-235
• /
• 2022

Strengthening slender reinforced concrete (RC) columns is a challenge. They are susceptible to overall buckling that induces bending moment and axial compression. This study presents the precise three-dimensional finite element modeling of slender RC columns strengthened with fiber-reinforced polymer (FRP) composites sheets with various patterns under concentric or eccentric compression. The slenderness ratio λ (height/width ratio) of the studied columns ranged from 15 to 35. First, to determine the optimal modeling procedure, nine alternative nonlinear finite element models were presented to simulate the experimental behavior of seven FRP-strengthened slender RC columns under eccentric compression. The models simulated concrete behavior under compression and tension, FRP laminate sheets with different fiber orientations, crack propagation, FRP-concrete interface, and eccentric compression. Then, the validated modeling procedure was applied to simulate 58 FRP-strengthened slender RC columns under compression with minor eccentricity to represent the inevitable geometric imperfections. The simulated columns showed two cross sections (square and rectangular), variable λ values (15, 22, and 35), and four strengthening patterns for FRP sheet layers (hoop H, longitudinal L, partial longitudinal L_w, and longitudinal coupled with hoop LH). For λ=15-22, pattern L showed the highest strengthening effectiveness, pattern L_w showed brittle failure, steel reinforcement bars exhibited compressive yielding, ties exhibited tensile yielding, and concrete failed under compression. For λ>22, pattern L_w outperformed pattern L in terms of the strengthening effectiveness relative to equivalent weight of FRP layers, steel reinforcement bars exhibited crossover tensile strain, and concrete failed under tension. Patterns H and LH (compared with pattern L) showed minor strengthening effectiveness.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.362-368
• /
• 2022

The application of polymer composite electrolyte in all-solid-state lithium-sulfur battery (ASSLSBs) can guarantee high energy density and improve the interface contact between electrolyte and electrode, which has a broader application prospect. However, the inherent insulation of the sulfur-cathode leads to a low electron/ion transfer rate. Carbon materials with high electronic conductivity and electrolyte materials with high ionic conductivity are usually selected to improve the electron/ion conduction of the composite cathode. In this work, PEO-LiTFSI-LLZO composite polymer electrolyte (CPE) with high ionic conductivity was prepared. The ionic conductivity was 1.16×10^-4 and 7.26×10^-4 S cm^-1 at 20 and 60℃, respectively. Meanwhile, the composite sulfur cathode was prepared with Sulfur, reduced graphene oxide and composite polymer electrolyte slurry (S-rGO-CPEs). In addition to improving the ion conductivity in the cathode, CPEs also replaces the role of binder. The influence of different contents of CPEs in the cathode material on the performance of the constructed battery was investigated. The results show that the electrochemical performance of the all-solid-state lithium-sulfur battery is the best when the content of the composite electrolyte in the cathode is 40%. Under the condition of 0.2C and 45℃, the charging and discharging capacity of the first cycle is 923 mAh g^-1, and the retention capacity is 653 mAh g^-1 after 50 cycles.

• Advances in nano research
• /
• 제14권4호
• /
• pp.363-373
• /
• 2023

A novel type of steel fiber with a rounded-end shape is presented to improve the bonding behavior of fibers with Carbon Nanotubes (CNT)-reinforced Ultra-High Performance Concrete (UHPC) matrix. For this purpose, by performing a parametric study and using the nonlinear finite element method, the impact of geometric characteristics of the fiber end on its bonding behavior with UHPC has been studied. The cohesive zone model investigates the interface between the fibers and the cement matrix. The mechanical properties of the cohesive zone model are determined by calibrating the finite element results and the experimental fiber pull-out test. Also, the results are evaluated with the straight steel fibers outcomes. Using the novel presented fibers, the bond strength has significantly improved compared to the straight steel fibers. The new proposed fibers increase bond strength by 1.1 times for the same diameter of fibers. By creating fillet at the contact area between the rounded end and the fiber, bond strength is significantly improved, the maximum fiber capacity is reachable, and the pull-out occurs in the form of fracture and tearing of the fibers, which is the most desirable bonding mode for fibers. This also improves the energy absorbed by the fibers and is 4.4 times more than the corresponding straight fibers.