Browse > Article
http://dx.doi.org/10.21218/CPR.2021.9.3.084

Secondary Phase and Defects in Cu2ZnSnSe4 Solar Cells with Decreasing Absorber Layer Thickness  

Kim, Young-Ill (Research Center for Thin Film Solar Cells, DGIST)
Son, Dae-Ho (Research Center for Thin Film Solar Cells, DGIST)
Lee, Jaebaek (Research Center for Thin Film Solar Cells, DGIST)
Sung, Shi-Joon (Research Center for Thin Film Solar Cells, DGIST)
Kang, Jin-Kyu (Research Center for Thin Film Solar Cells, DGIST)
Kim, Dae-Hwan (Research Center for Thin Film Solar Cells, DGIST)
Yang, Kee-Jeong (Research Center for Thin Film Solar Cells, DGIST)
Publication Information
Current Photovoltaic Research / v.9, no.3, 2021 , pp. 84-95 More about this Journal
Abstract
The power conversion efficiency of Cu2ZnSnSe4 (CZTSe) solar cells depends on the absorber layer thickness; however, changes in the characteristics of the cells with varying absorber layer thickness are unclear. In this study, we investigated the changes in the characteristics of CZTSe solar cells for varying absorber layer thickness. Five absorber thicknesses were employed: CZTSe1 2.78 ㎛, CZTSe2 1.01 ㎛, CZTSe3 0.55 ㎛, CZTSe4 0.29 ㎛, and CZTSe5 0.15-0.23 ㎛. The efficiency of the CZTSe solar cells decreased as the absorber thickness decreased, resulting in power conversion efficiencies of 10.45% (CZTSe1), 8.67% (CZTSe2), 7.14% (CZTSe3), 3.44% (CZTSe4), and 1.54% (CZTSe5). As the thickness of the CZTSe absorber layer decreased, the electron-hole recombination at the grain boundaries and the absorber-back-contact interface increased. This caused an increase in the current loss, owing to light loss in the long-wavelength region. In addition, as the thickness of the CZTSe absorber layer decreased, more ZnSe was produced, and the resulting defects and defect clusters led to an open-circuit voltage loss.
Keywords
CZTSe; Thin-film solar cell; Ultrathin absorber; Secondary phase; Open circuit voltage deficit;
Citations & Related Records
연도 인용수 순위
  • Reference
1 K. Kushiya, M. Ohshita, I. Hara, Y. Tanaka, B. Sang, Y. Nagoya, M. Tachiyuki, O. Yamase, "Yield issues on the fabrication of 30 cm x 30 cm sized Cu(In,Ga)Se2-based thinfilm modules," Sol. Energy Mater. Sol. Cells, Vol. 75, pp. 171-178 (2003).   DOI
2 S. -Y. Kim, S. -H. Kim, S. Hong, D. -H. Son, Y. -I. Kim, S. Kim, K. Ahn, K. -J. Yang, D. -H. Kim, J. -K. Kang, "Secondary phase formation mechanism in the Mo-back contact region during sulfo-selenization using a metal precursor: effect of wettability between a liquid metal and substrate on secondary phase formation," ACS Appl. Mater. Interfaces, Vol. 11, pp. 23160-23167 (2019).   DOI
3 S. Chen, A. Walsh, X. G. Gong, S. H. Wei, "Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers," Adv. Mater., Vol. 25, pp. 1522-1539 (2013).   DOI
4 G. Yin, V. Brackmann, V. Hoffmann, M. Schmid, "Enhanced performance of ultra-thin Cu(In,Ga)Se2 solar cells deposited at low process temperature," Sol. Energy Mater. Sol. Cells, Vol. 132, pp. 142-147 (2015).   DOI
5 S. Yang, J. Zhu, X. Zhang, X. Ma, H. Luo, L. Yin, X. Xiao, "Bandgap optimization of submicron-thick Cu(In,Ga)Se2 solar cells," Prog. Photovolt.: Res. Appl., Vol. 23, pp. 1157-1163 (2015).   DOI
6 J. Malmstrom, S. Schleussner, L. Stolt, "Enhanced back reflectance and quantum efficiency in Cu(In,Ga)Se2 thin film solar cells with a ZrN back reflector," Appl. Phys. Lett., Vol. 85, pp. 2634-2636 (2004).   DOI
7 J. K. Larsen, H. Simchi, P. Xin, K. Kim, W. N. Shafarman, "Backwall superstrate configuration for ultrathin Cu(In,Ga)Se2 solar cells," Appl. Phys. Lett., Vol. 104, 033901 (2014).   DOI
8 J. Pettersson, T. Torndahl, C. Platzer-Bjorkman, A. Hultqvist, M. Edoff, "The influence of absorber thickness on Cu(In,Ga)Se2 solar cells with different buffer layers," IEEE J. Photovoltaics, Vol. 3, pp. 1376-1382 (2013).   DOI
9 Y. Ren, J. J. S. Scragg, C. Frisk, J. K. Larsen, S. -Y. Li, C. Platzer-Bjorkman, "Influence of the Cu2ZnSnS4 absorber thickness on thin film solar cells," Phys. Status Solidi A, Vol. 212, pp. 2889-2896 (2015).   DOI
10 J. Song, S. S. Li, C. H. Huang, O. D. Crisalle, T. J. Anderson, "Device modeling and simulation of the performance of Cu(In1-x,Gax)Se2 solar cells," Solid-State Electron., Vol. 48, pp. 73-79 (2004).   DOI
11 D. -H. Son, S. -H. Kim, S. -Y. Kim, Y. -I. Kim, J. -H. Sim, S. -N. Park, D. -H. Jeon, D. -K. Hwang, S. -J. Sung, J. -K. Kang, K. -J. Yang, D. -H. Kim, "Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device," J. Mater. Chem. A, Vol. 7, pp. 25279-25289 (2019).   DOI
12 H. S. Duan, W. Yang, B. Bob, C. J. Hsu, B. Lei, Y. Yang, "The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties," Adv. Funct. Mater., Vol. 23, pp. 1466-1471 (2013).   DOI
13 B. D. Anderson, J. B. Tracy, "Nanoparticle conversion chemistry: Kirkendall effect, galvanic exchange, and anion exchange," Nanoscale, Vol. 6, pp. 12195-12216 (2014).   DOI
14 J. T. Watjen, J. J. Scragg, T. Ericson, M. Edoff, C. PlatzerBjorkman, "Secondary compound formation revealed by transmission electron microscopy at the Cu2ZnSnS4/Mo interface," Thin Solid Films, Vol. 535, pp. 31-34 (2013).   DOI
15 B. Shin, O. Gunawan, Y. Zhu, N. A. Bojarczuk, S. J. Chey, S. Guha, "Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber," Prog. Photovolt.: Res. Appl., Vol. 21, pp. 72-76 (2013).   DOI
16 C. Wadia, A. P. Alivisatos, D. M. Kammen, "Materials availability expands the opportunity for large-scale photovoltaics deployment," Environ. Sci. Technol., Vol. 45, pp. 2072-2077 (2009).   DOI
17 K. -J. Yang, J. -H. Sim, D. -H. Son, Y. -I. Kim, D. -H. Kim, D. Nam, H. Cheong, S. Kim, J. Kim, J. -K. Kang, "Precursor designs for Cu2ZnSn(S,Se)4 thin-film solar cells," Nano Energy, Vol. 35, pp. 52-61 (2017).   DOI
18 M. T. Winkler, W. Wang, O. Gunawan, H. J. Hovel, T. K. Todorov, D. B. Mitzi, "Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells," Energy Environ. Sci., Vol. 7, pp. 1029-1036 (2014).   DOI
19 C. J. Hages, N. J. Carter, R. Agrawal, T. Unold, "Generalized current-voltage analysis and efficiency limitations in non-ideal solar cells: Case of Cu2ZnSn(SxSe1-x)4 and Cu2Zn(SnyGe1-y) (SxSe1-x)4," J. Appl. Phys., Vol. 115, 234504 (2014).   DOI
20 M. Powalla, B. Dimmler, "Scaling up issues of CIGS solar cells," Thin Solid Films, Vol. 361-362, pp. 540-546 (2000).   DOI
21 J. J. Scragg, "Copper zinc tin sulfide thin films for photovoltaics" (Springer, New York, 2011).
22 K. -J. Yang, S. Kim, J. -H. Sim, D. -H. Son, D. -H. Kim, J. Kim, W. Jo, H. Yoo, J. Kim, J. -K. Kang, "The alterations of carrier separation in kesterite solar cells," Nano Energy, Vol. 52, pp. 38-53 (2018).   DOI
23 J. J. Scragg, J. T. Watjen, M. Edoff, T. Ericson, T. Kubart, C. Platzer-Bjorkman, "A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells," J. Am. Chem. Soc., Vol. 134, pp. 19330-19333 (2012).   DOI
24 J. Kim, G. Y. Kim, D. -H. Son, K. -J. Yang, D. -H. Kim, J. -K. Kang, W. Jo, "High photo-conversion efficiency Cu2ZnSn(S,Se)4 thin-film solar cells prepared by compound-precursors and metalprecursors," Sol. Energy Mater. Sol. Cells, Vol. 183, pp. 129-136 (2018).   DOI
25 W. Wang, M. T. Winkler, O. Gunawan, T. Gokmen, T. K. Todorov, Y. Zhu, D. B. Mitzi, "Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency," Adv. Energy Mater., Vol. 4, 1301465 (2014).   DOI
26 K. -J. Yang, J. -H. Sim, D. -H. Son, D. -H. Kim, G. Y. Kim, W. Jo, S. Song, J. Kim, D. Nam, H. Cheong, J. -K. Kang, "Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4 solar cells," Prog. Photovolt.: Res. Appl., Vol. 23, pp. 1771-1784 (2015).   DOI
27 K. -J. Yang, D. -H. Son, S. -J. Sung, J. -H. Sim, Y. -I. Kim, S. -N. Park, D. -H. Jeon, J. Kim, D. -K. Hwang, C. -W. Jeon, D. Nam, H. Cheong, J. -K. Kang, D. -H. Kim, "A band-gap-graded CZTSSe solar cell with 12.3% efficiency," J. Mater. Chem. A, Vol. 4, pp. 10151-10158 (2016).   DOI
28 K. -J. Yang, S. Kim, S. -Y. Kim, K. Ahn, D. -H. Son, S. -H. Kim, S. -J. Lee, Y. -I. Kim, S. -N. Park, S. -J. Sung, D. -H. Kim, T. Enkhbat, J. Kim, C. -W. Jeon. J. -K. Kang, "Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area," Nat. Comm., Vol. 10, 2959 (2019).   DOI
29 F. Liu, J. Huang, K. Sun, C. Yan, Y. Shen, J. Park, A. Pu, F. Zhou, X. Liu, J. A. Stride, M. A. Green, X. Hao, "Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact," NPG Asia Mater., Vol. 9, e401 (2017).   DOI
30 S. -Y. Kim, D. -H. Son, Y. -I. Kim, S. -H. Kim, S. Kim, K. Ahn, S. -J. Sung, D. -K. Hwang, K. -J. Yang, J. -K. Kang, D. -H. Kim, "Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursors," Nano Energy, Vol. 59, pp. 399-411 (2019).   DOI
31 B. Shin, N. A. Bojarczuk, S. Guha, "On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact," Appl. Phys. Lett., Vol. 102, 091907 (2013).   DOI
32 Y. Hou, H. Azimi, N. Gasparini, M. Salvador, W. Chen, L. S. Khanzada, M. Brandl, R. Hock, C. J. Brabec, "Low-temperature solution-processed kesterite solar cell based on in situ deposition of ultrathin absorber layer," ACS Appl. Mater. Interfaces, Vol. 7, pp. 21100-21106 (2015).   DOI
33 J. J. Scragg, P. J. Dale, D. Colombara, L. M. Peter, "Thermodynamic aspects of the synthesis of thin-film materials for solar cells," ChemPhysChem, Vol. 13, pp. 3035-3046 (2012).   DOI
34 B. Vermang, J. T. Watjen, V. Fjallstrom, F. Rostvall, M. Edoff, R. Kotipalli, F. Henry, D. Flandre, "Employing Si solar cell technology to increase efficiency of ultra-thin Cu(In,Ga)Se2 solar cells," Prog. Photovolt.: Res. Appl., Vol. 22, pp. 1023-1029 (2014).   DOI
35 A. Cazzaniga, A. Crovetto, C. Yan, K. Sun, X. Hao, J. R. Estelrich, S. Canulescu, E. Stamate, N. Pryds, O. Hansen, J. Schou, "Ultra-thin Cu2ZnSnS4 solar cell by pulsed laser deposition," Sol. Energy Mater. Sol. Cells, Vol. 166, pp. 91-99 (2017).   DOI
36 P. Jackson, R. Wuerz, D. Hariskos, E. Lotter, W. Witte, M. Powalla, "Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%," Phys. Status Solidi RRL, Vol. 10, pp. 583-586 (2016).   DOI
37 C. v. Lare, G. Yin, A. Polman, M. Schmid, "Light coupling and trapping in ultrathin Cu(In,Ga)Se2 solar cells using dielectric scattering patterns," ACS Nano, Vol. 9, pp. 9603-9613 (2015).   DOI
38 S. Niki, M. Contreras, I. Repins, M. Powalla, K. Kushiya, S. Ishizuka, K. Matsubara, "CIGS absorbers and processes," Prog. Photovolt.: Res. Appl., Vol. 18, pp. 453-466 (2010).   DOI
39 A. Campa, J. Krc, J. Malmstrom, M. Edoff, F. Smole, M. Topic, "The potential of textured front ZnO and flat TCO/metal back contact to improve optical absorption in thin Cu(In,Ga)Se2 solar cells," Thin Solid Films, Vol. 515, pp. 5968-5972 (2007).   DOI
40 Y. S. Lee, T. Gershon, O. Gunawan, T. K. Todorov, T. Gokmen, Y. Virgus, S. Guha, "Cu2ZnSnSe4 thin-film solar cells by thermal coevaporation with 11.6% efficiency and improved minority carrier diffusion length," Adv. Energy Mater., Vol. 5, 1401372 (2015).   DOI
41 T. Hara, T. Maekawa, S. Minoura, Y. Sago, S. Niki, H. Fujiwara, "Quantitative assessment of optical gain and loss in submicron-textured CuIn1-xGaxSe2 solar cells fabricated by three-stage coevaporation," Phys. Rev. Applied, Vol. 2, 034012 (2014).   DOI
42 M. Gloeckler, J. R. Sites, "Potential of submicrometer thickness solar cells," J. Appl. Phys., Vol. 98, 103703 (2005).   DOI
43 U. Rau, "Tunneling-enhanced recombination in Cu(In,Ga)Se2 heterojunction solar cells," Appl. Phys. Lett., Vol. 74, pp. 111-113 (1999).   DOI
44 B. Vermang, V. Fjallstrom, J. Pettersson, P. Salome, M. Edoff, "Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts," Sol. Energy Mater. Sol. Cells, Vol. 117, pp. 505-511 (2013).   DOI
45 M. Troviano, K. Taretto, "Analysis of internal quantum efficiency in double-graded bandgap solar cells including sub-bandgap absorption," Sol. Energy Mater. Sol. Cells, Vol. 95, pp. 821-828 (2011).   DOI