• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.73-81
• /
• 2014

The present study was carried out to assess exposure and risk to thiophanate-methyl wettable powder for agricultural worker during mixing/loading and application with power sprayer in green pepper, cucumber and apple fields. Dermal exposure was measured with patches, gloves, socks and masks, while inhalation exposure was evaluated with personal air pump and solid sorbent. Those methods were full validated before experiment. During mixing/loading, dermal exposure amount in green pepper, cucumber and apple fields was $24.0{\pm}6.7$, $4.5{\pm}1.5$ and $18.5{\pm}0.6mg$, corresponding to mean 0.007, 0.001 and 0.005% of prepared active ingredient, respectively. The major exposed part for mixer/loader was hands (78-92%). Dermal exposure amount for applicator in green pepper, cucumber and apple fields was $84.9{\pm}14.0$, $34.0{\pm}20.8$ and $30.7{\pm}9.1mg$, corresponding to mean 0.024, 0.016 and 0.013% of applied active ingredient, respectively. The main body parts of exposure in apple field were hands, while thighs and shins in other fields. Inhalation exposure amount in green pepper, cucumber and apple fields was $1.5{\pm}2.2$, $52.7{\pm}48.9$ and $4.0{\pm}4.9{\mu}g$ during mixing/loading and $0.2{\pm}0.1$, $23.2{\pm}12.4$ and $0.4{\pm}0.6{\mu}g$ for applicator, respectively. These results were suggested that main factors affecting dermal exposure were contact frequency to the plants, foliage density, hygienic behavior, work type, and working environment, while inhalation exposure was affected mainly by working environment, especially wind. In risk assessment, margin of safety for thiophanate-methyl in all cases was over 1. However, during application in green pepper field, margin of safety was close to 1.

• Journal of agricultural medicine and community health
• /
• v.26 no.2
• /
• pp.111-132
• /
• 2001

This study was conducted to examine the therapeutic compliance and its related factors in rural women with osteoporosis. A questionnaire survey was performed from April to May in 2000 for 140 osteoporotic patients who were diagnosed from April to June in 1999 through community health program. The study employed the health belief model for predicting and explaining sick role behavior. The analysis techniques employed included contingency table analysis and path analysis using LISREL. The major results of this study were as follows: Of the subjects, 12.1% were continuously complaint, 53.6% were intermittently compliant, and 34.3% were non- compliant to calcium supplement therapy. As the result of path analysis, the therapeutic compliance was significantly higher(${\mid}T{\mid}$ >2.0) as patients had higher perceived severity of disease, lower perceived barriers of treatment, and when patients thought their disease status as severe. As the patients had higher educational level, more experience of mass media contact or health education about osteoporosis, and when family had more concern for patient treatment, they had higher perceived susceptibility of complication(bone fracture)${\mid}T{\mid}$ >2.0). The patients had higher perceived severity(${\mid}T{\mid}$ >2.0) as they had more educational level, more advice for treatment from their doctors, and when family had more concern for their treatment. As the patients had more advice for treatment from their doctors and when family had more concern for their treatment, they had higher perceived benefit of treatment and lower perceived barriers to treatment(${\mid}T{\mid}$ >2.0). In order to improve the therapeutic compliance in rural osteoporotic women, it would be necessary that the patient should recognize their disease severity properly. And the perceived barriers should be removed through supportive environments for osteoporosis treatment such as doctor 's more advice and family 's more concern for treatment. In addition, effective and continuous management system for osteoporotic patients should be established.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.511-515
• /
• 2012

In this study, we used a commercial simulator to investigate the gasification characteristics of Roto coal in the partitioned fluidized-bed gasifier, which consists of 4 parts such as coal pyrolysis, char gasification, tar/oil gasification and char combustion. The heating medium was exchanged between the combustion part and the gasification part in order to supply the energy needed for pyrolysis and gasification. The correlation model from experimental data in relation to the reaction temperatures, the reaction gases and the coal feed rates was derived for the coal pyrolysis. The equilibrium model was used for the gasification and the combustion model for the char combustion. In order to compare the reaction behavior of the partitioned fluidized-bed gasifier, the single-bed gasifier was also simulated. The cold gas efficiency of both partitioned fluidized-bed gasifier and single-bed gasifier was almost the same. The $H_2$ and $CH_4$ contents of the syngas in the partitioned fluidized-bed gasifier slightly increased and the CO and $CO_2$ contents slightly decreased, compared with the singlebed gasifier. In order to verify the model, ten cases of the single-bed gasification experiment have been simulated. The contents of CO, $CO_2$, $CH_4$ in the syngas from the simulation corresponded with the experimental data while those of $H_2$ was slightly higher than experimental data, but the tendency of $H_2$ content in the syngas was similar to the experiments. In the coal conversion, the simulation results were higher than the experiments since equilibrium model was used for the gasification so that the residence time and contact time in the model is different from the experiments.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.1
• /
• pp.109-125
• /
• 2001

The purpose of this study was to provide the basic data for establishing school education environment protection measures, on the basis of comparing and analyzing the realities and students' recognition degree of the environment and hygiene around the middle and high schools located in the rural areas. These study data were investigated by the self-administered questionnaires, taking as subject the 805 students in the middle and high schools located rural areas. And the results were as follows: First, as the result of having investigated the distribution degree of harmful environment within the purification zone around schools, it was found out that students responded: within the purification zone around the middle school, there were cartoon rooms (46.2％), electronic game rooms (45.9％), and singing rooms (45.0％). within the purification zone around the high school, there were electronic game rooms (46.3％), singing rooms (42.3％), billiard halls (41.4％), PC rooms (40.1 ％), and Soju-room (35.2％). Secondly, as having analyzed student's recognition degree of the harmful environment around the school, it was found out that middle school students responded that sexual utensils-treating shops (3.74 points) were most harmful, and next corrupted bathhouses (3.52 points), and Soju-room (3.47 points), and high school students also responded relating to harmfulness in a similar sequence. Thirdly, in case of students' recognition degree of the harmful environment around the school according to general characteristics, 1) girl students had a higher ratio of recognition that the environment around the school was harmful than boy students (p〈0.001). 2) groups of students whose living standard was high had a higher ratio of recognition that the environment around the school was harmful than groups of students whose living standard was low (p〈0.05). 3) groups of students whose school was located near the park or the residential street had a higher degree of recognition that the environment around the school was harmful than groups of students whose school was located near the factory or the shopping area (p〈0.01). 4) groups of students whose school was located near the park or the residential street had a higher degree of recognition that the environment around the school was harmful than groups of students whose school was located near the amusement area or the shopping area (p〈0.05). Fourthly, 1) relating to the harmful shops where they experienced most highly the behavior of drinking and smoking, middle school students responded that they did so in the electronic game room (22.5％) and high school students did so in the singing room (31.4％), and high school students had a very high experience ratio of drinking and smoking, compared with middle school students (p〈0.001). 2) relating to the harmful shops where they could get in contact with lewd articles, both of middle school students (5.3％) and high school students (8.3％) responded that they could do so in the video room. 3) relating to the harmful shops where they experienced unsound opposite sex acquaintance, both of middle school students (5.8％) and high school students (16.6％) responded that they did so most highly in hotels, and high school students had a remarkably high experience ratio of unsound opposite sex acquaintance, compared with middle school students (p〈0.05). 4) relating to the harmful shops where they experienced violence, middle school students responded that they did so in the electronic game room (14.0％) and then in the singing room (3.7％), and high school students responded that they did so in the electronic game room (9.3％), the nightclub (4.6％), Soju-room (4.1 ％), and high school students had a remarkably high experience ratio of violence, compared with middle school students (p〈0.05). 5) relating to the harmful places where they experienced drugs both of middle school students (0.8％) and high school students (2.4％) responded that they did so in the hotels. Fifthly, when going to the harmful shops, students had the experience of being guided and regulated roughly 1 time - 2 times, and middle school students (16.4％) and high school students (16.7％) had almost similar experience ratios of being guided and regulated. Conclusively, there was a limit in controlling the environment and purification zone only by legal regulations and institutional controls, the self-control purification effort for the school and the surrounding environment was required greatly, in order to protect students from harmful environment. In addition, the constant study to establish the educational environment purification measures must be carried out.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korea journal of population studies
• /
• v.11 no.2
• /
• pp.33-53
• /
• 1988

This study aimed at developing a desirable family planning policy and strategy by examining the current status of family planning practice in rural Korea and by indentifying the crucial factors which affect fertility control behavior. For this purpose, an analytical study was conducted, using the survey data collected in July 1985, on an interview basis, on 1, 440 married women living in the Soyi, Wonnam and Maingdong townships of Eumseong County(in North Chungcheong Province). This study population has the typical characteristics of rural areas, and the results of the analysis can be summarized as follows: 1. In regard to the demographic characteristics of the study population : their average age at marriage was 23.7, they had an average of 2.6 children( 1.3 boys, 1.3 girls) :10% experienced the death of their child (ren) :14% had spontaneous abortion(s) :4% weathered stillbirth(s) :35% went through induced abortion (s) : and 5.5% were currently pregnant. The average of their ideal numbers of children was 2.2, while 44% felt that they must have a son. 2. Looking at the contact rate with medical & health institutions, over the past 1 year, the visit rate to health subcenters was 43.7%, while 26.9% visited the (county) health center :59.6% had been to private clinics : and 41.5% went to the Soonchunhyang - Eumsung hospital : thus showing a relatively high rate of accessibility. 3. The utilization rate of family planning services was 76.5%, with tubectomy being the most prominent method at 52.3%, while the informants were health workers in 54.2% of the acceptors. Of the 8.4% who discontinued the use of contraceptive methods, only 26% did so due to want for pregnancy, natural infertility (meno - pause), or other reasons, while the remaining 74% stopped usage on account of side effects, failure in the methods themselves, and inconvenience of use, thus pointing to a situation where the proper choice of family planning methods have not yet been made. It can be noted that there is a strong motivation for early birth stopping as 35.3% practice family planning even with only one child, of which 38.3% have had sterilization operations. According to results of a multiple regression analysis, among the variables affecting contraception usage the most significant variable was the number of sons. 4. 34.8% experienced induced abortions. It was shown as a result of multiple regression analysis that the number of children and attitudes toward induced abortions extensively affected their frequency of abortions conducted. 5. In the regard to the relation between family planning and induced abortions, 33.7% of the women used both, while 52.0% of them used only the former(family planning), with only 1.4 % utilizing solely the latter(abortion), and 12.9% totally abstaining from fertility regulation : again, the discriminant analysis indicated that the choice of family planning and/or induced abortion was determined by the number of children and attitudes toward induced abortion. In view of the above mentioned results, the following are some comments and suggestions concerning problems related to the current family planning policies, in Korea : 1. It is difficult to expect a further quantitative expansion in family planning program operations, as there has been an excessive supply of target-oriented sterilization operations on women. From a maternal and child health care point of view, it will be desirable to have a diversification of service points in the future where family planning methods may be properly chosen, so that choices of methods which suit the mothers' characteristics and tastes may be made by the individuals themselves by strengthening their quality of family planning information services. 2. Along with the strengthening of the qualitative improvement of family planning services policies must be implemented to effectively promote the moral (ethical) deterrents to induced abortions and to preference for sons. From a maternal care standpoint, the social permissive norm toward induced abortion must be modified, and the bias towards son must be analyzed as the women with more daughters have a lower rate of family planning acceptance. Such changes in attitudes, however, can not be hoped to be accomplished with ad hoc policies, but will only be possible when an enhancement of the women's status(within the society) is brought about in a long - term perspective.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.197-211
• /
• 2021

In the service industry the types are diversifying and the scale of service companies is greatly improving. Such a phenomenon is caused by economic growth and technological development diversifying consumer needs creating demand for new services maturing the service industry and intensifying competition among companies in the form of global competition. It can be said that this is because it is necessary to improve competitiveness by utilizing the economy of scale. Research is needed on the impact of entrepreneurship on various outcome variables in order for service organization managers to respond quickly to diverse and rapidly changing environments and achieve organizational outcomes and corporate goals of management outcomes. The purpose of this study was to empirically analyze the relationship in which the entrepreneurial spirit of a manager influences the relationship between customer orientation, which is an organizational result, customer satisfaction, and financial result, which is a management result. In order to verify such research, the questionnaire was composed of one business owner questionnaire, two employee questionnaires, and two customer questionnaires. The questionnaire was distributed to a total of 400 companies, and the questionnaires of 340 companies were collected. Of these, 303 companies, excluding the questionnaires of 37 companies with many dishonest or missing values, were used for hypothesis testing. The results of this study can be summarized as follows. First, entrepreneurship had a positive (+) effect on customer orientation, supporting the hypothesis. Second, customer orientation showed a positive (+) effect on customer satisfaction, supporting the hypothesis. Third, customer satisfaction showed a positive (+) effect on financial outcomes, supporting the hypothesis. Fourth, it was found that entrepreneurship influences customer satisfaction through customer orientation, and customer satisfaction affects financial outcomes. It turns out that customer orientation between entrepreneurship and customer satisfaction is completely mediated, and customer satisfaction is completely mediated by customer orientation and financial outcomes. The relationship between entrepreneurship and management improved employee behavior and attitudes, which is an individual outcome, and this change was found to improve customer satisfaction, which is an organizational outcome. It makes frequent contact with customers in the process of servicing them. Employee roles are important at service contacts and influence service purchases. Employees facing customers through service contacts act as a decisive factor in maintaining a continuous relationship with customers. Within a beauty service company, it is necessary to create a customer-oriented environment among workers. It suggests that customer-oriented companies and employees can anticipate their desires and provide products or services of superior value to achieve greater customer satisfaction and a competitive advantage. In addition, it was clarified that customer satisfaction has an aspect relationship with financial management, which is a management result. Therefore, it is suggested that the entrepreneurial spirit is an important factor for the management of a beauty service company to secure competitiveness and improve results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.141-173
• /
• 2007

The study examines how the environmental factors of store influence service brand personality and repurchase intention in the service environment. The service industry has been experiencing the intensified competition with the industry's continuous growth and the influence from rapid technological advancement. Under the circumstances, it has become ever more important for the brand competitiveness to be distinctively recognized against competition. A brand needs to be distinguished and differentiated from competing companies because they are all engaged in the similar environment of the service industry. The differentiation of brand achievement has become increasingly important to highlight certain brand functions to include emotional, self-expressive, and symbolic functions since the importance of such functions has been further emphasized in promoting consumption activities. That is the recent role of brand personality that has been emphasized in the service industry. In other words, customers now freely and actively express their personalities or egos in consumption activities, taking an important role in construction of a brand asset. Hence, the study suggests that it is necessary to disperse the recognition and acknowledgement that the maintenance of the existing customers contributes more to boost repurchase intention when it is compared to the efforts to create new customers, particularly in the service industry. Meanwhile, the store itself can offer a unique environment that may influence the consumer's purchase decision. Consumers interact with store environments in the process of,virtually, all household purchase they make (Sarel 1981). Thus, store environments may encourage customers to purchase. The roles that store environments play are to provide informational cues to customers about the store and goods and communicate messages to stimulate consumers' emotions. The store environments differentiate the store from competing stores and build a unique service brand personality. However, the existing studies related to brand in the service industry mostly concentrated on the relationship between the quality of service and customer satisfaction, and they are mostly generalized while the connective studies focused on brand personality. Such approaches show limitations and are insufficient to investigate on the relationship between store environment and brand personality in the service industry. Accordingly, the study intends to identify the level of contribution to the establishment of brand personality made by the store's physical environments that influence on the specific brand characteristics depending on the type of service. The study also intends to identify what kind of relationships with brand personality exists with brand personality while being influenced by store environments. In addition, the study intends to make meaningful suggestions to better direct marketing efforts by identifying whether a brand personality makes a positive influence to induce an intention for repurchase. For this study, the service industry is classified into four categories based on to the characteristics of service: experimental-emotional service, emotional -credible service, credible-functional service, and functional-experimental service. The type of business with the most frequent customer contact is determined for each service type and the enterprise with the highest brand value in each service sector based on the report made by the Korea Management Association. They are designated as the representative of each category. The selected representatives are a fast-food store (experimental-emotional service), a cinema house (emotional-credible service), a bank (credible-functional service), and discount store (functional-experimental service). The survey was conducted for the four selected brands to represent each service category among consumers who are experienced users of the designated stores in Seoul Metropolitan City and Gyeonggi province via written questionnaires in order to verify the suggested assumptions in the study. In particular, the survey adopted 15 scales, which represent each characteristic factor, among the 42 unique characteristics developed by Jennifer Aaker(1997) to assess the brand personality of each service brand. SPSS for Windows Release 12.0 and LISREL were used in the analysis of data verification. The methodology of the structural equation model was used for the study and the pivotal findings are as follows. 1) The environmental factors ware classified as design factors, ambient factors, and social factors. Therefore, the validity of measurement scale of Baker et al. (1994) was proved. 2) The service brand personalities were subdivided as sincerity, excitement, competence, sophistication, and ruggedness, which makes the use of the brand personality scales by Jennifer Aaker(1997) appropriate in the service industry as well. 3) One-way ANOVA analysis on the scales of store environment and service brand personality showed that there exist statistically significant differences in each service category. For example, the social factors were highest in discount stores, while the ambient factors and design factors were highest in fast-food stores. The discount stores were highest in the sincerity and excitement, while the highest point for banks was in the competence and ruggedness, and the highest point for fast-food stores was in the sophistication, The consumers will make a different respond to the physical environment of stores and service brand personality that are inherent to the corresponding service interface. Hence, the customers will make a different decision-making when dealing with different service categories. In this aspect, the relationships of variables in the proposed hypothesis appear to work in a different way depending on the exposed service category. 4) The store environment factors influenced on service brand personalities differently by category of service. The factors of store's physical environment are transferred to a brand and were verified to strengthen service brand personalities. In particular, the level of influence on the service brand personality by physical environment differs depending on service category or dimension, which indicates that there is a need to apply a different style of management to a different service category or dimension. It signifies that there needs to be a brand strategy established in order to positively influence the relationship with consumers by utilizing an appropriate brand personality factor depending on different characteristics by service category or dimension. 5) The service brand personalities influenced on the repurchase intention. Especially, the largest influence was made in the sophistication dimension of service brand personality scale; the unique and characteristically appropriate arrangement of physical environment will make customers stay in the service environment for a long time and will lead to give a positive influence on the repurchase intention. 6) The store environment factors influenced on the repurchase intention. Particularly, the largest influence was made on the social factors of store environment. The most intriguing finding is that the service factor among all other environment factors gives the biggest influence to the repurchase intention in most of all service types except fast-food stores. Such result indicates that the customers pay attention to how much the employees try to provide a quality service when they make an evaluation on the service brand. At the same time, it also indicates that the personal factor is directly transmitted to the construction of brand personality. The employees' attitude and behavior are the determinants to establish a service brand personality in the process of enhancing service interface. Hence, there should be a reinforced search for a method to efficiently manage the service staff who has a direct contact with customers in order to make an affirmative improvement of the customers' brand evaluation at the service interface. The findings suggest several managerial implications. 1) Results from the empirical study indicated that store environment factors have a strong positive impact on a service brand personality. To increase customers' repurchase intention of a service brand, the management is required to effectively manage store environment factors and create a friendly brand personality based on the corresponding service environment. 2) Mangers and researchers must understand and recognize that the store environment elements are important marketing tools, and that brand personality influences on consumers' repurchase intention. Based on such result of the study, a service brand could be utilized as an efficient measure to achieve a differentiation by enforcing the elements that are most influential among all other store environments for each service category. Therefore, brand personality established involving various store environments will further reinforce the relationship with customers through the elevated brand identification of which utilization to induce repurchase decision can be used as an entry barrier. 3) The study identified the store environment as a component of service brand personality for the store's effective communication with consumers. For this, all communication channels should be maintained with consistency and an integrated marketing communication should be executed to efficiently approach to a larger number of customers. Mangers and researchers must find strategies for aligning decisions about store environment elements with the retailers' marketing and store personality objectives. All ambient, design, and social factors need to be orchestrated so that consumers can take an appropriate store personality. In this study, the induced results from the previous studies were extended to the service industry so as to identify the customers' decision making process that leads to repurchase intention and a result similar to those of the previous studies. The findings suggested several theoretical and managerial implications. However, the situation that only one service brand served as the subject of analysis for each service category, and the situation that correlations among store environment elements were not identified, as well as the problem of representation in selection of samples should be considered and supplemented in the future when further studies are conducted. In addition, various antecedents and consequences of brand personality must be looked at in the aspect of the service environment for further research.