Journal of the Institute of Electronics Engineers of Korea SD
/
v.48
no.5
/
pp.25-33
/
2011
This work proposes a skinny-type 10b 50MS/s 0.13um CMOS three-step pipeline ADC for CIS applications. Analog circuits for CIS applications commonly employ a high supply voltage to acquire a sufficiently acceptable dynamic range, while digital circuits use a low supply voltage to minimize power consumption. The proposed ADC converts analog signals in a wide-swing range to low voltage-based digital data using both of the two supply voltages. An op-amp sharing technique employed in residue amplifiers properly controls currents depending on the amplification mode of each pipeline stage, optimizes the performance of op-amps, and improves the power efficiency. In three FLASH ADCs, the number of input stages are reduced in half by the interpolation technique while each comparator consists of only a latch with low kick-back noise based on pull-down switches to separate the input nodes and output nodes. Reference circuits achieve a required settling time only with on-chip low-power drivers and digital correction logic has two kinds of level shifter depending on signal-voltage levels to be processed. The prototype ADC in a 0.13um CMOS to support 0.35um thick-gate-oxide transistors demonstrates the measured DNL and INL within 0.42LSB and 1.19LSB, respectively. The ADC shows a maximum SNDR of 55.4dB and a maximum SFDR of 68.7dB at 50MS/s, respectively. The ADC with an active die area of 0.53$mm^2$ consumes 15.6mW at 50MS/s with an analog voltage of 2.0V and two digital voltages of 2.8V ($=D_H$) and 1.2V ($=D_L$).
Cho, Jun Hyun;Song, You Chun;Lee, Kwang Sik;Choi, Sik Won;Lee, Mi Ja;Jang, Ki Chang;Kim, Hyun Young;Kang, Hyeon Jung;Park, Ki Do;Seo, Woo Duck
Korean Journal of Environmental Agriculture
/
v.36
no.3
/
pp.175-183
/
2017
BACKGROUND:The Aromatic rice which is characterized by the flavor of Nurungji when cooked rice, and consumption is increasing recently. The purpose of this study was to investigate the physicochemical characteristics and aroma components of five aromatic rice cultivars according to transplanting time. METHODS AND RESULTS: Quantitative analysis of protein, fat, fatty acid and essential amino acid for five aroma rice cultivars(Hyangmibyeo 2 ho, Aromi, Mihyang, Aranghyangchal, Heughyang)and transplanting time was analyzed by crude protein analyzer, gas chromatography (GC), liquid chromatography (LC) and viscosity analysis was done by using rapid viscosity analyzer (RVA). The content of 2-acetyl-1-pyrroline (2AP) was determined by gas chromatography mass spectrometer. (GC-MS) As a result, the average protein and lipid contents were 6.5% and 2.4%, respectively. The content of essential amino acid showed the highest content at 104.4mg/g. There was no significant change in normal nutrients during the transplanting time. By RVA, cv.Hyangmibyeo 2 ho showed the highest peak and total setback viscosities and lowest breakdown viscosity in early transplantation. The content of 2AP in flavor varieties and transplanting time was quantitatively analyzed by GC-MS. Among the cultivars, Aromi showed the highest 2AP contents at $66.7{\mu}g/100gin$ normal transplanting time. CONCLUSION: cv.Aromi and Hyangmibyeo 2 ho were excellent physicochemical properties and 2AP components contents amongaromatic rice cultivars tested. Theiroptimaltime to transplant was at the beginning of June in the area of Miryang.
Journal of Korean Society of Occupational and Environmental Hygiene
/
v.25
no.3
/
pp.366-379
/
2015
Objectives: The objective of this study is to assess airborne particulate matter(PM) pollution and its effect on health of residents living near Ansim Briquette Fuel Complex in Daegu metropolitan region. Methods: The California Puff(CALPUFF) dispersion model, version 5.8, which can estimate the dispersion direction and range of airborn $PM_{10}$ was used to determine the possible areas affected by $PM_{10}$ pollutants emitted from Ansim briquette fuel complex. The CALPUFF modeling with 200 m grid-cell resolution was performed based on $PM_{10}$ emissions estimated from the amount of coal consumption in the fuel complex for four months in 2012. The Weather Research and Forecasting(WRF) fields were processed using CALMET to produce CALPUFF-ready meteorological inputs. Also, the distance from Ansim Briquette Fuel Complex to the residence of each environmental pneumoconiosis patient was analyzed. In addition, the affecting region of the pollutants emitted from briquette factories in Ansim Briquette Fuel Complex was determined. Results: CALPUFF modeling results showed that the highest concentrations of $PM_{10}$ were found near around the fuel complex. The modeled $PM_{10}$ distributions were characterized by significant decreases in concentration with distance from the complex. Seasonally, the highest concentration of $45{\mu}g/m^3$ was calculated in October which was mostly due to the distinct variation of amount of emission. Additional modeling with the maximum $PM_{10}$ emission of about 88 tons per year in 1986 showed that the highest concentration in October was nearly increased by 8 times than the concentration modeled with emission of 2010. As a result of medical examination and interviews for the residents in Ansim Briquette Fuel Complex and its surroundings, 8 environmental pneumoconiosis patients were found. These patients do not have occupational exposure and history. These patients have lived 0.3~1.1 km area in Ansim Briquette Fuel Complex and its surroundings. Conclusions: Airborne particles emitted from Ansim Briquette Fuel Complex can contribute to significant increase in $PM_{10}$ concentration in residential areas near around the complex. Especially, the residents near fuel complex may exposed to the pollutants emitted from the factories in Ansim Briquette Fuel Complex.
The maize production in South-eastern Asian countries showed a continuous increase with increasing poultry-livestock from the beginning of the 1990s to early 2010. Also the need for a new variety development of each contries was increased rapidly in the same period. Single-Cross hybrid varieties have been developed and supplied from 2001 instead of multi-cross maize varieties since 1992 in Indonesia. In Cambodia, CP group is mainly manufacturing feeds with most of the forage maize from farmers who are growing its seeds from the company. Cambodian main cultivars are varieties of multinational corporations such as DK8868 from Monsanto, NK6326, NK7328 from Syngenta and CP333 from CP group including local business company. Vietnam is the main maze importing country in South-Eastern Asia which had imported 13 times scale of amount compared to exports in average from 1990 to 2011. Vietnamese government has developed a range of varieties for improving their efficiency in production, such as the LVN-10 with political investments. Their production has been reached to 80% of the total. According to the 2012 MIFAFF (Ministry for Food, Agriculture, Forestry and Fisheries) data in Korea, domestic edible maize cultivation area was approximately 15,000ha. It showed 74,399 tons of production, 3.8% of food self-sufficiency in maize and around 0.9% of grain self-sufficiency rate. The consumption of grain is mostly rely on imports in Korea. To overcome the limit of the domestic seed market and increase maize self-sufficiency, the need to develop maze varieties for world-class is increasing at present through analyzing the market trend and prospect of the seed industry in South-eastern Asia.
Park, Jong-Ku;Koh, Sang-Baek;Kim, Chun-Bae;Park, Kee-Ho;Wang, Seung-Jun;Chang, Sei-Jin;Sin, Soon-Ae;Kang, Myung-Guen
Journal of Preventive Medicine and Public Health
/
v.32
no.3
/
pp.383-394
/
1999
Objectives: This study was conducted to identify the factors influencing the mortality of Koreans over the age of 40 by a nested case-control study. Methods: The cohort consisted of the beneficiaries of Korea Medical Insurance Corporation for Government Employees & Private School Teachers and Staff(KMIC) who received health examinations of KMIC in 1992 and 1993 retrospectively. At that time, they were more than 40 years old. The cases were 19,258 cohort members who had died until December 31, 1997. The controls were 19,258 cohort members who were alive until December 31, 1997. Controls were matched with age and sex distribution of the cases. The data used in this study were the funeral expenses requesting files, and the files of health examinations and health questionnaires gathered in 1992 and 1993. To assess the putative risk factors of death, student t-test, chi-square test, multiple logistic regression analysis were used. Results : In multiple logistic regression analysis, independent risk factors of death were as follows; systolic blood pressure, diastolic blood pressure, blood glucose, AST, urine glucose, urine protein, alcohol drinking(frequency), cigarette smoking and perceived health status, intake of restoratives and blood transfusion showed positive associations with death; coffee consumption showed negative associations with death; and body mass index and serum total cholesterol showed J-shaped association with death. Conclusions: Regarding the direction of association, the result of analysis on the data restricted to '96-'97 was same as that of '93-'97. But in some variables such as obesity, serum cholesterol, the odds ratios of death in the data of '96-'97 were higer than those of '93-'94, which suggested that the data of '93-'94 was bearing effect-cause relationship. We concluded that it suggested further researches using long-term follow-up data to be needed in this area.
In order to estimate the post-ingestion bioavailability of heavy metals and to assess the risk of adverse health effects on human exposure to toxic heavy metals, environmental geochemical surveys were undertaken around the Dogok Au-Ag-Cu and the Hwacheon Au-Ag-Pb-Zn mine sites. Human risk assessment of toxic heavy metals was performed with the results of the SBET(simple bioavailability extraction test) analysis for soil and chemical analytical data for crop plant and water. Arsenic and other heavy metals were highly elevated in tailings from the Dogok(218 As mg/kg, 90.2 Cd mg/kg, 3,053 Cu mg/kg, 9,473 Pb mg/kg, 14,500 Zn mg/kg) and the Hwacheon(72 As mg/kg, 12.4 Cd mg/kg. 578 Pb mg/kg, 1,304 Zn mg/kg) mines. These significant concentrations can impact on soils and waters around the tailing dumps. The quantities of As, Cd and Zn extracted from paddy soils in the Hwacheon mine using the SBET analysis were 55.4%, 20.8% and 26.4% bioavailability, respectively, and for farmland soils in the Dogok mine, 40.8%, 37.6% and 33.0% bioavailability, respectively. From the results of human risk assessment, HI(Hazard Index) value exceeded 1.0 for As in the Hwacheon mine and for Cd in the Dogok mine. Thus, toxic risks for As and Cd exist via exposure(ingestion) of contaminated soil, water and rice grain in these mine sites. The cancer risk for As by the consumption of rice and groundwater in the Hwacheon mine area was 8E-4 and 1E-4, respectively. This risk level exceeds the acceptable risk(1 in 100,000) for regulatory purpose. Therefore, regular ingestion of locally grown rice and ground-water by the local population can pose a potential health threat due to long-term arsenic exposure.
Journal of the Korean Society of Food Science and Nutrition
/
v.43
no.4
/
pp.522-529
/
2014
Sea tangle (Laminaria japonica) is well known as having anti-diabetic and hypolipidemic effects in animals as well as in humans. In this study, we evaluated the effects of sea tangle-added patty on postprandial blood glucose and lipid profiles in borderline-hypercholesterolemic (cholesterol ${\geq}200$ mg/dL) adults. Eleven subjects voluntarily participated in the experiment, and each subject provided written consent. Experimental patty (E) was made by adding 2.25 g of sea tangle powder as a substitution to 1.125 g each of pork and chicken. In the first week, 200 g of Control patty (C) was provided to each subject, who had fasted more than 12 hours. In the second week, the same amount of E patty was supplied under the same conditions. Serum glucose levels increased significantly less at 30, 60, and 120 min after consumption of E patty compared to the levels at all time points after eating C patty. Thus, the change in the area under curve (${\Delta}AUC$) of serum glucose levels through 120 minutes was lower when consuming E patty compared to C patty. Although serum C-peptide concentrations were not significantly different at all time points between the two patties, the ${\Delta}AUC$ of serum C-peptide concentrations through 120 minutes was lower when consuming E patty compared to C patty. However, there were no differences in serum levels of triglyceride, total cholesterol, LDL-C, and HDL-C at 30, 60, 120, 180, and 240 min between the two patties. Further, each ${\Delta}AUC$ of these lipid levels through 240 minutes was not significantly different between the two patties. The results indicate that sea tangle-added patty may decrease postprandial plasma glucose concentrations and reduce insulin secretion, although it might not ameliorate serum lipid profiles in adults with borderline-hypercholesterolemia.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.8
no.1
/
pp.193-203
/
2013
The social welfare service is expanding to different field as the social welfare budget is increasing. By this opportunity, it needs to make clear of the basis of argument that the necessity of development of korean government's support and aid by social policy should be worked. Welfare economics perspective, this study used by the operating expenditure in welfare facilities for the elderly old people to effect social benefits to be gained, in other words, business value analysis. Local elderly people, provide opportunities to participate in the economic activities of the family welfare services offered to attainment of the elderly welfare policy, and provide disease prevention and health promotion opportunities, to enhance the satisfaction of life, including a wide range of impact will cause. In this study, elderly people use the welfare facilities for the elderly when they get the benefits by applying the AHP analysis techniques operating value was calculated. Elderly Welfare Center operated by the result of applying P senior welfare center Case of the metropolitan area value was estimated 248.4 billion won. Contribute to the effects caused by the cost factor of the analysis was 23.1% of the total 57.3 billion won. Independence elements 57.6 billion (23.2%), the analysis of the therapeutic elements 133.4 billion (53.7%) of the net was. The result of the study anticipates the role of basic research material for the necessity of intervention, support, and aid by the Welfare facilities for the elderly field at this point in time where the welfare budget policy in terms of universal social service is reinforced, rather than the trend, until recently, of realizing the Elderly welfare budget and service as Consumption expenditure and consumable benefits and the function of performing the effect and evaluation in tentative action of social conflict.
Jung, Jae Gyeong;Lee, Yeong Hun;Choi, Jae Eun;Song, Gi Eun;Ko, Jong Han;Lee, Kyung Do;Shim, Sang In
KOREAN JOURNAL OF CROP SCIENCE
/
v.65
no.4
/
pp.377-385
/
2020
Recently, wheat consumption has been increasing in Korea, requiring increased production. Nitrogen fertilization is a critical determinant in crop yield; therefore, it is necessary to optimize the nitrogen fertilization regime with current trends that emphasize the minimum impact of nitrogen fertilizer on the environment. In this study, both nondestructive spectral analysis using a hyperspectral camera and growth analysis were performed to determine the optimal N top-dressing rates after heading. The nitrogen application regimes consisted of three conditions according to the secondary top-dressing rate: N4:3:0 (0 kg 10 a-1), N4:3:3 (2.73 kg 10 a-1), and N4:3:6 (5.46 kg 10 a-1). Subsequently, growth and physiological investigations were performed at the jointing, heading, and ripening stages of wheat, and spectral investigations were conducted. On April 29, as the nitrogen fertilization rate was increased to N4:3:3 and N4:3:6, plant height and grain yield increased by 4% and 8%, and 8% and 52%, respectively, compared to those under N4:3:0. Leaf area index and SPAD value also increased by 13% and 24%, and 32% and 43%, respectively. The R (red), G (green), and B (blue) of leaf color were lowered by 15, 11, and 4 in N4:3:3 and 44, 34, and 18 in N4:3:6, respectively, as compared to the control. Grain yield was the highest at high top-dressing (N4:3:6), however, there was no difference between no top-dressing (N4:3:0) and intermediat top-dressing (N4:3:3). The reflectance analyzed using a hyperspectral camera showed a difference in the near-infrared (NIR) region on March 19, and on April 29, there was a difference both in the visible light region greater than 550 nm and the NIR region. Vegetation indices differed according to fertilization regime, except for the greenness index (GI). The results of this study showed that not only growth and physiological analysis but also spectral indices can be used to optimize the nitrogen top-dressing rate.
This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.