• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.77-79
• /
• 2016

In this paper, we consider hierarchical modulation (HM), which has been widely exploited in digital broadcasting systems. In HM, each independent data stream is mapped to the modulation symbol with different transmission power and normalization factors of conventional M-QAM cannot be used. In this paper, we derive the method and formula for exact normalization factor of three-level hierarchical 64QAM.

• Wind and Structures
• /
• v.37 no.2
• /
• pp.117-131
• /
• 2023

Korea Design Standard (KDS) will be updated with two major revisions on the assessment of wind load and performance-based wind design (PBWD). Major changes on the wind load assessment are the wind load factor and basic wind speed. Wind load factor in KDS is reduced from 1.3 to 1, and mean recurrence interval (MRI) for basic wind speed increases from 100 years to 500 years considering the reduction of wind load factor. Additional modification is made including pressure coefficient, torsional moment coefficient and spectrum, and aeroelastic instability. Combined effect of the updates of KDS code on the assessment of wind load is discussed with the case study on the specified sites and building. PBWD is newly added in KDS code to consider the cases with various target performance, vortex-induced vibration, aeroelastic instability, or inelastic behavior. Proposed methods and target performance for PBWD in KDS code are introduced.

• Steel and Composite Structures
• /
• v.33 no.6
• /
• pp.891-906
• /
• 2019

This study considers the instability behavior of sandwich plates considering magnetorheological (MR) fluid core and piezoelectric reinforced facesheets. As facesheets at the top and bottom of structure have piezoelectric properties they are subjected to 3D electric field therefore they can be used as actuator and sensor, respectively and in order to control the vibration responses and loss factor of the structure a proportional-derivative (PD) controller is applied. Furthermore, Halpin-Tsai model is used to determine the material properties of facesheets which are reinforced by graphene platelets (GPLs). Moreover, because the core has magnetic property, it is exposed to magnetic field. In addition, Kelvin-Voigt theory is applied to calculate the structural damping of the piezoelectric layers. In order to consider environmental forces applied to structure, the visco-Pasternak model is assumed. In order to consider the mechanical behavior of structure, sinusoidal shear deformation theory (SSDT) is assumed and Hamilton's principle according to piezoelasticity theory is employed to calculate motion equations and these equations are solved based on differential cubature method (DCM) to obtain the vibration and modal loss factor of the structure subsequently. The effect of different factors such as GPLs distribution, dimensions of structure, electro-magnetic field, damping of structure, viscoelastic environment and boundary conditions of the structure on the vibration and loss factor of the system are considered. In order to indicate the accuracy of the obtained results, the results are validated with other published work. It is concluded from results that exposing magnetic field to the MR fluid core has positive effect on the behavior of the system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.127-134
• /
• 2008

The response of a bridge can be influenced by span length, bridge's surface condition, vehicle's weight, and vehicle's velocity. It is difficult to predict accurate behavior of a bridge. In the current standard of specifications, such dynamic effect is defined by impact factor and prescribed to consider live load as to increase design load by means of multiplying this value by live load. However, it is not well understood because the Impact factor method differs from every country. Dynamic, static and pseudo-staitic field loading tests on PSC-I girder bridges were carried out to find out the dynamic property of the bridge. This paper is aimed to figure out actual dynamic property of the bridge by using field loading test. An empirical method based on impact factor is widely used and also argued. Displacement and strain response measured from the tests was compared with one from the empirical method. The former seems to be reasonable since it can consider actual response of a bridge through field tests.

• Kyungpook Mathematical Journal
• /
• v.46 no.3
• /
• pp.425-431
• /
• 2006

In this paper, by introducing three parameters A, B and ${\lambda}$, and estimating the weight coefficient, we give a new extension of Hardy-Hilbert's inequality with a best constant factor, involving the Beta function. As applications, we consider its equivalent inequality.

• Kyungpook Mathematical Journal
• /
• v.47 no.3
• /
• pp.411-423
• /
• 2007

This paper deals with a reverse Hardy-Hilbert's inequality with a best constant factor by introducing two parameters ${\lambda}$ and ${\alpha}$. We also consider the equivalent form and the analogue integral inequalities. Some particular results are given.

• Kyungpook Mathematical Journal
• /
• v.49 no.2
• /
• pp.393-401
• /
• 2009

By introducing a parameter and estimating the weight coefficient, we obtain a new Hilbert-type integral inequality with a composite kernel and a best constant factor. As applications, we also consider its equivalent forms and reverse forms.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.277-284
• /
• 2006

In order to ensure the structural integrity of nuclear welded structures during design life, the fatigue life has to be evaluated by fatigue analysis procedures presented in technical codes such as ASME B&PV Code Section III. However, existing fatigue analysis procedures do not explicitly consider the presence of welded joints. A new fatigue analysis procedure based on a structural stress/fracture mechanics approach has been recently developed in order to reduce conservatism by erasing uncertainty in the analysis procedure. A recent review of fatigue crack growth data under various mean loading conditions using the structural stress/fracture mechanics approach, does not consider the mean loading effect, revealed some significant discrepancies in fatigue crack growth curves according to the mean loading conditions. In this paper, we propose the use of the stress intensity factor range ${\Delta}K$ characterized with loading ratio R effects in terms of the structural stress. We demonstrate the effectiveness in characterizing fatigue crack growth and S-N behavior using the well-known data. It was identified that the S-N data under high mean loading could be consolidated in a master S-N curve for welded joints.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.135-154
• /
• 2009

As the knowledge is recognized as a core factor of organization's competitiveness and creation of value added, the importance of knowledge management is also increased. To achieve the successful knowledge management, it is important to establish strategy that consider essential purpose of knowledge management such as creating and sharing of knowledge resource, improving performance, and continuing organizational innovation within the organization and influence factor inside and outside of organization. Until now, however, the research for knowledge management strategy was mostly limited to the statistical analysis based on the unilinear causality model, and systematic access and analysis that consider interaction and feedback structure between factors. In this paper, we developed the novel decision-making framework for successful strategy establishment by applying the analytic network process(ANP). Specifically. we derive clusters and components to decide the interaction and feedback structure between the elements of knowledge management by literature studies. And we produced relative importance and preference of clusters, components and alternatives dealing with feedback structure through the survey of experts in the field or related one of knowledge management. In result of this study, we expect that it will help the knowledge officer to decide establishing knowledge management strategy.