• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.75-81
• /
• 2017

PURPOSES : So far, aged cement concrete pavement on express highways has been rehabilitated mainly with asphalt concrete inlay. However, potholes were the major problem, and they shortened the life of the inlay mainly owing to the poor drainage of water once it infiltrated the interface of the concrete and asphalt. The purpose of this study is to compare the performance and economic efficiency of asphalt overlay and inlay. METHODS : Overlay and inlay were compared through accelerated pavement testing, and a life-cycle cost analysis was conducted in this study using the CA4PRS program. RESULTS and CONCLUSIONS : It was found from accelerated pavement testing that the overlay exhibited reflective crack resistance that was more than twice as effective as that of inlay. The total cost (construction cost + user cost) within the analysis period (20 years) of the overlay was 37% lower than that of the inlay.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.111-114
• /
• 2001

This study is a fundamental research for recycling waste vinyl in asphalt concrete mixture for roadway pavement. The mixing method and proper content of waste polyethylene(PE) film were determined through preliminary mix design. This study used 2-type aggregate gradations and two-type waste PE films. The mixtures were applied for a test pavement on a rural road. Quality evaluation of the asphalt concrete confirmed that waste vinyl asphalt concrete was applicable to road pavement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.79-80
• /
• 2022

A method for repairing cracks using low-viscosity resins has been proposed as a construction method that can quickly repair roads from deterioration. However, when the viscosity of the epoxy resin is high, there is a limit in that it is difficult for the material to penetrate into microcracks and cracks in the concrete top plate. In this study, an epoxy thin-layer pavement repair method was developed using low-viscosity PMMA (Poly methyl methacrylate) to repair microcracks on the pavement surface and pavement layer and reinforce the pavement surface. Materials necessary for the thin-layer packaging method were developed, and performance was evaluated to meet the epoxy binder quality standards. As a result, all materials met the required performance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.607-612
• /
• 2002

In road pavements, it is known that cement concrete pavement has superior durability, safety compared. But in repairing pavement, cement concrete pavement is not usually applied because of the length of time while the road is interrupted when using Ordinary and Rapid-hardening Portland Cement. And Super High Early Strength Cement and Ultra Super High Early Strength Cement are not favorable for ready mixed concrete because of rapid setting time, high slump loss and other restrictions. We developed special cement developing 1 day strength of over 30.0N/mm$^2$ to open the road within 1 day and workable time is maintained over 1 hour so that it can be used as ready mixed concrete. We performed experimental overlay construction with the cement and evaluated the mechanical property and the durability. At curing temperature of 8-l8$^{\circ}C$,the flexural strength was 6.4N/mm$^2$at 1 day, so that the road can be open to traffic within 1 day. In durability test, the hardened concrete showed higher durability than Portland cement concrete.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.611-616
• /
• 2013

Nowadays concrete pavement is increasing, since it is more durable than asphalt pavement. And the concrete pavement with lateral rain groove may induce high level of concrete whine noise as pure tone. In this paper, the design factor for good concrete whine noise is considered in view of tire pattern and structure design. In respect of tire pattern design, the tire having a cap tread with high center part stiffness and low shoulder part stiffness shows best concrete whine noise performance. And in respect of tire structural design, the tire with a thick center part of cap tread and low tread part stiffness show best concrete whine noise performance.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.35-43
• /
• 2004

미끄럼저항은 자동차의 타이 어 와 포장노면 사이에서 발생하는 미끄러짐을 방지하여 제동거리를 제어하고 주행 안전성을 확보하는데 중요한 역할을 한다. 우천시의 미끄럼저항 감소는 치명적인 교통사고를 유발할 수 있다. 노면위에 남은 토사 및 겨울철 제설재는 미끄럼저항을 감소시킬 수 있는 요소가 될 수 있다. 본 연구에서는 노면상의 잔류하는 이물질이 타이어와 포장노면사이에서 발생하는 미끄럼저항에 미치는 영향을 다양한 콘크리트 노면조직 형태 (횡방향타이닝, 종방향타이닝, 골재노출) 및 노면조직의 마모조건(신설노면, 마모된 노면)에 대하여 검토하였다. 노면상의 이물질로는 모래, 염화칼슘과 자동차에서 발생하는 폐 오일을 사용하였으며 각 경우별로 이물질의 양을 달리하여, 모래의 경우는 입도 및 양을 달리해가며 미끄럼저항에 미치는 영향을 검토하였다.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.268-276
• /
• 2008

In highway construction projects, concrete pavement productivity has been challenged with constructors and decision-makers; at present there are few methods available to accurately evaluate the factors impacting on it. Any inefficient method to analyze it leads to the excessive schedule, higher rehabilitation costs, shorter service life, and reduction of ride quality. To implement these negative outcomes, constructors or decision-makers need a systematic tool that can be used to categorize the factors related to construction productivity. This paper applies multiple regression technique for productivity analysis of the Jointed Plane Concrete Pavement (JPCP), identifies the significant factors, and provides a predictive model assisting in monitoring and managing the productivity of the JPCP construction process. The completed and progressive projects are employed to derive and assess the proposed model. The results are analyzed to illustrate its capabilities.

• 한국도로학회논문집
• /
• 제2권3호
• /
• pp.145-153
• /
• 2000

포장의 합리적 유지관리를 위해서는 기본적으로 포장의 상태를 객관적으로 평가하고, 평가한 자료를 이용하여 경제성 분석을 실시함으로써 최적의 보수공법 및 보수우선순위를 결정해야 한다. 전체적인 포장 상태를 객관적으로 평가하기 위해서는 포장상태 평가지수와 같은 단일화된 평가 기준이 필요하다. 본 연구에서는 우리나라 고속도로 콘크리트 포장에 적합한 포장상태 평가지수를 개발하기 위하여 현장 상세조사 및 포장평가위원회의 평가를 실시하고, 그 결과의 회귀분석을 통해 포장평가지수를 개발하였다. 또한 개발된 포장평가지수를 이용하여 포장유지관리에서 이용되기 위한 보수공법그룹을 제시하였다. 개발된 포장평가지수의 상관계수는 0.68이었으며, 콘크리트 포장평가지수에 사용된 독립변수들은 종단평탄성, 균열, 패칭 등이었다.

• Computers and Concrete
• /
• 제24권4호
• /
• pp.283-293
• /
• 2019

The limited availability of raw materials and increasing service demands for pavements pose a unique challenge in terms of pavement design and concrete material selection. The self-compacting rubberized concrete (SCRC) can be used in pavement design. The SCRC pavement slab has advantages of excellent toughness, anti-fatigue and convenient construction. On the premise of satisfying the strength, the SCRC can increase the ductility of pavement slab. The aim of this investigation is proposing a new method to predict the crack growth and flexural capacity of large-scale SCRC slabs. The mechanical properties of SCRC are obtained from experiments on small-scale SCRC specimens. With the increasing of the specimen depth, the bearing capacity of SCRC beams decreases at the same initial crack-depth ratio. By constructing extended finite element method (XFEM) models, crack growth and flexural capacity of large-scale SCRC slabs with different fracture types and force conditions can be predicted. Considering the diversity of fracture types and force conditions of the concrete pavement slab, the corresponding test was used to verify the reliability of the prediction model. The crack growth and flexural capacity of SCRC slabs can be obtained from XFEM models. It is convenient to conduct the experiment and can save cost.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.31-38
• /
• 2009

본 연구의 목적은 콘크리트 포장의 한 종류인 줄눈콘크리트 포장의 열화정도를 평가하는 것이다. 첫째로, 열화종류를 관찰하기 위하여 콘크리트 포장 육안조사를 실시하였다. 육안조사 결과 콘크리트 포장 파손의 형태는 대부분 줄눈 부위에서 조사되었고, 내구성 균열과 줄눈 파손이 주를 이루는 것으로 나타났다. 둘째로, 육안조사 결과에 기초하여 콘크리트 포장을 양호한 단면(4개소)과 불량한 단면(4개소)으로 구분하여 총 8개소에서 콘크리트 코어시편을 채취하였고, 콘크리트 열화 원인을 콘크리트 코어시편의 초음파 강도추정, 쪼갬인장강도 실험 및 화상분석 실험을 이용하여 분석하였다. 화상분석 실험결과, 총 21개의 시험편에서 Kansas DOT 기준(간격계수 $250\;{\mu}m$이하)을 만족하는 시험편은 단지 2개에 불과했고, 나머지 19개의 시험편의 간격계수는 $250\;{\mu}m$ 이상으로 평가되어 내구성 지수가 매우 낮은 것으로 나타났다. 따라서 조사된 콘크리트 포장의 주 열화 원인은 동결융해작용인 것으로 분석되었다.