• Composites Research
• /
• v.29 no.5
• /
• pp.293-298
• /
• 2016

In this paper, Glass Fiber Reinforced Thermoplastic (GFRTP) for automotive headlight source module was fabricated by compounding and injection molding using PPS (Poly Phenylene Sulfide) resin with glass fiber which has three cross section (round type, cocoon type, flat type). Tensile, flexural, impact properties were investigated on effect of cross section, glass fiber contents. And it was observed flatness, dimensional stability, fluidity depending on glass fiber cross section. As a result, flat glass fiber reinforced thermoplastic's mechanical properties were most excellent. Also, dimensional stability and flatness showed better results when using flat glass fiber.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.194-200
• /
• 2009

The extruder type is classified as screw type and non-screw type in terms of the extrusion method. The screw type extruder, which is the most frequently used, is classified as the single screw extruder and the multi-screw extruder. They are classified as vertical type and horizontal type in terms of structure; and those for compounding and for forming in terms of function. The single screw extruder is a universal extruder, most of which is suitable for the extrusion forming of thermoplastic resin. The multi-screw(two-screw, three-screw and four-screw) extruder can increase the extrusion power using the engagement of the screw flank. The single screw extruder does not have a good mixing ratio of the raw material and stable extrusion power, while it has low construction cost and operation cost. In this study, the single screw extruder, which has many weak points compared with the multi-screw extruder, was studied. There have been many studies on the single screw extruder, and they led to its significant development. The existing study method, however, had complex analysis processes and required much time. In this study, the CFD was applied to the performance test and analysis of the extruder, and the optimal design condition of the extrusion power for the screw and die of the single screw extruder was found by comparing the analysis results with the actual performance measurement of the single screw extruder.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1329-1340
• /
• 2004

The purpose of this study is to survey about the images of the sexy clothes that young women sympathize in modern society, that is, to make a research into the cognitive dimensions of 'Sexy image' and the constructive peculiarity of clothing. The researches into dimension of image by sexy clothing make that female mainly consist of in their twenties during May to October in 2003. The independent variables were: 1) The physical beauty dimension, 2) The negative estimate dimension, 3) The characteristic devaluation dimension,4) The elegance/ high grade dimension,5) The freshness/ beauty dimension,6) The sex appeal/ exposure dimension. Judging from each characteristic of costume in classified by articles, that is, colors, texture, shapes, details, and others-phenomenon of outerization of under clothing, print. We can know the clothes showing up our nice figures are the sleeveless design tied with strap, soft texture as silk chiffon and the colors that are not strong. And there were no embarrassed, ugly and pitiful clothing. Expressing sexy beauty by clothing is the result that the wearer produces intentionally by compounding design factors, it's the ideal when the observer's reaction and the wearer's intention correspond. Therefore, it will be helpful in expressing ideally if the subject, what kinds of sexy beauty the compounding design factors express, is studied carefully. Also it is expected to be used in grasping modem consumers' desires that want to look sexy, finding out how to express, dealing with the consumers' desires correctly, and the reference materials of the planning goods, sales promotion, and selecting of a medium of advertisement according to the consumers' desires.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.503-511
• /
• 2001

Present silica dispersing agents are based mainly on fatty acid derivatives of Zn, K and mixture of fatty acid and metallic soaps are used to increase activity. The viscosity of silica filled rubber is lowered by Zn-K soap type silica dispersing agent, thus fluidity of hydrocarbon chains and processibility is improved. Silica dispersing agent should not exert an influence on chracteristics of vulcanization. But scorch and curing time is shortened by Zn-K soap type silica dispersing agent. A newly developed silica dispersing agent, which is a nonmetal type agent, reduced the viscosity and hardness of silica compounding rubber, and the highly increased degree of dispersion of silica is caused by interaction of silica and rubber. Also it did not affect the curing characteristics and scorch stability of silica compounding rubber.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2000

Using FT-IR and contact angle measurements it is observed that the chemical surface treatments on virgin carbon blacks lead to a change of the surface properties, including surface functionality and surface free energy It is found that the developments of surface functional groups on acidically and basically treated (ACB and BCB in this study, respectively) carbon blacks are largely correlated with the specific component of surface free energy of the carbon blacks. However, a significant advantage of compounding composites is gained by BCB or NCB (nonpolar chemical treatment) specimens, resulting in improving the hardness, elongation at break, and tensile strength. Particularly, it is seen that the tensile strength of the composites are greatly depended on the London dispersive component of surface free energy determined from the contact angle measurements. It is then concluded that the London dispersion component of carbon blacks plays an important role in an organic rubbers-based compounding composite system.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.569-575
• /
• 2003

The flame retardancy was investigated when the halogenated flame retardant, decabromodiphenyl oxide (DBDPO) and chlorinated paraffin wax (CPW), was added to the polypropylene (PP) / montmorillonite (MMT) nanocomposites. The flame retardancy of polymer resin could be improved not only by addition of flame retardant but also with nanoparticles compositions. The effect of the contents of flame retardant and nanoparticles on the flame retardancy of polypropylene/ montmorillonite nanocomposite systems was thoroughly examined in terms of limited oxygen index (LOI) and cone calorimetry. As a results of cone calorimetry, the heat release rate (HRR) was reduced by the flame retardant DBDPO and CPW, and CPW was a little better than DBDPO. The LOI increased from flammable region (LOI<19) to nonflammable region (LOI>20) for all the flame retardants used in this study. Especially, the improvement in flame retardancy by compounding with PP and MMT was better than that by adding flame retardant to polypropylene. So, the addition of flame retardant after compounding with montmorillonite was more efficient than simple addition of flame retardant.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.812-820
• /
• 2002

The positive temperature coefficient (PTC) characteristics of polymer composites were investigated with the nano-sized carbon black particles using solution tasting and melt compounding methods. The polymeric PTC composites should the electrical threshold at 35 wt% for the melt compounding method and 40 wt% for the solution casting method. The ethylene vinylacetate copolymer (EVA) composite showed a gradual increase of resistance as a function of temperature and showed a maximum at the polymer molting point. The resistance of the high-density polythylene (HDPE) composite remains unchanged with temperature but started to Increase sharply near the melting point of HDPE and showed a maximum resistance at the melting point of HDPE. The dispersion of nano-sized carbon black particles was investigated by scanning electron microscopy (SEM) and low resistance after electrical threshold, and both methods exhibited a well dispersed morphology. When the electric current was applied to the PTC composites, the resistance started increasing at the curie temperature and further increased until the trip temperature was roached. Then the resistance remained stable over the trip temperature. The secondary increase started at T$\sub$m/ of matrix polymer and kept increasing up to the trip temperature.

• Quality Improvement in Health Care
• /
• v.14 no.2
• /
• pp.125-132
• /
• 2008

Background : The number of outpatient injected anticancer drug is increasing. and the pathway of prescribing, compounding, and injecting anticancer drug is processed very rapidly in out-patient department. Moreover, Dose of anticancer drug is often changed depending on side effect of patients. So we need more effective inspection of anticancer drug prescriptions. The purpose of this study was to analyze the prescription errors for anticancer drugs in Out-Patient Department and to suggest system to prevent them. Method : The study took place at Asan Medical Center from July to September 2007. The pharmacists performed inspection of anticancer drug prescriptions before compounding and injecting. We used protocol-based anticancer drug order program and Electronic Medical Record (EMR). Result : During the study period, we analyzed 4683 prescriptions for out-patient. And we detected 55 medication errors (1.2%). Most common errors included dosage above or below the correct ones (56.3%), followed by incorrect treatment duration. Because most of dosing errors were in the range of usual dosage, it was hard to detect them. So when inspecting the prescription, we considered the medical records of individual patients. As a result, we could raise the efficiency of intervention. Therefore inspection using EMR could possibly reduce the number of anticancer drug errors. Conclusion : we are preventing the medication errors on stability and dosage above or below the maximum therapeutic dose according to the previous inspection system. However most of dosing errors were in the range of usual dosage according to the result of this study. Because of there was interpatient variability of dosage depending adverse effect. For improvement of quality assurance, we suggest inspection system based on patient's medical history.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.449-456
• /
• 2019

Recent developments in architectural technologies and programs have enabled architects to think creatively and design free-form architecture. however, there are many problems in the production technology of FCP(Free-Form Concrete Panel). In particular, reduced accuracy due to lack of free-form panel production technology can lead to redesign of buildings as a result, problems such as an increase in construction cost and period. Therefore, this experiment aimed to compensate the decrease of the accuracy according to the displacement difference and to derive the proper mixing ratio for maintaining the shape during the free-form panel curing. In this study, molds were made using paraffin that is a recyclable phase change material. Concrete Panel is usually produced from Portland cement, dead burn magnesia, phosphate, borax and fine aggregate. In this study, four mixing ratios of FCP were selected after each material was blended to determine the proper blending ratio of the fluidity phase, the water absorption rate and the water content of the test piece. FCP was fabricated on the basis of the selected four compounding ratios and thickness and error rate were measured. Based on the error rate of the measured FCP, the quality standard was satisfied among the four compounding ratios.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.109-113
• /
• 2011

${\alpha},{\omega}$-Hydroxypropylpoly(dimethylsiloxane) was prepared from the reaction of a ${\alpha},{\omega}$-hydrogen polydimethylsiloxane with an allyl alcohol. MPE-g-poly(dimethylsiloxane) copolymer (MPES) was prepared from the graft copolymerization of MPE with ${\alpha},{\omega}$-hydroxypropyl group terminated PDMS. MPES/HDPE/EtO-CNT need to varify was prepared from the compounding of MPES, HDPE, and surface treated MWCNT with 4-ethoxybenzoic acid at $180^{\circ}C$. Melting point of the MPES/HDPE/EtO-CNT composite was decreased from 130 to $129^{\circ}C$ as increasing the content of MWCNT 10 to 20 wt% in the composite PTC characteristic of the MPES/HDPE/EtO-CNT composite was appeared at $120^{\circ}C$ as abruptly increasing the electrical resistivity at this temperature. The heighest PTC intensity of MPES/HDPE/EtO-CNT compsite at 10 wt% loading of EtO-CNT was 1.9.