Browse > Article
http://dx.doi.org/10.7234/composres.2016.29.5.293

A Study on Properties of the Glass Fiber Reinforced PPS Composites for Automotive Headlight Source Module  

Heo, Kwang-Yeol (Korea Dyeing & Finishing Technology Institute)
Park, Sung-Min (Korea Dyeing & Finishing Technology Institute)
Lee, Eun-Soo (Korea Dyeing & Finishing Technology Institute)
Kim, Myung-Soon (Korea Dyeing & Finishing Technology Institute)
Sim, Ji-Hyun (Korea Dyeing & Finishing Technology Institute)
Bae, Jin-Seok (Department of Textile System Engineering, Kyungpook National University)
Publication Information
Composites Research / v.29, no.5, 2016 , pp. 293-298 More about this Journal
Abstract
In this paper, Glass Fiber Reinforced Thermoplastic (GFRTP) for automotive headlight source module was fabricated by compounding and injection molding using PPS (Poly Phenylene Sulfide) resin with glass fiber which has three cross section (round type, cocoon type, flat type). Tensile, flexural, impact properties were investigated on effect of cross section, glass fiber contents. And it was observed flatness, dimensional stability, fluidity depending on glass fiber cross section. As a result, flat glass fiber reinforced thermoplastic's mechanical properties were most excellent. Also, dimensional stability and flatness showed better results when using flat glass fiber.
Keywords
PPS(Polyphenylene sulfide); Flat glass fiber; GFRTP(Glass fiber reinforced thermoplastics); Compounding; Injection molding;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 (International Journal) Kim, Y.J., and Lim, J.K., "A Study on Fatigue Properties of GFRP in Synthetic Sea Water", Journal of The Korean Society of Mechanical Engineers, Vol. 17, No. 6, 1993, pp. 1351-1360.
2 (International Journal) Jang, J., and Kim, H.S., "Performance Improvement of Glass Fiber-poly(phenylene sulfide) Composite" Journal of Applied Polymer, Vol. 60, No. 12, 1996, pp. 2297-2306.   DOI
3 (International Journal) Yamamoto, Y., and Hashimoto, M., "Friction and Wear of Water Lubricated PEEK and PPS Sliding Contacts : Part 2. Composites with Carbon or Glass Fibre", Journal of Wear, Vol. 257, No. 1-2, 2004, pp. 181-189.   DOI
4 (International Journal) Jang, B.P., and Kowbel, W., "Impact Behavior and Impact-fatigue Testing of Polymer Composites", Journal of Composites Science and Technology, Vol. 44, No. 2, 1992, pp. 107-118.   DOI
5 (International Journal) Tanaka, K., and Katayama, T., "Injection Molding of Flat Glass Fiber Reinforced Thermoplastics", Journal of Modern Physics B, Vol. 24, No. 15, 2010, pp. 2555-2560.   DOI
6 (International Journal) Nomura, M., and Kanno, S., "Influence of Shape of Cross Section on Properties of GF Reinforced Thermo-Plastics", Journal of Japan Society for composite Materials,, Vol. 36, No. 6, 2010, pp. 230-236.   DOI
7 (International Journal) Coussot, P., and Tocquer, L., "Macroscopic vs. Local Rheology of Yield Stress Fluids", Journal of Non-Newtonian Fluid Mechanics, Vol. 158, No. 1 2009, pp. 85-90.   DOI
8 (Book) Mallick, P.K., Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition, CRC Press, United States, 2007.
9 (International Journal) Lou, A.Y., and Murtha, T.P., "Environmental Effects on Glass Fiber Reinforced PPS Stampable Composites", Journal of Composite Materials, Vol. 21, No. 10, 1987, pp. 910-924.   DOI
10 (International Journal) Lhymn, C., and Wapner, P., "Slurry Erosion of Polyphenylene Sulfide-glass Fiber Composites", Journal of Wear, Vol. 119, No. 1, 1987, pp. 1-11.   DOI
11 (International Journal) Lee, H.-K., and Song, S.-Y., "Effect of Volume Fraction of Fibers on the Mechanical Properties of a Lightweight Aggregate Concrete Reinforced with Polypropylene Fibers," Journal of the Korea Concrete Institute, Vol. 18, No. 6, 2006, pp. 743-748.   DOI