• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.87-92
• /
• 2000

In this paper, we investigated the braking performance of a composite brake shoe for power car. Laboratory bench test and field tests were carried out to characterize the braking performance by the parameters such as friction coefficient, wear rate, braking temperature and stopping distance. Density distribution was found to have a significant influence on the wear rate. The composite brake shoe with even density distribution showed better braking performance. The braking performance of a composite brake shoe was also compared with that of a cast iron brake shoe which is currently being used. The result indicated the performance of the composite brake shoe is better than the cast iron brake shoe.

• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1173-1182
• /
• 2016

The objective of this work was to evaluate the ductile cracked structures with bonded composite patch used in probabilistic elastic plastic fracture mechanics subjected to tensile load. The finite element method is used to analyze the stress intensity factors for elastic case, the effect of cracks and the thickness of the patch ($e_r$) are presented for calculating the stress intensity factors. For elastic-plastic the Monte Carlo method is used to predict the distribution function of the mechanical response. According to the obtained results, we note that the stress variations are important factors influencing on the distribution function of (J/Je).

• Advances in nano research
• /
• 제12권4호
• /
• pp.353-363
• /
• 2022

This paper presents an investigation about superharmonic and subharmonic resonances of a carbon nanotube reinforced composite beam subjected to lateral harmonic load with damping effect based on the modified couple stress theory. As reinforcing phase, three different types of single walled carbon nanotubes (CNTs) distribution are considered through the thickness in polymeric matrix. The governing nonlinear dynamic equation is derived based on the von Kármán nonlinearity with using of Hamilton's principle. The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then is solved by using of multiple time scale method. Effects of different patterns of reinforcement, volume fraction, excitation force and the length scale parameter on the frequency-response curves of the carbon nanotube reinforced composite beam are investigated. The results show that volume fraction and the distribution of CNTs play an important role on superharmonic and subharmonic resonances of the carbon nanotube reinforced composite beams.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1338-1346
• /
• 2003

Three-dimensional formability of the thermoplastic laminar composite was studied according to manufacturing conditions. Five different types of the plain weave fabric were used as reinforcement with PET matrix. The square blank was made by press consolidation technique and formed in the type hemisphere. B-factor defined as the ratio of width of yarn and distance between yarns was used as the factor of formability in the type of plain weave fabric. The formability of PET/Glass fabric laminar composite was estimated in terms of forming rate and B-factor with the thickness distribution, area ratio of blank, and intra-ply shear angle. The thickness distribution across hemisphere was strongly affected by the B-factor, forming rate and blank thickness. The area ratio of blank was increased with B-factor, forming rate and blank thickness. Also, it was found that the intra-ply shear angle depends on the B-factor and forming rate.

• Composites Research
• /
• 제16권6호
• /
• pp.1-9
• /
• 2003

본 논문에서는 웨이블 분포 함수를 이용한 확률 파손 해석을 통해 복합재 압력 용기의 섬유 강도를 예측하였다. 그리고 섬유 강도의 크기 효과를 확인하고 해석의 타당성을 입증하기 위하여 섬유 인장 시편, 한 방향 복합재 시편과 복합재 압력 용기를 이용만 강도 시험이 수행되었다. 해석적 방법으로 웨이블 최약 링크 파손 모델과 다단계 연속 파손 모델을 이용하였고, 해석 결과를 상호 비교하였다. 크기 효과에 의해, 시편의 부피가 증가함에 따라 섬유 인장 강도가 감소하는 경향을 나타내었다. 해석을 통해 예측한 한 방향 복합재 시편과 복합재 압력 용기의 후프 층 섬유 강도 분포는 시험 값과 좋은 일치를 보였다. 섬유 강도의 크기 효과는 소재와 제작 공정 변수의 함수로서, 다른 소재 및 제작 공정에 대해서는 다른 크기 효과를 보이게 된다.

• Advances in aircraft and spacecraft science
• /
• 제4권6호
• /
• pp.679-699
• /
• 2017

The aim of this study is to perform a finite element analysis of the Von Mises stresses distribution in the adhesive layer and of the J-Integral for a damaged plate repaired by a composite patch. Firstly, we study the effect of the fiber orientation, especially the position of the layers that have orientation angle different of $0^{\circ}$ from the first layer which is in all cases of our study oriented at ($0^{\circ}$) on the J-Integral. Secondly, we evaluate the effects of the mechanical properties of the patch and the use of a hybrid patch on the reduction of stresses distribution and J-Integral. The results show clearly that the stacking sequence for the composite patch must be selected to absorb optimally the stresses from the damaged area and to position the various layers of the composite under the first layer whose fibers orientation will remain in all cases equal to $0^{\circ}$. The use of a hybrid composite reduces significantly the J-Integral and the stresses in both damaged plate and the adhesive layer.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.343-350
• /
• 1997

To fabricate the ceramic/metal(SiC/ Al alloy) composite, SiC preform was prepared by Pressureless Powder Packing Forming Method and 6061 Al alloy was infiltrated into the preform. Uniform compact having an average pore size of 10 ${\mu}{\textrm}{m}$ and narrow pore size distribution was prepared. Phenolic resin solution(40 wt%) was penetrated into the SiC compact, and then the compact was preheated at the temperature of 120$0^{\circ}C$. The pore size distribution and the microstructure of the preform were not changed by preheating. An uniform microstructure without any crack in the preform was obtained in SiC-Al alloy composite. The infiltration of 6061. Al alloy into the preform began at the temperature of 130$0^{\circ}C$ and the amount of infiltration increased in proportion to the infiltration temperature and the soaking time. The increasement rate of the infiltration amount decreased after 3 h. As a result of the infiltration at 140$0^{\circ}C$ for 4 h, Al alloy was well distributed in the interparticle channels and the relative density of the composite was above 98%. The strength and the fracture toughness of the composite were 303 MPa and 21.65 MPam1/2, respectively.

• Composites Research
• /
• 제20권5호
• /
• pp.7-12
• /
• 2007

본 논문에서는 골절치료의 효율을 높이기 위해 기존에 사용되는 고정판을 복합재료를 이용하여 설계하는 연구를 수행하였다. 복합재료 고정판의 크기와 모양은 기존 시술에 가장 많이 쓰이는 스테인리스 강 고정판의 한 제품과 동일하게 설계하여 연구를 수행하였다. 기존의 스테인리스 강 고정판과 복합재료의 고정판이 골절 부위에 시술되었을 경우 고정판의 재질에 따른 골절 계면부에 발생하는 변형률 분포의 변화를 계산하고 비교하였다. 각각의 계면부의 하중분포와 변형률은 유한요소해석을 통해 계산하였으며, 고정판이 사람의 하지에 시술된 후 환자가 보행하는 경우를 고려하여 하중조건을 부가하였다. 유한요소해석 결과 복합재료 고정판은 골절 부위의 변형률 분포를 보다 고르게 하며, 가골 형성을 촉진할 수 있는 환경을 제공하는 것을 밝혀내었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.22.1-22.1
• /
• 2000

• Applied Microscopy
• /
• 제46권3호
• /
• pp.155-159
• /
• 2016

This paper analyses the relationship between the distribution of a dielectric layer on the apex of a metal field electron emitter and the distribution of electron emission. Emitters were prepared by coating a tungsten emitter with a layer of epoxylite resin. A high-resolution scanning electron microscope was used to monitor the emitter profile and measure the coating thickness. Field electron microscope studies of the emission current distribution from these composite emitters (Tungsten-Clark Electromedical Instruments Epoxylite resin [Tungsten/CEI-resin emitter]) have been carried out. Two forms of image have been observed: bright single-spot images, thought to be associated with a smooth substrate and a uniform dielectric layer; and multi-spot images, though to be associated with irregularity in the substrate or the dielectric layer.