Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Formability of Thermoplastic Laminar Composite depending on the Types of- Fabric

Fabric 형태에 따른 열가소성수지 적층복합재료의 성형성

  • 신익재 (영남대학교 대학원 기계공학과) ;
  • 이동주 (영남대학교 기계공학과)
  • Published : 2003.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Three-dimensional formability of the thermoplastic laminar composite was studied according to manufacturing conditions. Five different types of the plain weave fabric were used as reinforcement with PET matrix. The square blank was made by press consolidation technique and formed in the type hemisphere. B-factor defined as the ratio of width of yarn and distance between yarns was used as the factor of formability in the type of plain weave fabric. The formability of PET/Glass fabric laminar composite was estimated in terms of forming rate and B-factor with the thickness distribution, area ratio of blank, and intra-ply shear angle. The thickness distribution across hemisphere was strongly affected by the B-factor, forming rate and blank thickness. The area ratio of blank was increased with B-factor, forming rate and blank thickness. Also, it was found that the intra-ply shear angle depends on the B-factor and forming rate.

Keywords

References

  1. Bersee, H. E. N. and Beukers, A., 2002, 'Diaphragm Forming of Continuous Fiber Reinforced Thermoplastics: Influence of Temperature, Pressure and Velocity on the Forming Upilex-R(R) Diaphragms,' Composites Part A: Applied Science and Manufacturing, Vol. 33, pp. 949-958 https://doi.org/10.1016/S1359-835X(02)00037-4
  2. Krebs, J. Friedrich, K. and Bhattacharyya, D., 1998, 'A Direct Comparison of Matched-die versus Diaphragm Forming,' Composites Part A: Applied Science and Manufacturing, Vol. 29, pp. 183-188 https://doi.org/10.1016/S1359-835X(97)82706-6
  3. Andersent, T. Logstrup, 1997, 'Development of a Rapid Press Consolidation Technique for Continuous Fibre Reinforced Thermoplastic Composites,' Proceeding of 18th Ris International Symposium on Materials Science, pp. 237-244
  4. Breuer, U., Neitzel, M., Ketzer, V. and Reinicke, R., 1996, 'Deep Drawing of Fiber-Reinforced Thermoplastic: Wrinkle Formation and Their Reduction,' Polymer Composites, Vol. 17, No. 4, pp. 643-647 https://doi.org/10.1002/pc.10655
  5. Murtagh, A. M. and Mallon, P. J., 1995, 'Shear Characterization of Unidirectional and Fabric-Reinforced Thermoplastics Composites for Pressforming Applications,' Proceedings of The 10th ICCM. Whistler. Vancouver
  6. Lim, T. C., Ramakrishna, S. and Shang, H. M. 1999, 'Axisymmetric Sheet Forming of Knitted Fabric Composite by Combined Stretch Forming and Deep Drawing,' Composites: Part B, Vol. 30, pp. 495-502 https://doi.org/10.1016/S1359-8368(99)00015-3
  7. Nakamura, Y. and Ohata, T., 1998, 'The Effect of Newly Developed Blank Holder on Press Forming of Glass-Cloth Reinforced Thermoplastic Sheet,' Key Engineering Materials, Vol. 137, pp. 40-46 https://doi.org/10.4028/www.scientific.net/KEM.137.40
  8. Qin, S., Shang, H. M., Tay, C. J. and Mo, J. X., 1996, 'An the Extent of Stretching during Deep Drawing,' Journal of Materials Processing Technology, Vol. 59, No. 4, pp. 386-390 https://doi.org/10.1016/0924-0136(95)02169-8
  9. Ramakrishna, S., Hamada, H., Cuong, N. K. and Maekawa, Z., 1995, 'Mechanical Properties of Knitted Fabric Reinforced Thermoplastic Composites,' Proceedings of The 10th ICCM, Vol. 4, pp. 245-252
  10. Allard, R., Charrier, J. M., Ghosh, A., Marangou, M., and Ryan, M. E., Shrivastara, S., and Wu, R., 1986, 'An Engineering Study of The Thermoforming Process: Experimental and Theoretical Consideration,' Journal of Polymer Engineering, Vol. 6, pp. 363
  11. Shin, I. J., Kim, D. Y. and Lee, D. J., 2000, 'Crystallinity and Mechanical Properties of Glass Fiber Reinforced Thermoplastic Composites by Rapid Press Consolidation Technique,' Key Engineering Materials, Vols. 183-187, pp. 1171-1176 https://doi.org/10.4028/www.scientific.net/KEM.183-187.1171
  12. Lee, Dong-Joo and Shin, Ick-Jae, 2002, 'Effects of Vacuum, Mold Temperature and Cooling Rate on Mechanical Properties of Press Consolidated Glass Fiber/PET Composite,' Composites Part A: Applied Science and Manufacturing, Vol. 33, Issue 8, pp. 1107-1114 https://doi.org/10.1016/S1359-835X(02)00051-9
  13. Ick-Jae Shin, Dong-Joo Lee and Hong-Gun Kim, 2002, 'Optimal Manufacturing Conditions of Glass Fiber Reinforced PET Matrix Composites by Rapid Press Consolidation Technique,' Trans. of KSME, A, Vol. 26, No. 5, pp. 813-821 https://doi.org/10.3795/KSME-A.2002.26.5.813

Cited by

  1. A Study on the Production of Carbon Fiber Composites using Injection-molding Grade Thermoplastic Pellets vol.25, pp.6, 2016, https://doi.org/10.5228/KSTP.2016.25.6.402