• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.237-247
• /
• 2005

It is necessary to forecast the various dismantling activities prior to dismantling nuclear facilities by using various software instead of a physical mock-up system because the dismantling in a contaminated with radioactivity cause the results of an unexpected situation. The component that needs to develop a dismantling mock-up system was examined. There are many component systems such as a decommissioning database system,3D dosimetric mapping that represents a distribution of a radionuclide contamination, a component of modeling for nuclear facility and devices include the decontamination and decommissioning. The research of software architecture about these components was carried out because these component systems that have been independently doesn't describe not only to visual an activities of Decontamination and Decommissioning(D&D) but also to evaluate it. The result was established an architecture that consist of an visualization module which could be visualized an D&D activities and a simulation module which can be evaluated a dismantling schedule and decommissioning cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.970-973
• /
• 2003

Recently, the development paradigm of enterprise information system has been moved from 2-tier environment to 3-tier environment. 3-tier environment makes possible to develop more efficient system in terms of the performance, extension, deployment and maintenance. The ship drawing process management system which manages a long-term drawing process and a great number of designers has to support an accuracy and a real-time of information but it is impossible because it is still served in 2-tier environment and some process of them is not developed yet. In this paper, we implemented the analysis and design of system based on CBD(Component Based Development) for the purpose of hanging the environment from two-dimensional Client/server architecture environment to COM＋ based 3-tier architecture environment. And by completing a development of total system, the productivity and the efficiency of the ship drawing process management system will be improved. And a wide reuse of components makes possible to improve the productivity and efficiency of system.

• Journal of KIISE:Software and Applications
• /
• v.32 no.5
• /
• pp.438-448
• /
• 2005

This paper proposes an adaptive tutoring system that provides learning materials dynamically according to the learners' teaming character and ability. Our system, in which a learning phase and a test phase are linked together, supports the personalized instruction-learning by providing the teaming materials by level in the learning phase according to the teaming ability estimated in the test phase. We design and implement a tutoring system consisted of an evaluation component and a learning component. An evaluation component uses a computerized adaptive test(CAT) based on item response theory to evaluate learners' ability while a learning component employs fuzzy level set theory so that teaming contents are provided to learners according to learners' level.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.789-798
• /
• 2001

ITS (Intelligent Transport Systems) is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Joining these technologies to the transportation system will save lives more safely, save time, and save money more efficiently. The National ITS Architecture provides a common framework for planning, defining, and integrating intelligent transportation systems. Most ITS projects are being designed and implemented in accordance with the National ITS Architecture, a reference framework that spans all of standards activities. Recently, as software technology is rapidly improved and stabilized, there are some needs to reuse pre-developed and powerful ITS technology. ITS standardization based on components and open interfaces becomes a way to solve these reusability of current ITS technology. This paper focuses on how could we design and implement the ITS component based on the National ITS Architecture. Furthermore, design and analysis of UML (Unified Modeling Language) was made through the ATIS (Advanced Traveller Information System) component development task and this UML methodology is expected to provide a standardized model for newly developed ITS components.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.241-257
• /
• 2003

XML is a global standard for the Internet and e-business, and its use is growing in proportion to the spreading speed of e-Commerce. Thus, a policy for providing more safe security service for exchanging e-documents within e-Commerce is necessary. XKMS, one of XML security specification, defines the protocol for distributing and registering public keys for verifying electronic signatures and enciphering e-documents of e-Commerce applications with various and complicate functions. In this paper, we propose X-KISS service reference model and implement service component based on standard specification. Also describes the analysis and security of XML key information service for safe e-Commerce, paying attention to the features of XML based security service. This reference model supported include public key location by given identifier information, the binding of such keys to identifier information. The client service component controls the number of locate threads and validate threads to analyze the minimum requirements of real-time key retrievals. This service modeling offers the security construction guideline for future domestic e-business frameworks.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.789-803
• /
• 2003

The purpose of this study is to compare the usefulness between Gaussian dispersion model and receptor model with the experimental result of the dispersion tracing of the particulate pollutants from Taean coal-fired power plants. For this purpose, the component analysis of the collected PM 10 samples was performed. In order to trace the pollution sources, factor analysis was done with the result of the component analysis. As a result of the correlativity analysis of the fifteen power plants' profiles offered by US EPA, the correlativity of No.11202 source profile showed highest rate up to 84.5%. Thus it was adopted as proper one and the contribution rate by each pollution source was calculated by Chemical Mass Balance (CMB)-8 model. The contribution rate, which was the effect rate of the power plants on each measuring point, were calculated with a range of 24∼52％ and the standard error was below 0.9 $\mu\textrm{g}$/㎥. This indicates the selection of the source profile was appropriate. Also, the concentrations of each point were calculated by the ISCST3 which is suggested by US EPA as one of the regulatory Gaussian dispersion model. The calculation result showed that the predicted concentration was 50∼58 $\mu\textrm{g}$/㎥, comparing with the measured result of 9∼65 $\mu\textrm{g}$/㎥. It was found that the concentration calculated by ISCST3 was underpredicted. It was thought that the receptor model was more favorable than the Gaussian dispersion model in estimating the effect of the particulate matter on a certain receptive point.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2001

We present a scheme and a data structure that decompose the space into adaptive-sized cells to improve the visualization of soft objects. Soft objects are visualized through the evaluation of the field functions at every point of the space. According to the propsed scheme, the affecting soft objects for a point in the space is searched through the data structure called interval tree based on the bounding volume of the components, which represent a soft object whose defining primitive(skeleton) is a simple geometric object such as point or line segment. The bounding volume of each component is generated with respect to the radius of a local field function of the component, threshold value, and the relations between the components and other neighboring components. The proposed scheme can be used in many applications for soft objects such as modeling and rendering, especially in interactive modeling process.

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.89-106
• /
• 2003

Analyses of tidal observations and a numerical model of the $M_2$ and $M_4$ tides in the Uldolmok waterway located at the southwestern tip of the Korean Peninsula are described. This waterway is well known fer its strong tidal flows of up to more than 10 knots at the narrowest part of the channel. Harmonic analysis of the observed water level at five tidal stations reveals dramatic changes in the amplitude and phase of the shallow water constituents at the station near the narrowest part, while survey results show a decreasing trend in local mean sea levels toward the narrow section. It was also observed that the amplitudes of semi-diurnal constituents, $M_2$ and $S_2$ are diminishing toward the narrowest part of the waterway. Two-dimensional numerical modeling shows that the $M_2$ energy flux is dominated by the component coming from the eastern boundary. The $M_2$ energy is inward from both open boundaries and is transported toward the narrow region of the channel, where it is frictionally dissipated or transferred to other constituents due to a strong non-linear advection effect. It is also shown that the $M_4$ generation is strong around the narrow region, and the abrupt decrease in the M4 amplitude in the region is due to a cancellation of the locally generated M4 with the component propagated from open boundaries. The superposition of both propagated and generated M4 contributions also explains the discontinuity of the M4 phase lag in the region. The tide-induced residual sea level change and the regeneration effect of the $M_2$ tide through interaction with $M_4$ are also examined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.263-272
• /
• 2016

Modular product design has contributed to flexible product modification and development, production lead time reduction, and increasing product diversity. Modular product design aims to develop a product architecture that is composed of detachable modules. These modules are constructed by maximizing the similarity of components based on physical and functional interaction analysis among components. Accordingly, a systematic procedure for clustering the components, which is a main activity in modular product design, is proposed in this paper. The first phase in this procedure is to build a component-to-component correlation matrix by analyzing physical and functional interaction relations among the components. In the second phase, network flow modeling is applied to find clusters of components, maximizing their correlations. In the last phase, a network flow model formulated with linear programming is solved to find the clusters and to make them modular. Finally, the proposed procedure in this research and its application are illustrated with an example of modularization for a vacuum cleaner.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.315-319
• /
• 2005

In this paper, we present a Petri Net (PN) model for reliability analysis of fault-tolerant database system models that consists of components one shared memory, bus, processors and database (disk). Each component can be failed and repaired individually. The system is operational as long as database and one of component is operational. We develop Stochastic Reward Net (SRN) Model for reliability analysis of database system. SRN is potential to define various reward functions. and can be easily used to obtain performance measures. The modeling techniques using variable cardinality, enabling function, timed transition priority in SRN are shown.