• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.714-717
• /
• 2007

본 연구는 국내 건설공사에서 발생되었던 최근 5년(2002${\sim}$2006)간 한국산업안전공단의 중대재해조사목록을 대상으로, 건설 중대재해의 공사종류별 현황을 직종, 경력, 발생형태, 발생시점별로 분석하여 국내 건설 중대재해의 프로젝트 유형별 발생특성을 도출함으로써 건설공사 현장에서 중대재해에 대한 안전계획 수립 및 관리활동과 관련된 정책수립에 활용될 수 있는 기초자료를 제시한다. 본 연구를 통해 발견된 사실들은 인간존중의 인도주의적 차원뿐만 아니라, 경제적으로도 건설재해예방의 토대를 확립하는데 직 ${\cdot}$ 간접적 기여를 하게 될 것이다. 기존에 건설재해예방을 위한 국가적차원의 노력에도 불구하고 건설재해가 여전히 감소추세를 보이지 않고 있으나, 본 연구는 국내 건설재해예방과 관련된 정책의 유효성을 향상시키는데 기여할 수 있다.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.161-171
• /
• 2007

With a rapid expansion of the elderly population, there is a greater demand for the construction of senior complexes. However, due to a land price increase and insufficient financial resources, accommodating such a demand is challenging. Also, as aging progresses, many elderlies tend to be isolated from local community, because of deteriorating health. As a result, constructing senior complexes is becoming an important community project. The construction of senior complexes in Korea has been started since early 2000, so it is still in the beginning stage in Korea. However, in the case of Japan, they have more experience in building such buildings. Therefore, in this study, 49 senior complexes in Japan were analysed, and the following spatial characteristics were derived. 1. By classifying senior complexes largely into a complex type with similar facilities and a complex type with different facilities, 12 types were derived. Depending on the types of facilities, basic sharing rooms and selectively sharing rooms by need are suggested. 2. Depending on 4 characteristics, such as spatial composition, entrance type, circulation form, and complex facility type, 17 types of senior complexes were derived, and the characteristics of each type are presented.

• Journal of Construction Engineering and Project Management
• /
• 제7권2호
• /
• pp.1-10
• /
• 2017

The Clonal Selection Algorithm (CSA) is an algorithm inspired by the human immune system mechanism. In CSA, several parameters needs to be optimized by large amount of sensitivity analysis for the optimal results. They limit the accuracy of the results due to the uncertainty and subjectivity. Adaptive Clonal Selection (ACS), a modified version of CSA, is developed as an algorithm without controls by pre-defined parameters in terms of selection process and mutation strength. In this paper, we discuss the ACS in detail and present its implementation in construction site utilization planning (CSUP). When applied to a developed model published in research literature, it proves that the ACS are capable of searching the optimal layout of temporary facilities on construction site based on the result of objective function, especially when the parameterization process is considered. Although the ACS still needs some improvements, obtaining a promising result when working on a same case study computed by Genetic Algorithm and Electimze algorithm prove its potential in solving more complex construction optimization problems in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 2부
• /
• pp.99-102
• /
• 2010

Today's construction is higher and more complex. So types and amounts of needed materials for construction project are increasing and those are occurred problems in construction site such as insufficient working space, confusion of materials handling order and working circulation. Because of those problems, research of progress management system using RFID+4D has been studied, but it is impossible to manage progress and material statement in real-time. So this study analyzed problems of current research and suggested VRML based RFID+4D Progress Management System. This Study focused on system basic concept and interface is designed for system development. This research is still progressing, so it has to do more development and research. However, it could be expected construction management efficiency and automation of management tasks.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.243-248
• /
• 2020

In addition to a range of H&S documentation, a range of actions, beliefs, interventions, practices, and states are important in terms of achieving optimum construction H&S. Conclusions include that H&S documentation facilitates and assists planning, organising, leading, controlling, and coordinating H&S. Furthermore, current H&S documentation: is inappropriate in that it can be complex, generic, lengthy, onerous, repetitive (duplicative), and vague; engenders dubious practices; generally, 'does not add the potential value'; shifts the focus from the physical process, and could be improved. Recommendations include: industry associations should review their 'audit system' to interrogate the allocation of points; H&S documents must reflect the intention of the requirement; the synergy between H&S documentation, and actions, interventions, and practices should be investigated, digested, and focused upon, and 'audits', or rather inspections, should focus more on the physical process, actions, interventions, and practices, than documentation.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.627-634
• /
• 2024

This research deals with the process of conducting a reinforced concrete slab loading test of a Residential Complex Project at the Shatt Al Arab District which is located in southern Iraq. The purpose of the test which represents a destructive test is to evaluate the structural behavior of the slab condition state during and after the examination of the test process in order to ascertain the ability of the slab ceiling to withstand the loads generated during the use of the building. The test was carried out accordant to ACI 437.2-13 code. The reason for this test is the postponed 8 years of building project construction. Concrete blocks were used to simulate and conduct a loading test of 30-tons for 3 days. The central point has been installed to measure the slab deflection that occurred during the test. The results showed that both the total deflection and residual deflections were lesser than the permissible values according to the ACI 437.2-13, the RC slab behavior was mainly linear structural behave, and that the purpose of the examination was achieved. Finally, a new method was introduced to the assessment of the slab condition at the support which is found in good condition.

• Asia pacific journal of information systems
• /
• 제13권1호
• /
• pp.103-118
• /
• 2003

Software project planning is usually represented by a project activity network that is composed of stages of tasks to be done and precedence restrictions among them. The project network is very complex and its construction requires a vast amount of field knowledge and experience. So this study proposes a case-based reasoning approach that can generate the project network automatically based on the past cases and modification knowledge. For the case indexing, we have adopted 17 factors, each with a few alternative values. A special structure of this problem is that the modification effort can be identified by each factor independently. Thus it is manageable to identify 85 primitive modification actions(add and delete activities) and estimate its modification efforts in advance. A specific case requires a combination of primitive modifications. Based on the modification effort knowledge, we have adopted the Least Modification approach as a metric of similarity between a new project and past cases. Using the Least Modification approach and modification knowledge base, we can automatically generate the project network. To validate the performance of Least Modification approach, we have compared its performance with an ordinary minimal distance approach for 21 test cases. The experiment showed that the Least Modification approach could reduce the modification effort significantly.

• 국제초고층학회논문집
• /
• 제4권1호
• /
• pp.85-90
• /
• 2015

Advances in the technology of computational design are giving architects and engineers the opportunity to analyze buildings with complex geometries. This study explores the optimization and automation process using the parametric design method, and uses digital tools to achieve surface representation and panelization for curved shaped office buildings. In this paper, we propose parametric algorithms of dimensional and geometric constraints using the Knowledge-ware scripts embedded in Gehry Technologies' Digital Project. The knowledge-based design methods proposed in this study can be used to systemize the knowledge possessed by experts in the form of data. Such knowledge is required to promote collaboration between designers and engineers in the process of CAD/CAE/CAM. The aim of this study is to integrate the process into design, which establishes an integrated process. This integration enables two-way feedback between design and construction data by combining the methods used in designing, engineering, and construction.

• 한국건설관리학회논문집
• /
• 제11권4호
• /
• pp.41-50
• /
• 2010

1960~70년대 도시의 무분별한 개발로 2000년대에 들어 도심은 공간 활용을 높이는 개발이 필요로 하게 되었다. 이에 2003년 도시 및 주거환경정비법이 개정되어 이전의 도심재개발사업 등이 도시환경정비사업으로 바뀌어 진행 되고 있다. 최근의 도시환경정비사업은 대형화 복합화의 대규모 사업으로 진행되고 있다. 이러한 사업은 다양한 참여 주제자, 이해관계자, 사업시행자 등 사이의 원활한 의사소통을 중요시 하고 있으나 표준화된 업무 절차가 없어 어려움이 있다. 이에 본 연구에서는 도시환경정비사업 중에 조합방식의 절치를 분석하고, BPMN(Business Process Modeling Notation) 모델링 방식을 통해 도식화하여 다양한 참여 주체자들에게 공통의 업무프로세스 모델을 제시함으로써 참여 주체자들이 절차를 쉽게 파악하고 이해할 수 있을 것으로 기대한다. 더 나아가 의사소통을 원활하게 하고 사업의 참여도를 높여 사업 기간을 단축하는 효과를 얻을 수 있을 것이다.

• 한국건설관리학회논문집
• /
• 제14권6호
• /
• pp.22-29
• /
• 2013

건설사업은 대형화, 복합화, 전문화되면서 목적물의 규모 및 범위가 점차 커지고 다수의 사업참여자가 수행하는 대규모 사업이 국내 외에서 지속적으로 발주되고 있다. 대규모 건설사업의 특성상 사업참여자들 간의 공정별, 분야별 간섭 및 충돌이 발생되면 해결을 위한 시간과 노력이 사업이 진행될수록 더 필요하다. 따라서, 본 연구에서는 인터페이스 해결을 위해 시간적, 물리적으로 유리한 설계단계의 인터페이스 관리방안에 대해 사례현장 적용내용을 바탕으로 제시하였다. 인터페이스 관리 협의체 구성, 체크리스트 도출, LIST 관리, PMIS 적용 등의 실제적인 관리방안을 통해 설계간섭 및 설계변경 관리 노하우가 필요한 타 현장에 적용하여 효과적인 사례로써 활용될 수 있을 것으로 기대된다.