• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.51-60
• /
• 1991

For the accurate run-out of a light rotor shaft the sliding bearings supplied with externally pressurized air are effectively applied, and it is important to predict the static and dynamic characteristics of rotor-bearing system. In this study direct numerical method is applied to solve the perturbed Reynolds' equation. To solve it the perturbed dimensionless mass flow rate is used as the boundary condition under the inherently-compensated restrictor. The dynamic characteristics of a rotor supported in the externally pressurized air bearings are analyzed, and as a result the orbit of the journal center is calculated. The theoretical results are investigated and discussed.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.813-820
• /
• 2018

This paper proposes new frame rate up-conversion algorithms. Adaptive motion estimation based on block complexity information are used to obtain more accurate motion vectors. Because the information on block complexity is extracted from the motion estimation prediction size from the original frame, additional computational complexity is not imparted. In experimental results, the proposed algorithms provide robust frame interpolation performance for whole test sequences. Also, the computational complexity of the proposed algorithm is reduced to a benchmark algorithm.

• Journal of Distribution Science
• /
• v.3 no.1
• /
• pp.69-90
• /
• 2005

In research of a paper, the comparative study of the various precedence management result evaluation indices tends to be made, and it is going to show the improvement bill of the new franchise headquarters management result evaluation index by the equilibrium result table which compensated the problem stated from the contents of precedence research about the existing franchise management result evaluation index, and was corrected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.683-687
• /
• 2000

Lighting is the most critical aspect of any machine vision application. Choosing the proper lighting scheme can result in increased accuracy, system reliablity, and response time. Many goof applications have failed for the lack of appropriate lighting. It is a serious and costly mistake to assume that inadequate lighting can be compensated for in an algorithm Therefore, this paper will cover the most commonly used forms of lighting methods.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.604-607
• /
• 2004

The on-orbit MTF for the electro-optical camera (EOC) of the KOMPSAT I was calculated from sampled image of edge target. The image derived MTF values are smaller than ground measurement values but meet original requirements of EOC. The MTF from MTF compensated image was larger than and ground measurement result.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.43-48
• /
• 2004

This paper suggests of utilizing both optimum coagulating and drainage conditions on mills to reduce the costs for sludge treatment of papermaking and transportation as well as leading to an effective treatment. It showed that CST method was much more effective than the time-consuming SRF since it compensated the demerits of the conventional drainage measuring method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.987-993
• /
• 1993

A loop-shaping LQ controller is synthesized for tandem cold mills. And a new loop-shaping technique is suggested for LQ controller design. The suggested loop-shaping LQ control system is compared with the standard loop-shaping LQ control system. The simulation results show that the thickness and interstand tension control accuracy of tandem cold mills can be improved by the compensated loop-shaping LQ controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.270-275
• /
• 1993

In this paper, the arc welding robot controller using a touch sensor and a arc sensor is presented. The controller is composed of robot controller parts for moving torch, and arc welding controller for welding and tracking. In the controller, an compensated data is generated to control robot trajectory and seam tracking by the arc sensor function. The data is obtained by integration of arc current. Experimental results are presented confirming the controller performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1103-1106
• /
• 1996

Disturbance Accommodating Attitude control logic for 3-axis stabilized spacecraft is designed and compared with PIID control logic. PID controller provide the zero steady error for constant disturbances. PIID controller detect and cancel disturbances upto the ramp input. PID control logic is designed as the main control logic. We designed the disturbance observer to detect the effect of disturbance using the sinusoidal function. The detected disturbance are compensated by the additional control logic. The comparison simulation is conducted between PIID and PIID with DAC. The simulation results show that PIID with DAC shows the better attitude pointing accuracy.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.