• 한국의류학회지
• /
• 제40권2호
• /
• pp.305-314
• /
• 2016

This paper investigated the applicable possibility of PTT and wool staple fibers to the air vortex system as high quality yarns for a high emotional and comfort garment. It was found that the tactile hand of vortex yarn knitted fabrics was harsher than ring and compact yarns knitted fabrics. It was observed that formability and sewability of air vortex yarn knitted fabrics seemed worse than ring and compact yarns due to low tensile and compressional resilience and high bending and shear hysteresis of air vortex yarn knitted fabrics. It revealed that wicking and drying rates of air vortex yarn knitted fabric were better than ring and compact yarns; in addition, the heat keepability of vortex yarn knitted fabric was higher than ring and compact yarns due to low thermal conductivity and max heat flow rate ($Q_{max}$). Any difference of thermal shrinkage between air vortex and ring yarn knitted fabrics was not shown, but pilling characteristic of air vortex yarn knitted fabric was superior. However, it was shown that wicking, drying, thermal property and pilling characteristics of air vortex yarn knitted fabric were superior due to air vortex yarn structure with parallel fibers in the core part and periodical and fasciated twists in the sheath part of the yarns.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.994-1001
• /
• 2007

Numerical analysis has been carried out to investigate air-side convective heat transfer characteristics in a compact heat exchanger with circular tubes and continuous plate fins. Simulation results such as air velocity and temperature distributions are presented, and heat transfer coefficients are compared with previous experimental correlations. Three models of standard and RNG $k-{\varepsilon}$, and Reynolds stress are applied for turbulence model applicability. Predicted heat transfer coefficient from the models of standard and RNG $k-{\varepsilon}$ are very close to those of the heat transfer correlations while there are relatively large difference, more than 17 percentage in the result from the Reynolds stress model. From the calculated results a correlation for Colburn j factor in the compact heat exchanger system is suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1333-1334
• /
• 2007

Page-oriented angle multiplexing Holographic data storage system is the one of promising techniques for high capacity and data transfer rate, but its size and narrow tilt margin is pointed as a demerit. To overcome this weak point, in this paper, 2-axis deck mechanism for compensation of disc is employed to Compact size Holographic Data Storage (CHDS) which consists of minimized optical components and small 2-axis actuator moving linear & angle direction. Compensation of radial/tangential disc tilt with 2-axis deck mechanism is demonstrated.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.441-449
• /
• 2000

Analysis, design and practical implementation of a single-stage electronic ballast for compact fluorecent lamps are presented in this paper. The proposed topology is based on a single-stage ballast which combines a boost converter and a half-bridge series resonant inverter. High power factor is achieved by using the boost semi-stage operating in discontinuous conduction mode, and inverter semi-stage operated above resonant frequency to provide zero voltage switching is employed to ballast the fluorescent lamp. Analytical and experimental results from the ballast system with 36W fluorescent lamps have demonstrated the feasibility of the proposed single-stage electronic ballast.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.140-142
• /
• 2005

This paper describes the current- based compact digital motor protective relay for low and high voltage induction motors, which are widely used in industrial and commercial power systems. The existing protective relays for motor protection had only overload, short circuit, reverse phase, open circuit and grounding protective elements, and measurement, start/stop control function. But in present day, for automation system, various functions are required, especially motor management and sequence control function and more. To meet these requirements, we developed an economic current-based compact digital motor protective relay which had various function to control, manage and monitor the induction motor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.207-211
• /
• 2009

To investigate the vibration characteristics of compact disc player(CDP) due to excited vibration and disturbances, it is necessary to consider the transmissibility of the CDP. The disturbances as well as the temperature in the vehicle are the one of the important factors when CDP is designed. In this study, the effect on the temperature of the oil damper, which is applied to anti-vibration system of the CDP, was investigated. When the temperature was changed from -30 to 90 and the properties of the oil damper (hardness of rubber, viscosity of oil) were changed, the transmissibility was measured.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.1-7
• /
• 2000

본 논문에서는 입-출력 모델로 표현되는 SISO(Single-Input-Single-Output) 비선형 시스템의 적응제어 기법을 제시한다. 시스템에 포함된 미지의 파라미터는 알고 있는 콤펙트(compact) 볼록(convex) 집합 내에 있다고 가정한다. 기존의 결과와는 달리 이 집합은 원점을 포함하는 원이나 초입방체(hypercube)를 포함한 임의의 콤펙트 볼록 집합이 될 수 있다. 제시하는 갱신(update) 법칙으로 얻어지는 파라미터 추정치는 항상 알고 있는 집합 내에 존재하며 이를 이용한 제어 입력을 적용하면 시스템의 출력과 원하는 신호와의 위치, 속도, 그리고 가속도 오차가 시간에 따라 영으로 수렴함을 이론적으로 그리고 시뮬레이션을 통하여 입증한다.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.967-972
• /
• 2009

To investigate the vibration characteristics of compact disc player(CDP) due to excited vibration and disturbances, it is necessary to consider the transmissibility of the CDP. The disturbances as well as the temperature in the vehicle are the one of the important factors when CDP is designed. In this study, the effect on the temperature of the oil damper, which is applied to anti-vibration system of the CDP, was investigated. When the temperature was changed from $-30^{\circ}C$ to $90^{\circ}C$ and the properties of the oil damper (hardness of rubber, viscosity of oil) were changed, the transmissibility was measured. When the damper rubber has the large hardness, the difference of the transmissibility and natural frequency due to temperature showed the remarkable change as compared with the those of damper viscosity.

• 천문학회보
• /
• 제38권1호
• /
• pp.56.2-56.2
• /
• 2013

Compact binaries are important sources of gravitational waves. They are also prime targets for long baseline laser interferometers. In this talk, we present latest progresses made in the Galactic merger rate calculations for compact binaries in the Galactic disk, with an emphasis on NS-NS binaries. For the first time, the non-recycled pulsar found in the Double Pulsar system (PSR J0737-3039B) is included in the rate calculation. We then discuss the prospects of detecting gravitational waves for Earth-based detectors such as advanced LIGO (Laser Interferometer Gravitational-wave Observatory) in US and advanced Virgo in Europe, extrapolating the Galactic rate estimates up to the detection volume of the advanced LIGO-Virgo network, Our results support the expectation that gravitational waves emitted from compact binary mergers will be detected within a decade. However, the detection rate of gravitational waves associated with NS-NS mergers is most likely to be several per year that is much smaller than what has been previously known.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.219-224
• /
• 2020

본 논문에서는 협소 공간에서 다중 빔 패턴 생성 및 제어를 위한 고집적 안테나에 대하여 고찰하였다. SPA (: Switched Parasitic Antenna) 안테나 구조의 기본적인 Dipole SPA와 Monopole SPA 구조의 특징과 성능을 도시하였고, Monopole SPA 안테나를 직접 제작하여 챔버 내에서 802.11g를 시스템에 적용하여 그 성능을 실측하였다. 상용 안테나 대비 제작한 SPA 안테나를 사용하여 평균 전송 속도를 측정하였을 때 최대 8.7배 우수한 성능이 나타남을 확인하였다.