Analysis and Design of Single-stage Electronic Ballast for a Compact Fluorescent Lamps

컴팩트 형광램프용 일단계 전자식 안정기의 해석 및 설계

  • 김종길 ((주)하나메카트로닉스 연구원) ;
  • 손영대 (동서대 정보통신공학부)
  • Published : 2000.06.01

Abstract

Analysis, design and practical implementation of a single-stage electronic ballast for compact fluorecent lamps are presented in this paper. The proposed topology is based on a single-stage ballast which combines a boost converter and a half-bridge series resonant inverter. High power factor is achieved by using the boost semi-stage operating in discontinuous conduction mode, and inverter semi-stage operated above resonant frequency to provide zero voltage switching is employed to ballast the fluorescent lamp. Analytical and experimental results from the ballast system with 36W fluorescent lamps have demonstrated the feasibility of the proposed single-stage electronic ballast.

Keywords

References

  1. 김능수 & 이상국, 최근 방전등 안정기의 기술현황, KINITI, 조사연구보고 1호(BW-1), 1992
  2. A.Maamoun, 'An Efficient High Frequency Electronic Ballast for Fluorescent Lamps', JIASC'95, Vol.IE-4, pp. E-17-E-22, 1995
  3. R.L.Steigerwald, 'A Comparison of Half-Bridge Resonant Converter Topologies', IEEE Trans. on Power Electronics, Vol.3, No.2, pp.174-182, April 1988 https://doi.org/10.1109/63.4347
  4. M.K.Kazimierczuk, 'Class D voltage-switching MOSFET power amplifier', IEE PROCs-B, Vol.138, No.6, pp. 285-296, Nov. 1991
  5. Yuji Takahashi, Masahiko Kamata & Keiichi Schimizu, 'Efficiency Improvement of Electronic Ballast', IEEE IAS'97, Vol.3, pp.2284-2290, Oct. 1997 https://doi.org/10.1109/IAS.1997.626382
  6. Kwang-Hwa Liu and Yung-Lin Lin, 'Current Waveform Distortion in Power Factor Correction Circuits Employing Discontinuous-Mode Boost Converters', IEEE PESC'89, pp.825-829, 1989 https://doi.org/10.1109/PESC.1989.48565
  7. J.L.Freitas Vieira, M.A.Co and L.D.Zorzal, 'High Power Factor Electronic Ballast Based in a Single Power Processing Stage', IEEE PESC'95, pp.687-693, 1995