Browse > Article
http://dx.doi.org/10.5850/JKSCT.2016.40.2.305

Wearing Performance and Comfort Property of PTT/Wool/Modal Air Vortex Yarn Knitted Fabrics  

Kim, Hyunah (Korea Research Institute For Fashion Industry)
Publication Information
Journal of the Korean Society of Clothing and Textiles / v.40, no.2, 2016 , pp. 305-314 More about this Journal
Abstract
This paper investigated the applicable possibility of PTT and wool staple fibers to the air vortex system as high quality yarns for a high emotional and comfort garment. It was found that the tactile hand of vortex yarn knitted fabrics was harsher than ring and compact yarns knitted fabrics. It was observed that formability and sewability of air vortex yarn knitted fabrics seemed worse than ring and compact yarns due to low tensile and compressional resilience and high bending and shear hysteresis of air vortex yarn knitted fabrics. It revealed that wicking and drying rates of air vortex yarn knitted fabric were better than ring and compact yarns; in addition, the heat keepability of vortex yarn knitted fabric was higher than ring and compact yarns due to low thermal conductivity and max heat flow rate ($Q_{max}$). Any difference of thermal shrinkage between air vortex and ring yarn knitted fabrics was not shown, but pilling characteristic of air vortex yarn knitted fabric was superior. However, it was shown that wicking, drying, thermal property and pilling characteristics of air vortex yarn knitted fabric were superior due to air vortex yarn structure with parallel fibers in the core part and periodical and fasciated twists in the sheath part of the yarns.
Keywords
Formability; Tactile hand; Wicking and drying rate; Thermal conductivity; Pilling;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Das, A., & Ishtiaque, S. M. (2004). Comfort characteristics of fabrics containing twist-less and hollow fibrous assemblies in weft. Journal of Textile and Apparel, Technology and Management, 3(4), 1-7.
2 Das, A., Kothari, V. K., & Balaji, M. (2007). Studies on cotton-acrylic bulked yarns and fabrics. Part I: Yarn characteristics. Journal of the Textile Institute, 98(3), 261-267. doi:10.1080/00405000701550163   DOI
3 Das, A., Zimniewska, M., & Mal, R. D. (2009). Studies on cotton-acrylic bulked yarns produced from different spinning technologies. Part II: Fabric characteristics. Journal of the Textile Institute, 100(5), 420-429. doi:10.1080/00405000701865009   DOI
4 Erdumlu, N., Ozipek, B., Oztuna, A. S., & Cetinkaya, S. (2009). Investigation of vortex spun yarn properties in comparison with conventional ring and open-end rotor spun yarns. Textile Research Journal, 79(7), 585-595. doi:10.1177/0040517508093590   DOI
5 Gordon, S. G., Horne, S. L., & Horne, F. A. (2005). The properties and structure of Murata vortex spun wool and woolblend yarns. Proceedings of the 11th International Yarns Textile Research Conference, England, 80-83.
6 Kane, C. D., Patil, U. J., & Sudhakar, P. (2007). Studies on the influence of knit structure and stitch length on ring and compact yarn single jersey fabric properties. Textile Research Journal, 77(8), 572-582. doi:10.1177/0040517507078023   DOI
7 Lee, D. H., Choi, K. L., Na, M. H., & Cha, H. C. (2012). Mechanical properties of PET/PTT/Rayon staple blended fabrics. Textile Science and Engineering, 49(2), 126-132. doi:10.12772/TSE.2012.49.2.126   DOI
8 Li, Q., Brady, P. R., Hurren, C. J., & Wang, X. G. (2008). The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns. Journal of the Textile Institute, 99(6), 561-568. doi:10.1080/00405000701692411   DOI
9 Mhetre, S., & Parachuru, R. (2010). The effect of fabric structure and yarn-to-yarn liquid migration on liquid transport in fabrics. The Journal of the Textile Institute, 101(7), 621-626. doi:10.1080/00405000802696469   DOI
10 Oxenham, W. (2002). Current and future trends in yarn production. Journal of Textile and Apparel, Technology and Management, 2(2), 1-6.
11 Ozturk, M. K., Nergis, B., & Candan, C. (2011). A study of wicking properties of cotton-acrylic yarns and knitted fabrics. Textile Research Journal, 81(3), 324-328. doi:10.1177/00 40517510383611   DOI
12 Suzuki, Y., & Sukigara, S. (2012). Mechanical and tactile properties of plain knitted fabrics produced from rayon vortex yarns. Textile Research Journal, 83(7), 740-751. doi:10.1177/0040517512467132   DOI
13 Sztandera, L. M., Cardello, A. V., Winterhalter, C., & Schutz, H. (2013). Identification of the most significant comfort factors for textiles from processing mechanical, handfeel, fabric construction, and perceived tactile comfort data. Textile Research Journal, 83(1), 34-43. doi:10.1177/0040517512438121   DOI
14 Unal, P. G. (2010). Investigation of some handle properties of fabrics woven with two folded yarns of different spinning systems. Textile Research Journal, 80(19), 2007-2015. doi:10.1177/0040517510369410   DOI
15 Zhao, L., Hu, H., & Wang, S. H. (2011). Fuzzy-integrative judgement on end-use performance of knitted fabrics made with polytrimethylene terephthalate blended yarns. Textile Research Journal, 81(17), 1739-1747. doi:10.1177/0040517511410103   DOI
16 Yanilmaz, M., & Kalaoglu, F. (2012). Investigation of wicking, wetting, and drying properties of acrylic knitted fabrics. Textile Research Journal, 82(8), 820-831. doi:10.1177/0040517511435851   DOI