• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.722-729
• /
• 2004

To analysis on the degradation of the satellite communication signal due to Asian dust that appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency bands of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in Icheon, Korea. The measured EIRP values were compared to the total dust density and dust particle distribution that were measured using PM 10 and OPC by the Korea Meteorological Administration, and the possible correlation between three sets data were analyzed.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.527-534
• /
• 2011

In the present paper, the characteristics of Mega-Flux$^{(R)}$, JNEX-Core$^{(R)}$, amorphous and ferrite cores are compared to the inductor of buck-boost converters for Hybrid Electric Vehicles. Core losses are analyzed at the condition of 10 kHz sine wave excitations, and permeability fluctuations vs. temperature and magnetizing force will be analyzed and discussed. Under the specifications of the buck-boost converter for 20 kW THS-II, the power inductor will be designed with Mega-Flux$^{(R)}$ and JNEX-Core$^{(R)}$, and informative simulation results will be provided with respect to dc bias characteristics, core and copper losses.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1051-1058
• /
• 2011

The military communication equipment is required the high reliability for operating adequate functions under severe conditions. This reliability is the essential element for the quality of the product, for the uncontrolled factors, such as the clearance, damage of the material, the reduction of stiffness, which are the designer is unable to handle. In this paper, the uncertainty for the dimension was supposed to the probability model for the military communication equipment, and the average of the objective function was minimized for reducing design uncertainty. The reliability-based design optimization which was implemented the limit state function was formulated into the mathematical model, so the reliable optimized structure was implemented than the base-line design.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.122-125
• /
• 2012

A video signal through a high-density optical link has been demonstrated to show the reliability of optical link for high-data-rate transmission. To reduce optical point-to-point links, an electrical link has been utilized for control and clock signaling. The latency and flicker with background noise occurred during the transferring of data across the optical link due to electrical-to-optical with optical-to-electrical conversions. The proposed synchronization technology combined with a flicker and denoising algorithm has given good results and can be applied in high-definition serial data interface (HD-SDI), ultra-HD-SDI, and HD multimedia interface transmission system applications.

• Journal of Sensor Science and Technology
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2014

In many medical image devices, dc noise often prevents normal diagnosis. In wireless capsule endoscopy systems, multipath fading through indoor wireless links induces inter-symbol interference (ISI) and indoor electric devices generate impulsive noise in the received signal. Moreover, dc noise, ISI, and impulsive noise are also found in optical fiber communication that can be used in remote medical diagnosis. In this paper, a blind signal processing method based on the biased probability density functions of constant modulus error that is robust to those problems that can cause error propagation in decision feedback (DF) methods is presented. Based on this property of robustness to error propagation, a DF version of the method is proposed. In the simulation for the impulse response of optical fiber channels having slowly varying dc noise and impulsive noise, the proposed DF method yields a performance enhancement of approximately 10 dB in mean squared error over its linear counterpart.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.110-116
• /
• 2009

The prominent advantages of Dual Material Surrounding Gate (DMSG) MOSFETs are higher speed, higher current drive, lower power consumption, enhanced short channel immunity and increased packing density, thus promising new opportunities for scaling and advanced design. In this Paper, we present Transconductance-to-drain current ratio and electric field distribution model for dual material surrounding gate (DMSGTs) MOSFETs. Transconductance-to-drain current ratio is a better criterion to access the performance of a device than the transconductance. This proposed model offers the basic designing guidance for dual material surrounding gate MOSFETs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1742-1744
• /
• 2016

In this letter, we prove equivalence of the Binary perturbation and Afterburner LDPC decoder that are proposed for improving the decoding performance in short length LDPC codes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.504-509
• /
• 2011

The military communication equipment is required the high reliability for operating adequate functions under severe conditions. This reliability is the essential element for the quality of the product, for the uncontrolled factors, such as the clearance, damage of the material, the reduction of stiffness, which are the designer is unable to handle. In this paper, the uncertainty for the design was supposed to the probability model for the military communication equipment, and the average of the objective function was minimized for reducing design uncertainty. The reliability-based design optimization which was implemented the limit state function was formulated into the mathematical model, so the reliable optimized structure was implemented than the base-line design.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.25-33
• /
• 2006

The reality of domestic prints neither possesses an objective standard of standard density nor a spectrophotometric method in regard to process ink. As a result, it creates a difficult communication between a designer and a Prepresser as to estimating the color of reproduction prints. There was an experiment on paper, ink, and printing company to obtain the standard point. The result shows that paper has minimum effect on color reproduction as opposed to ink and different printing companies, which had a great effect. The purpose of this paper is to confirm how different the color reproduction properties of prints are using densitometer and spectrophotometer for three different ink companies. The process color inks of three different companies were used under the same printing environment in this experiment.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.376-379
• /
• 2004

Operational orbit determination (OOD) depends on the capability of generating accurate prediction of spacecraft ephemeris in a short period. The predicted ephemeris is used in the operations such as instrument pointing and orbit maneuvers. In this study the orbit prediction problem consists of the estimating diverse arc length orbit using GPS navigation data, the predicted orbit for the next 48 hours, and the fitted 30-hour arc length orbits of double differenced GPS measurements for the predicted 48-hour period. For 24-hour orbit arc length, the predicted orbit difference from truth orbit was 205 meters due to the along-track error. The main error sources for the orbit prediction of the Low Earth Orbiter (LEO) satellite are solar pressure and atmosphere density.