• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.507-514
• /
• 2024

In the semiconductor manufacturing line, continuous efforts are being made to reduce the cost of products produced, and the demand for this is accelerating in the chemical mechanical polishing(CMP) process, and a representative example of these cost reduction items is the 5-Zone Ring. After about 150 hours of use in the CMP process, the thickness of the ring decreases to less than 1 mm and must be replaced with a new product. Therefore, in this study, bonding dispensers and press machines with a dispensing amount error of 10g±0.8% or less and a pressure uniformity of ±1.8% or less were developed to reduce semiconductor manufacturing costs by repeatedly regenerating worn parts of the retainer ring, and to minimize environmental pollution caused by industrial waste treatment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.847-852
• /
• 2014

As the scaling trend becomes accelerated in process technology for cost reduction in semiconductor chip manufacturing, the requirement for shrink technology has increased. Hot Carrier Injection (HCI) degradation for I/O transistors is most concerning part when shrink. To solve this, the effective channel length (Leff) was increased using liner oxide before Light Doped Drain (LDD) implants and optimized the tilt angle to increase Leff without E-field degradation in LDD region, satisfying the HCI specification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1245-1251
• /
• 2012

Recently, needs of recreational marine industry are consistently increasing due to increasing of income and pursuit on well-being. For these needs, central government and local governments have tried to build tens of marinas to meet demands and promote related industries. Therefore, need of smart pedestal system has also increased. However, domestic companies have not manufactured smart pedestal systems, so many pedestal systems have been imported from advanced countries such as England, Denmark, and Italy. This research has developed a smart pedestal system using IT convergence technology. This system is assembled by each several module which has its own function and board. Each module is not developed on an embedded OS. Instead, it has its customized operational software based on its kernel. Thus, this system brings about cost reduction of productions and maintenance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.49-54
• /
• 2009

This paper proposes a new approach to provide RF communication channel and electric power transmission to overcome the weakness of conventional tests, which may cause several problems. When an RF communication device is used to communicate between launch vehicle and launch complex in stead of using harness umbilical, it may draw the simplicity of ground test equipments, cost-saving, and the reduction of test time. In addition, if an RF power transmission device is adopted to supply on-board power of launch vehicle, it can replace expensive on-board batteries, which may be degraded easily by the repeated charging and discharging processes.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.550-558
• /
• 2013

In this paper, we propose an efficient hybrid lighting management system implementation on multiple protocol. The proposed hybrid lighting management system was implemented by configured as the data display part for management and control of lighting device and the data conversion-processing part the communication part of gateway. The data were designed the DB to enable to storage in real-time, and implemented able to manage by real time wireless remote control and schedule setting. The proposed an efficient hybrid lighting management system, it was possible the real-time monitoring and remote lighting control by peristalsis with smart devices and portable PC etc., and it could be obtained reduction effect of energy and electricity, communication cost.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.301-308
• /
• 2013

In this paper, we propose the hybrid lighting control system on multiple sensor. The proposed hybrid lighting control system was designed for management and control of street lightings by configured as the data display part of integration-interworking part, the data conversion-processing part of integrated management part, and the communication part of gateway system. The data are implemented to designing the DB to enable to storage in real-time by enable to monitoring by wireless remote control and schedule set. As a result of the efficiency verification of the proposed hybrid lighting control system, the hybrid lighting control system be to the real-time monitoring and remote lighting control was possible, because to peristalsis with smart devices and portable PC etc., and it could be obtained the effect of energy and electricity, communication cost reduction.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.252-256
• /
• 2001

The rapid development of communication equipment and information processing technology has led to a constant improvement in cordless communication. Lithium ion batteries used in cellular phones and laptop computers, in particular, have been in the forefront of the above revolution. These batteries use high value added raw materials and have a high and stable energy output and are increasingly coming into common use. The development of the material for the negative terminal has led to an improvement in the quality and efficiency of the batteries, whereas a reduction in the cost of the battery by researching new materials for the positive anode has become a research theme by itself. These long life batteries, it is being increasingly realized, can have value added to them by recycling. Research is increasingly being done on recycling the aluminum case and the load casing for the negative diode. This paper aims to introduce the current situation of recycling of lithium ion batteries. 1. Introduction 2. Various types of batteries and the situation of their recycling and the facts regarding recycling. 3. Example of cobalt recycling from waste Lithium ion secondary cell. 3-1) Flow Chart of Lithium ion battery recycling 3-2) Materials that make a lithium ion secondary cell. 3-3) Coarse grinding of Lithium ion secondary cell, and stabilization of current discharge 3-4) Burning 3-5) Grinding 3-6) Magnetic Separation 3-7) Dry sieving 3-8) Dry Classifying 3-9) Content Ratio of recycled cobalt parts 3-10) Summary of the Line used for the recovery of Cobalt from waste Lithium ion battery. 4. Conclusion.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.369-376
• /
• 2018

This paper presents an android-based implementation of real-time remote monitoring system for industrial gas turbines. The use of remote monitoring techniques can be beneficial in terms of not only the reduction of monitoring cost but also the earlier detection of abnormal status. In order to achieve the ability of protecting sensitive information from unauthorized persons, the proposed system supports secure transmissions using the RSA(Rivest Shamir Adleman) algorithm. In the event of abnormal situation on the gas turbine, the remote monitoring system generates an alarm to attract the user's attention by exploiting a push-message technique. The proposed system has been verified through a series of experiments with an experimental setup including a virtual data generator.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1101-1106
• /
• 2016

In this thesis, I developed a ball press pushing up equipment to solve the defect that occurs when the ball is inserted to the auto transmission. The ball press pushing up equipment is composed of heating device, thermostat which controls the heating device and the automated insertion device which helps to enhance mass production. This development contributes to quality improvement of domestic automobile production auto transmission part, and also contribute to cost reduction and sales increase for corporations.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.697-705
• /
• 2013

Emerging trends in the area of digital very large scale integration (VLSI) signal processing can lead to a reduction in the cost of the cochlear implant. Digital signal processing algorithms are repetitively used in speech processors for filtering and encoding operations. The critical paths in these algorithms limit the performance of the speech processors. These algorithms must be transformed to accommodate processors designed to be high speed and have less area and low power. This can be realized by basing the design of the auditory filter banks for the processors on digital VLSI signal processing concepts. By applying a folding algorithm to the second-order digital gammatone filter (GTF), the number of multipliers is reduced from five to one and the number of adders is reduced from three to one, without changing the characteristics of the filter. Folded second-order filter sections are cascaded with three similar structures to realize the eighth-order digital GTF whose response is a close match to the human cochlea response. The silicon area is reduced from twenty to four multipliers and from twelve to four adders by using the folding architecture.