• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.53-60
• /
• 2019

With the gradual in-depth use of social elements, music social networking has attracted more and more attention and discussion in the industry. Therefore, starting from the user experience theory and purchase intention theory, this paper explores the mechanism of user social experience and purchase intention in mobile music applications, and adds the mediating role of brand attachment on the basis of literature research. Based on previous studies on user experience measurement of social network and evaluation report of mobile music applications in the industry, and combined with in-depth interviews of users, whether the user experience of mobile music applications, which pays more and more attention to social elements, has an impact on purchase intention or not? What specific social experience can help form purchase intention? Are mediating variables at work? In practice, a total of 398 formal questionnaires were collected to obtain first-hand data. Later, reliability analysis, factor analysis and structural equation model test were carried out successively to verify the hypothesis. According to the results of empirical research, firstly, content experience, atmosphere experience and interactive experience in users' social experience of mobile music applications have a significant impact on brand attachment, secondly, atmosphere experience has a significant impact on purchase intention, and thirdly, brand attachment has a significant impact on users' purchase intention. Fourthly, brand attachment plays an intermediary role in the relationship between users' atmosphere experience and content experience and purchase intention. Based on the above research conclusions, the author puts forward corresponding marketing strategy Suggestions, which have certain guiding significance for mobile music applications to improve users' purchase intention, and have certain reference significance for the development of mobile music applications and the expansion of business model.

• KSBB Journal
• /
• v.28 no.6
• /
• pp.428-432
• /
• 2013

The antimicrobial properties of Light-Emitting Diode (LED) are an area of increasing interest. The aim of this study was to evaluate the bactericidal effects of blue (peak at 456 nm), green (peak at 518 nm), red (peak at 654 nm) and blue-green combined (blue 456 nm : green 558 nm = 69:31) LED irradiation to pathogenic bacteria. For this, LED equipment providing power density of $10mW/cm^2$ was installed and plates were exposed to 0.9 or $3.0mW/cm^2$ to irradiate bacteria with 3.2 to $259.2mW/cm^2$ of energy density. As a result, blue and combined LED have shown bactericidal effects on Escherichia coli KCTC 1467 and Listeria monocytogenes ATCC 19115 after irradiation of $3.0mW/cm^2$ for 2 and 4 hr, respectively. Staphylococcus aureus KCTC 1916 was inhibited at 518 nm green LED irradiation. However, red LED irradiation showed no inhibitory effect to the other tested strains. Light technology that utilizes the bactericidal properties of blue (at 456 nm) and blue-green(blue 456 nm : green 558 nm = 69:31) combined LED may have potential applications in the food industry sector.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.51.2-51.2
• /
• 2011

A novel electrospun nanofiber membrane was fabricated using combined poly (vinylphosphonic acid) (PVPA) and polyvinyl alcohol (PVA) intended for bone tissue engineering applications. PVPA is a proton-conducting polymer used as primer for bone implants and dental cements to prevent corrosion and brush abrasion. The phosphonate groups of PVPA have the ability to crosslink and attach itself to the hydroxyapatite surface facilitating faster integration of the biomaterial to the bone matrix. PVA was combined with PVPA to provide hydrophilicity, biocompatibility and improve its spinnability. To improve its mechanical strength, PVPA/PVA and neat PVA mixtures were combined to produce a multilayer scaffold. The physical and chemical properties of the of the fabricated matrix was investigated by SEM and TEM morphological analyses, tensile strength test, XRD, FT-IR spectra, swelling behavior and biodegradation rates, porosity and contact angle measurements. Biocompatibility was also examined in vitro by cytotoxicity and cell proliferation studies with MTT assay and cell adhesion behavior by SEM and confocal microscopy.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.989-1014
• /
• 2016

This paper deals with the analysis of the natural frequencies, mode shapes of an axially loaded beam system carrying ends consisting of non-concentrated tip masses and three spring-two mass sub-systems. The influence of system design and sub-system parameters on the combined system characteristics is the major part of this investigation. The effect of material properties, rotary inertia and shear deformation of the beam system is included. The end masses are elastically supported against rotation and translation at an offset point from the point of attachment. Sub-systems are attached to center of gravity eccentric points out of the beam span. The boundary conditions of the ordinary differential equation governing the lateral deflections and slope due to bending of the beam system including developed shear force frequency dependent terms, due to the sub.system suspension, have been formulated. Exact formulae for the modal frequencies and the modal shapes have been derived. Based on these formulae, detailed parametric studies are carried out. The geometrical and mechanical parameters of the system under study have been presented in non-dimensional analysis. The applied mathematical model is presented to cover wide range of mechanical, naval and structural engineering applications.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.267-274
• /
• 2010

Recently, the magnetorheological (MR) polishing process has been examined as a new ultra-precision polishing technology for mirror surface generation in many applications, such as aspheric lenses, biochips, micro parts, etc. This method uses MR fluids which contains micro abrasives as a polishing media, and can. It is possible to obtain nano level surface roughness under suitable process conditions, however, required polishing time is highly dependent on the applied pre-polishing methods due to its very small material removal rate. Thus, in this study, a combined polishing method is presented to reduce total polishing time for SUS304. First, the electropolishing (EP) method was applied to obtain fine surface roughness, and the MR polishing was followed. Surface roughness variations were investigated according to the process conditions. As the results of this study, it was possible to reduce total polishing time for SUS304 using the proposed combined polishing method.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.313-320
• /
• 2003

The governing equation of the post-buckling of shear-deformable uniform columns under a combined load consisting of a uniformly distributed axial load and a concentrated load at a free end was derived and the post-buckling analysis was investigated by using differential transformation. The loads were obtained for various end-slopes. The results obtained by the present method agree well with published results. In this paper, the differential transformation method was illustrated through its application to the non-linear differential equation of the post-buckling. It is expected that applications of the method to more challenging problems will are expected follow in future to ensue.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.494-502
• /
• 2001

GPS(Global Positioning System) and GLONASS(GLObal Navigation Satellite System) are basic technologies providing the information of the position and the time, and they have various applications such as navigation, survey, control, and so on. However, each GPS and GLONASS has limited number of visible satellites, and, from the view of strategy, it is undesirable to be heavily dependent on only one system. Thus, GPS/GLONASS combined receiver became required to obtain more precise navigation and system stability. In this paper, the RF front end of GPS/GLONASS combined receiver was fabricated on 130$\times$80 $\textrm{mm}^2$ PCB(Printed Circuit Board), and its system application was shown finally one chip possibility of GLONASS receiver is studied.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.162-163
• /
• 2022

Maritime transportation is going to transfer to alternative fuels as a result of the worldwide demands toward decarbonization and tougher maritime emissions regulations. Methanol is considered as a potential marine fuel, which has the ability to reduce SOx and CO₂ emissions, reduce climate change effects, and achieve the objective of green shipping. This work proposes and combines the innovative combination system of direct methanol solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), gas turbines (GT), and organic Rankine cycles (ORC) for maritime vessels. The system's primary power source is the SOFC, while the GT and PEMFC use the waste heat from the SOFC to generate useful power and improve the system's ability to use waste heat. Each component's thermodynamics model and the combined system's model are established and examined. The multigeneration system's energy and exergy efficiency are 76.2% and 30.3%, respectively. When compared to a SOFC stand-alone system, the energy efficiency of the GT and PEMFC system is increased by 19.2%. The use of PEMFC linked SOFC has significant efficiency when a ship is being started or maneuvered and a quick response from the power and propulsion plant is required.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.106.2-106.2
• /
• 2010

IGCC (Integrated Gasification Combined Cycle) plants are among the most advanced and effective systems for electric energy generation. From a control perspective, IGCC plants represent a significant challenge: complex reactions, highly integrated control to simultaneously satisfy production, controllability, operability and environmental objectives. While all these requirements seem clearly to demand a multivatiable, model predictive approach, not many applications can be easily found in the literature. This paper describes the IGCC dynamic simulation that is capable of simulating plant startup, shutdown, normal, and abnormal operation and engineering studies. This high fidelity dynamic models contain the detailed process design data to produce realistic responses to process operation and upset. And the simulation is used by engineers to evaluate the transient performance and produce graphical information indicating the response of the process under study conditions.

• Applied Microscopy
• /
• v.45 no.4
• /
• pp.189-194
• /
• 2015

Backside Ar ion milling technique for the preparation of cross-sectional transmission electron microscopy (TEM) specimens, and backside-ion milling combined with focused ion beam (FIB) operation for electron holography were introduced in this paper. The backside Ar ion milling technique offers advantages in preparing cross-sectional specimens having thin, smooth and uniform surfaces with low surface damages. The back-side ion milling combined with the FIB technique could be used to observe the two-dimensional p-n junction profiles in semiconductors with the sample quality sufficient for an electron holography study. These techniques have useful applications for accurate TEM analysis of the microstructure of materials or electronic devices such as arrayed hole patterns, three-dimensional integrated circuits, and also relatively thick layers (> $1{\mu}m$).