• Journal of Korea Game Society
• /
• v.19 no.6
• /
• pp.99-106
• /
• 2019

This paper addresses a method to compute the closest approach distance between two ellipsoids in their inter-center direction. This is the key technique for collision detection and response between ellipsoids. We formulate a set of conditions with the inter-center distance, the contact point and the contact normal vector of the two externally-contacting ellipsoids. The equations are solved robustly and efficiently using a hybrid of Newton's method and the bisection method with root bracketing. We demonstrate the robustness and efficiency of the proposed method in various experiments.

• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.32-41
• /
• 1999

In this research, internal-mixing twin-fluid atomizer using sonic energy is designed and manufactured. We are trying to intimate high efficiency twin-fluid atomizer to obtain good liquid atomization in the low pressure region. Define of geometric form of atomizer, characteristics of spray is influenced by position, depth and height variation of cavity resonator, variation of sound intensity and resonant sound frequency with liquid flow rate. The liquid atomization is promoted by multi-stage disintegration of mixing flow of gas with liquid and the optimum condition of position and depth of cavity resonator according to sonic energy is obtained from the condition at a=2.5mm and L=2mm. The velocity distribution of droplets shows negative value due to recirculation region at the center of axial, and as the radial direction distance is far, the velocity distribution of droplets decrease slowly after having a maximum value. However velocity and SMD show nearly uniform distribution at the down stream and as result compared to Nukiyama and Tanasawa's equation. atomization of mixing flow with air and liquid dispersing from the outlet of the nozzle is promoted by the effect of collision at the cavity resonator.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.299-307
• /
• 2011

The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF. The DCF controls the transmission based on CSMA/CA The BEB backoff algorithm of DCF shows relatively excellent performance in situation that the number of competing station is less, but has a problem that performance of throughput and delay is degraded in situation that the number of competing station is increased. This paper mathematically analyzes an MIMD backoff algorithm considering retry limit that increases the CW to doubled after collision and decreases smoothly the CW to halves after successful transmission in order to reduce the collision probability. To prove efficiency of the MIMD backoff algorithm, lots of simulations are conducted and analyzed.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.347-353
• /
• 2011

In HIPERLAN/2, the radio channels are assigned by AP(Access Point) that is centrally operated and the MAC protocol is based on TDMA/TDD. Mobile terminal that data transmission is necessary to uplink requests radio resource to AP through RCH channel. The changing number of RCHs in each MAC frame is important because too many RCHs may result in a waste of radio resources and too few RCHs may result in many access collisions and prolong time that connect to AP. Hence the number of RCH should be allocated properly according to traffic. From these point, this paper proposes an scheme that dynamically assigned the number of RCH which is based on the number of success and collision of message in previous MAC frame. To prove efficiency of proposed scheme, lots of simulations are conducted and analyzed.

• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2018

Reliable and accurate method of computationally aided design processes of advanced thin walled structures in automotive industries are much essential for the efficient usage of smart materials, that possess higher energy absorption in dynamic compression loading. In this paper, most versatile components i.e., thin walled crash tubes with different geometrical profiles are introduced in view of mitigating the impact of varying cross section in crash behavior and energy absorption characteristics. Apart from the geometrical parameters such as length, diameter and thickness, the non-dimensionalized parameters of average forces which control the plastic bending moment for varying thickness has explored in view of quantifying its impact on the crashworthiness of the structure. The explicit finite element code ABAQUS is utilized to conduct the numerical studies to examine the effect of parametric modifications in crash behavior and energy absorption. Also the simulation results are experimentally validated. It is evident that the circular cross-sectional tubes are preferable as high collision impact shock absorbers due to their ability in withstanding axial and oblique impact loads effectively. Furthermore, the specific energy absorption (SEA), crash force efficiency (CFE), plastic bending moment, peak force responses and its impact for optimally tailoring a design to cater the crashworthiness requirements are investigated. The primary outcome of the study is to provide sufficient information on circular tubes for the use of energy absorbers where impact oblique loading is expected.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.671-678
• /
• 2007

Front-side members of automobile, such as the hat shaped section members, are structures with the greatest energy absorbing capability in a front-end collision of vehicle. This paper was performed to analyze energy absorption characteristics of the hat shaped section members, which are basic shape of side member. The hat shaped section members consisted of the spot welded side member which was utilized to an actual vehicle and CFRP side member for lightweight of vehicle structural member. The members were tested under static axial loading by universal testing machine. Currently, stacking condition related to the collapse characteristics of composite materials is being considered as an issue fer the structural efficiency and safety of automobiles, aerospace vehicles, trains, ships even elevators during collision. So, energy absorption characteristics were analyzed according to stacking condition and shape of section and compared the results of spot welded side member with those of CFRP side member.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.195-213
• /
• 2012

In ubiquitous environments, the Intelligent Transportation System (ITS) protocol is a typical service used to improve the quality of life for humans. The Vehicular Ad-hoc Network (VANET) protocol, a part of ITS, needs further study with regards to its support for high reliability, high speed mobility, data transmission efficiency, and so on. The IEEE 802.11 standard provides a high data rate channel, but it was designed for peer-to-peer network protocols. IEEE 802.11p also provides a high data rate channel, however, it only facilitates communication between roadside and on-board equipment. A VANET has characteristics that enable its topology to change rapidly; it can also be expanded to a multi-hop range network during communication. Therefore, the VANET protocol needs a way to infer the current topology information relating to VANET equipped vehicles. In this paper, we present the Multi-Beacon MAC Protocol, and propose a method to resolve the problem of beacon collisions in VANET through the use of this Multi-Beacon MAC protocol. Evaluation of the performance of Multi-Beacon MAC protocol by means of both mathematical analyses and simulation experiments indicate that the proposed method can effectively reduce beacon collisions and improve the throughput and the delay between vehicles in VANET systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1569-1574
• /
• 2008

Almost all the RFID systems in the 13.56MHz ISM band adopt the FSA algorithm as the anti-collision algorithm. The FSA algorithm is based on the slotted ALOHA with a fixed frame size. The FSA, though simple, has a disadvantage that when the number of tags is variable, the system performance degrades because of the fixed frame size. Therefore, this paper proposes a new OFSA. The proposed OFSA algorithm dynamically allocates the optimal frame size at every frame based on the number of tags in the reader's identification range. According to the simulation results, the system efficiency of the proposed algorithm should be maintained optimally. Also, the proposed algorithm always obtained the minimum tag identification delay.

• Journal of Korea Game Society
• /
• v.19 no.1
• /
• pp.5-14
• /
• 2019

This paper presents a practical method to compute the closest approach distance of two ellipsoids in their inter-center direction. This is the key technique for collision handling in the dynamic simulation of rigid and deformable bodies approximated with ellipsoids. We formulate a set of equations with the inter-center distance and the contact point and normal for the two ellipsoids contacting each other externally. The equations are solved using fixed-point iteration and Aitken's delta-squared process. In addition, we introduce a novel stopping criterion expressed in terms of the error in distance. We demonstrate the efficiency and practicality of our method in various experiments.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.736-743
• /
• 2022

Construction workers experience a high rate of fatal incidents from mobile equipment in the industry. One of the major causes is the decline in the acoustic condition of workers due to the constant exposure to construction noise. Previous studies have proposed various ways in which audio sensing and machine learning techniques can be used to track equipment's movement on the construction site but not on the audibility of safety signals. This study develops a novel framework to help automate safety surveillance in the construction site. This is done by detecting the audio sound at a different signal-to-noise ratio of -10db, -5db, 0db, 5db, and 10db to notify the worker of imminent dangers of mobile equipment. The scope of this study is focused on developing a signal processing model to help improve the audible sense of mobile equipment for workers. This study includes three-phase: (a) collect audio data of construction equipment, (b) develop a novel audio-based machine learning model for automated detection of collision hazards to be integrated into intelligent hearing protection devices, and (c) conduct field experiments to investigate the system' efficiency and latency. The outcomes showed that the proposed model detects equipment correctly and can timely notify the workers of hazardous situations.