• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.139-156
• /
• 2023

The reinforced concrete lining in the hydraulic pressure tunnel tends to crack during the water-filling process. The lining will be detached from the surrounding rock due to the inner water exosmosis along concrete cracks. From the previous research achievements, the cohesive element is widely adopted to simulate the concrete crack but rarely adopted to simulate the lining-rock interface. In this study, the zero-thickness cohesive element with hydro-mechanical coupling property is not only employed to simulate the traditional concrete crack, but also innovatively introduced to simulate the lining-rock interface. Combined with the indirect-coupled method, the hydro-mechanical coupling algorithm of the reinforced concrete lining in hydraulic pressure tunnels is proposed and implemented in the finite element code ABAQUS. The calculated results reveal the cracking mechanism of the reinforced concrete lining, and match well with the observed engineering phenomenon.

• Advances in aircraft and spacecraft science
• /
• 제1권2호
• /
• pp.177-196
• /
• 2014

A theoretical exploration for determining the characteristic length of the cohesive zone for a double cantilever beam (DCB) specimen under mode I loading was conducted. Two traction-separation laws were studied: (i) a law with only a linear elastic stage from zero to full traction strength; and (ii) a bilinear traction law illustrating a progressive softening stage. Two analytical solutions were derived for the first law, which fit well into two existing solution groups. A transcendental equation was derived for the bilinear traction law, and a graphical method was presented to identify the resultant cohesive zone length. The study using the bilinear traction law enabled the theoretical investigation of the individual effects of cohesive law parameters (i.e., strength, stiffness, and fracture energy) on the cohesive zone length. Correlations between the theoretical and finite element (FE) results were assessed. Effects of traction law parameters on the cohesive zone length were discussed.

• International Journal of Aerospace System Engineering
• /
• 제7권1호
• /
• pp.7-15
• /
• 2020

In this paper the crack growth, modeling, and simulation of the stiffened and un-stiffened cracked panels presented using commercially available finite element software packages. Computation of stresses and convergence of stress intensity factor for single edge notch (SEN) specimens carried out using the finite element method (FEM) and extended finite element method (XFEM) and compared with an analytical solution. XFEM techniques like cohesive segment method and LEFM using virtual crack closure technique (VCCT), used for crack growth analysis and presented results for un-stiffened and stiffened panels considering various crack domain. The non-linear analysis considering both geometric and material non-linearity on stiffened panels with various stringers like a blade, L, inverted T and Z sections the results were presented. Arrived at the optimum stringer section type for the considered panel under axial loading from the numerical analysis.

• Composites Research
• /
• 제34권1호
• /
• pp.30-34
• /
• 2021

This paper present a three-dimensional unit cell finite element analysis to predict the pull-out behavior of a single stitch in a composite laminate. The stitching process used for this study correspond to the I-fiber stitching method that has been studied by the Composite Structures Lab (CSL) as a new through-thickness reinforced method. A total of six cases were analyzed, which were divided in two groups by the stitching yarn used, 6k and 12k. Each group of cases have three different thickness according to the amount of plies; 16 plies, 32 plies and 64 plies. The finite element analysis used the cohesive zone method to characterize the single stitch reinforcement in the interface. Due to the complexity of the load vs displacement curves taken from the experimental results, a bilinear and trilinear bridging laws were implemented in the models. The cohesive parameters used for each case showed a good agreement with the experimental data and can be used for future studies.

• 한국지반환경공학회 논문집
• /
• 제18권2호
• /
• pp.53-58
• /
• 2017

본 연구에서는 ABAQUS(2014)를 이용한 다공질 매체의 혼합유한요소해석에서 요소 간의 분리를 모사할 수 있는 방법을 제안한다. ABAQUS에서는 변위과 간극수압(u-p모델)의 자유도를 갖는 혼합유한요소의 분리를 standard(implicit) 버전 상에서 cohesive element와 함께 해석을 제안하지만, 요소 간의 이탈, 강체운동, 접촉 등과 같은 분리현상에 대해서는 경계조건 문제로 수치 해석상 한계가 있다. ABAQUS-explicit 해석에서는 경계조건 문제에 대해 자유롭지만 지금까지의 혼합요소 간의 분리를 제공하고 있지 않다. 그러므로, 본 연구에서는 ABAQUS-explicit 상에서 u-p 모델에 대한 분리를 모사할 수 있는 새로운 접근방법이 제안된다. VUMAT 서브루틴을 통하여 구성모델이 적용되고, 간극수압 변화에 따른 요소의 분리 조건을 판단한다. 그리고 VDISP 서브루틴을 통하여 요소의 분리를 발생시킨다. 이렇게 제안된 알고리즘은 간단한 2차원 다공질 매체 예제를 통하여 구현된다.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권1호
• /
• pp.36-44
• /
• 2006

연안해역에서 점착성 퇴적물의 수송과정을 수치모의하였다. 복잡한 지형을 가진 연안해역에 효과적인 유한요소모형 이 해수유동과 퇴적물 수송을 모의하기 위해 수립되었다. 침식률을 기존 연구결과 및 바닥퇴적물 시료의 물리특성 분석자료를 가지고 편리하게 결정하였으며, 모의결과는 관측된 부유사 농도의 시간변화와 잘 일치하는 양호한 계산 결과를 보였다, 따라서 본 연구에서 사용한 침식률 결정방법이 퇴적물 수송모의에 효과적으로 활용될 수 있음을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.286-290
• /
• 2008

본 논문은 고체 추진 로켓의 연소 중에 발생하는 고체추진체의 동적 파괴 현상 및 유체-구조 상호작용을 시뮬레이션 하기 위한 프로그램 개발에 대한 것이다. 개발된 프로그램은 구조해석을 위한 CVFE (cohesive Volumetric Finite Element) 방법과 외재적 ALE (Arbitrary Lagrangian Eulerian) 방법을 응용한 유한요소법 코드와 유동해석을 위한 외재적 비정렬 유한 체적 오일러 코드(Explicit Unstructured Finite Volume Euler code)로 구성된다. 개발된 프로그램의 또 다른 중요한 특징은 균열의 전파와 고체추진체의 변형에 따라 생기는 추진제 형상의 대변형이 발생할 때, 새로 생긴 유체 영역에서의 격자의 확장과 복구되는 능력이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.395-402
• /
• 2004

The extended finite element scheme applied to crack problems is reviewed in this paper. As the enrichments of the solution space and the basic formulation are discussed, several examples of the application of the method are given. The examples include a LEFM crack, a cohesive crack, multiple LEFH cracks and dynamic crack propagation problems. It is shown that the extended finite element method is one of the powerful tools to study crack problems.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.919-926
• /
• 2014

본 논문에서는 재료의 물성에 따른 파괴 거동을 응집영역모델과 확장유한요소법을 이용하여 예측하였다. 중앙에 경사진 초기 균열을 가지는 직사각형 시편 형상에 대해 평면응력요소로 모델링하고 인장하중을 가하여 균열의 전파 거동을 모사하였다. 파손 진전이 예측되는 지역에 대해 응집영역모델링 해석에서는 모든 일반 요소들 사이에 응집요소를 삽입하였고, 확장유한요소해석에서는 요소확장영역으로 지정하였다. 취성과 소성 재료에 대해 파괴 형태를 예측하고 파괴 강도를 계산하였다. 시편의 두께가 매우 얇은 경우에 기하학적 비선형 후좌굴해석 기법으로 주름변형을 고려하였고 주름이 파괴 거동에 미치는 영향을 조사하였다.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.395-407
• /
• 2022

In this paper, cracks with different angles are prefabricated in rock specimens to study the fracture characteristics of rock based on CT images. The rock specimens are prepared for compression tests according to the standard recommended by ISRM (International Society for Rock Mechanics). The effects of different angles on rock mechanical properties and crack propagation fracture modes are analyzed. Then, based on the cohesive element method and CT images, the relationship between porosity and Young's modulus as well as the fracture property is explored by the numerical modelling. In the modelling, the distribution of Young's modulus is determined by the CT image through the field variable method. The results show that prefabricated cracks reduce the mechanical properties of rock. The closer the angles of the prefabricated crack is, the greater the Young's modulus of the rock sample is. The failure process of each specimen with prefabricated cracks is formed by the initiation and propagation of crack, and the angle of the prefabricated crack will affect the type of extended crack. As part of the numerical model proposed in this paper, the microstructure of rocks is reflected by CT images. The numerical results verify the effectiveness of the cohesive element method in the study of crack propagation for rock. The rock model in this paper can be used to predict engineering disasters such as collapse and landslide caused by rock fracture, which means that the methodology adopted in this paper is comprehensive and important to solve rock engineering problems.