• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.799-818
• /
• 2014

Spectrum sensing is a key technical challenge for cognitive radio (CR). It is well known that multi-cycle cyclostationarity (MC) detector is a powerful method for spectrum sensing. However, conventional MC detector is difficult to implement due to its high computational complexity. This paper pays attention to the fact that the computation complexity can be reduced by simplifying the test statistic of conventional MC detector. Based on this simplification process, an improved MC detector is proposed. Compared with the conventional one, the proposed detector has the low-computational complexity and sufficient-accuracy on sensing performance. Subsequently, the sensing performances are further investigated for the cases of Rayleigh, Nakagami-m, Rician, composite Rayleigh fading-lognormal shadowing and composite Nakagami fading-lognormal shadowing channels, respectively. Furthermore, the square-law combining (SLC) is introduced to improve the detection capability over fading-shadowing channels. The corresponding closed-form expressions of average detection probability are derived for each case by the moment generation function (MGF) approach. Finally, illustrative and analytical results show that the efficiency and reliability of proposed detector and the improvement on sensing performance by SLC over composite fading-shadowing channels.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.641-646
• /
• 2011

In this paper, we investigate a power control problem which is very critical in underlay-based spectrum sharing systems. Although an underlay-based spectrum sharing system is more efficient compared to an overlay-based spectrum sharing system in terms of spectral utilization, some practical problems obstruct its commercialization. One of them is a real-time-based power adaptation of secondary transmitters. In the underlay-based spectrum sharing system, it is essential to adapt secondary user's transmit power to interference channel states to secure primary users' communication. Thus, we propose a practical power control scheme for secondary transmitters. The feedback overhead of our proposed scheme is insignificant because it requires one-bit signaling, while the optimal power control scheme requires the perfect information of channel states. In addition, the proposed scheme is robust to feedback delay. We compare the performance of the optimal and proposed schemes in terms of primary user's outage probability and secondary user's throughput. Our simulation results show that the proposed scheme is almost optimal in terms of both primary user's outage probability and secondary user's throughput when the secondary user's transmit power is low. As the secondary user's transmit power increases, the primary user's outage probability of the proposed scheme is degraded compared with the optimal scheme while the secondary user's throughput still approaches that of the optimal scheme. If the feedback delay is considered, however, the proposed scheme approaches the optimal scheme in terms of both the primary user's outage probability and secondary user's throughput regardless of the secondary user's transmit power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.361-366
• /
• 2012

This paper proposes a low power capacitor cross-coupled 5.2 GHz band low noise amplifier(LNA) using the current-reused topology with the TSMC 0.18 ${\mu}m$ CMOS process. The proposed 5.2 GHz band LNA uses a capacitor cross-coupled $g_m$-boosting method for reducing current flow of circuit and a current-reused topology to decrease total power dissipation. The parallel LC networks are used to reduce size of spiral inductors. The simulation results show high gain of 17.4 dB and noise figure(NF) of 2.7 dB for 5.2 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.810-816
• /
• 2014

The alternative binary offset carrier (AltBOC) signal shares frequency spectrum with the phase shift keying (PSK) signal, enabling us to manage the satellite communication spectrum more efficiently. However, the side-peaks in the AltBOC autocorrelation pose an ambiguity in the AltBOC signal tracking, and consequently, makes the frequency sharing via the AltBOC difficult. Therefore, in this paper, we propose a cancellation scheme of the AltBOC correlation side-peaks. From the numerical results, it is confirmed that the proposed scheme removes the ambiguity in signal tracking caused by the side-peaks completely, and thus, has a much lower tracking error standard deviation (TESD) (i.e., a much better tracking performance) than the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.59-68
• /
• 2010

In this paper, we present a new method to complete Dynamic Spectrum Access by modifying the reward function. Partially Observable Markov Decision Process (POMDP) is an eligible algorithm to predict the upcoming spectrum opportunity. In POMDP, Reward function is the last portion and very important for prediction. However, the Reward function has only two states (Busy and Idle). When collision happens in the channel, reward function indicates busy state which is responsible for the throughput decreasing of secondary user. In this paper, we focus the difference between busy and collision state. We have proposed a new algorithm for reward function that indicates an additional state of collision which brings better communication opportunity for secondary users. Secondary users properly utilize opportunities to access Primary User channels for efficient data transmission with the help of the new reward function. We have derived mathematical belief vector of the new algorithm as well. Simulation results have corroborated the superior performance of improved reward function. The new algorithm has increased the throughput for secondary user in cognitive radio network.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2016

Feature detection is recognized as an accurate spectrum sensing approach when the information of the desired signal is partly known at the receiver. This type of detection was proposed to overcome large noise environment. Cyclostationary detection is an example of feature detection in spectrum sensing technique in cognitive radio. However, the cyclostationary process calculation requires a lot of processing time and information about the designed signals. On the other hand, energy detection spectrum sensing is widely known as a simple and compact spectrum sensing technique. However, energy detection is highly affected by large noise and lead to high detection error probability. In this paper, the combination of energy detection and cyclostationary is proposed in order to increase the accuracy and decrease the calculation and processing time. The two-layer threshold is utilized in order to reduce the complexity of computation and processing time in cyclostationary which can lead to the improved throughput of the system. The simulation result shows that the implementation of energy-based cyclostationary detector can help to improve the performance of the system while it can considerably reduce the required time for signal detection.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.378-384
• /
• 2009

In this paper, we consider a cyclostationary-feature-detection based spectrum sensing algorithm for ATSC signal detection. One of the proposed algorithms for IEEE 802.22 standardization organization which meet the requirements of IEEE 802.22 is Thomson's algorithm based on cyclostationary feature detection. We propose an interpolation-based spectrum sensing algorithm for ATSC signal detection, which has less computation complexity than that of Thomson's algorithm and provides no performance loss compared to Thomson's algorithm. By using zero-padding in time domain and effective sensing scanning method, the proposed algorithm requires less computational complexity and shows no performance degradation compared to Thomson's algorithm.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.53-58
• /
• 2007

The Satellite Mobile Communication System holds several advantages, such as wide coverage that guarantees the communication in a huge area. It is suitable in the ocean and forest and especially in emergency situation. However, the licensed frequency is not always occupied within all coverage and all the time. The actual utilization rate is relatively low compared to other wireless communications such as cellular systems. There are a large amount of white spaces in its coverage. Therefore, it is necessary to consider introducing additional services such as data communication, in order to increase the spectrum utilization as well as the revenue of the Satellite service provider. In this paper, we first analyze the possibility to implement new services in the licensed band of satellite mobile phone by its provider. Then we address the most significant issue for the implementation of current service, which is how to accurately detect the satellite mobile terminals. Finally, we suggest two new possible solutions namely, eigenvalue detection based methods to find out the existence of transmitted signal from the satellite mobile terminals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1050-1057
• /
• 2012

Super Wi-Fi is a newly emerging wireless Internet technology, which constitutes Wi-Fi networks using TV white space. A key technical challenge in the Super Wi-Fi applications is how to provide a seamless Internet service even when a Super WiFi user should give up the channel in use to the active incumbent user which is activated in the same service area, preventing from the service continuity in Super Wi-Fi. In this paper, we propose a channel handover method to support service continuity of Super Wi-Fi, in which an AP selects a new operational channel and provides the channel information for MSs. Therefore, the AP and the MSs can carry out seamless handover for Super Wi-Fi service. A performance evaluation shows that the proposed scheme is superior to the conventional Wi-Fi in channel mobility delay.